Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.1/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo", uses=false)
Using package TransiEnt with version 2.0.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo)
Using package DataFiles with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo)
Using package Design with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Using package Modelica_StateGraph2 with version 2.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo)
Using package Modelica_LinearSystems2 with version 2.4.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo)
Using package ModelicaReference with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo)
Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Using package Buildings with version 9.1.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.1/package.mo)
Running command: translateModel(TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled,tolerance=1e-06,outputFormat="empty",numberOfIntervals=70080,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled")
translateModel(TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled,tolerance=1e-06,outputFormat="empty",numberOfIntervals=70080,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.1/package.mo): time 2.141/2.141, allocations: 389 MB / 408.7 MB, free: 13.22 MB / 318.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0005033/0.0005033, allocations: 39.94 kB / 0.4886 GB, free: 5.484 MB / 398.1 MB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo): time 0.7017/0.7017, allocations: 127.2 MB / 0.7021 GB, free: 6.121 MB / 0.4981 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo): time 0.1018/0.1018, allocations: 22.38 MB / 0.8388 GB, free: 17.02 MB / 0.5294 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo): time 0.01214/0.01214, allocations: 0.8764 MB / 0.9606 GB, free: 4.086 MB / 0.6388 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo): time 0.2494/0.2494, allocations: 45.03 MB / 1.126 GB, free: 98.41 MB / 0.6544 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo): time 0.08222/0.08222, allocations: 13.55 MB / 1.269 GB, free: 93.99 MB / 0.6544 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001023/0.001023, allocations: 106.2 kB / 1.402 GB, free: 7.867 MB / 0.7013 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001279/0.001279, allocations: 186.1 kB / 1.535 GB, free: 222.7 MB / 0.8263 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.466/1.466, allocations: 222.9 MB / 1.885 GB, free: 92.25 MB / 0.8888 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo): time 0.0005337/0.0005339, allocations: 35.83 kB / 2.066 GB, free: 15.87 MB / 0.92 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo): time 0.000553/0.0005531, allocations: 27.89 kB / 2.247 GB, free: 6.195 MB / 1.092 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo): time 1.109/1.109, allocations: 220.7 MB / 2.644 GB, free: 132.7 MB / 1.123 GB
Warning: Requested package TILMedia of version 1.8.0 ClaRa, but this package was already loaded with version 1.8.1 ClaRa. OpenModelica cannot reason about compatibility between the two packages since they are not semantic versions.
Warning: TransiEnt requested package ClaRa of version 1.8.0. ClaRa 1.8.1 is used instead which states that it is only compatible with a conversion script. Use convertPackageToLibrary(TransiEnt, ClaRa, "1.8.1") to run the conversion script or proceed with potential issues as a result.
Notification: TransiEnt requested package Buildings of version 9.0.0. Buildings 9.1.1 is used instead which states that it is fully compatible without conversion script needed.
Notification: Performance of FrontEnd - loaded program: time 0.01001/0.01001, allocations: 303.3 kB / 2.892 GB, free: 112.3 MB / 1.123 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.37/0.3801, allocations: 229.4 MB / 3.116 GB, free: 11.09 MB / 1.233 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled): time 0.1018/0.4819, allocations: 110.7 MB / 3.224 GB, free: 12.01 MB / 1.342 GB
Notification: Performance of NFInst.instExpressions: time 0.09786/0.5798, allocations: 55.71 MB / 3.279 GB, free: 4.141 MB / 1.389 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.02241/0.6023, allocations: 0.5597 MB / 3.279 GB, free: 3.578 MB / 1.389 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/SimCenter.mo:69:5-70:35:writable] Warning: Connector cycleSumPort is not balanced: The number of potential variables (0) is not equal to the number of flow variables (4).
Notification: Performance of NFTyping.typeComponents: time 1.329/1.931, allocations: 13.5 MB / 3.292 GB, free: 17.21 MB / 1.389 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Basics/Functions/fullPathName.mo:2:1-78:17:writable] Warning: Pure function 'TransiEnt.Basics.Functions.fullPathName' contains a call to impure function 'Modelica.Utilities.Streams.print'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:524:13-528:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_pTxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEnthalpy_pTxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:177:13-181:19:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.density_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.density_phxi'.
Notification: Performance of NFTyping.typeBindings: time 0.04423/1.976, allocations: 18.38 MB / 3.31 GB, free: 16.52 MB / 1.389 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:94:5-94:38:writable] Warning: Conditional component 'y1' is used in a non-connect context.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:100:5-100:49:writable] Warning: Conditional component 'y1' is used in a non-connect context.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:94:5-94:38:writable] Warning: Conditional component 'y1' is used in a non-connect context.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:100:5-100:49:writable] Warning: Conditional component 'y1' is used in a non-connect context.
Notification: Performance of NFTyping.typeClassSections: time 0.04209/2.018, allocations: 18.82 MB / 3.329 GB, free: 16.14 MB / 1.389 GB
Notification: Performance of NFFlatten.flatten: time 0.08212/2.1, allocations: 64.77 MB / 3.392 GB, free: 0.7344 MB / 1.389 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.04144/2.141, allocations: 23.62 MB / 3.415 GB, free: 2.223 MB / 1.405 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.04429/2.186, allocations: 23.91 MB / 3.438 GB, free: 5.984 MB / 1.42 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.04204/2.228, allocations: 25.38 MB / 3.463 GB, free: 1.973 MB / 1.436 GB
Notification: Performance of NFPackage.collectConstants: time 0.01371/2.242, allocations: 3.711 MB / 3.467 GB, free: 14.26 MB / 1.452 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.02329/2.265, allocations: 5.303 MB / 3.472 GB, free: 9.082 MB / 1.452 GB
Notification: Performance of NFScalarize.scalarize: time 0.02202/2.287, allocations: 15.57 MB / 3.487 GB, free: 9.668 MB / 1.467 GB
Notification: Performance of NFVerifyModel.verify: time 0.04352/2.331, allocations: 23.27 MB / 3.51 GB, free: 2.453 MB / 1.483 GB
Notification: Performance of NFConvertDAE.convert: time 0.07655/2.407, allocations: 62.38 MB / 3.571 GB, free: 5.711 MB / 1.545 GB
Notification: Performance of FrontEnd - DAE generated: time 6.221e-06/2.407, allocations: 3.938 kB / 3.571 GB, free: 5.707 MB / 1.545 GB
Notification: Performance of FrontEnd: time 1.754e-06/2.407, allocations: 0 / 3.571 GB, free: 5.707 MB / 1.545 GB
Notification: Performance of Transformations before backend: time 0.001827/2.409, allocations: 4 kB / 3.571 GB, free: 5.703 MB / 1.545 GB
Warning: Alias equations of external objects are not Modelica compliant as in:
    returnPipeRight3.iCom.fluidPointer = {returnPipeRight3.fluid[1].vleFluidPointer, returnPipeRight3.fluid[2].vleFluidPointer, returnPipeRight3.fluid[3].vleFluidPointer}
    returnPipeRight3.iCom.fluidPointer_out = {returnPipeRight3.fluidOutlet.vleFluidPointer}
    returnPipeRight3.iCom.fluidPointer_in = {returnPipeRight3.fluidInlet.vleFluidPointer}
    returnPipeRight2.iCom.fluidPointer = {returnPipeRight2.fluid[1].vleFluidPointer, returnPipeRight2.fluid[2].vleFluidPointer, returnPipeRight2.fluid[3].vleFluidPointer}
    returnPipeRight2.iCom.fluidPointer_out = {returnPipeRight2.fluidOutlet.vleFluidPointer}
    returnPipeRight2.iCom.fluidPointer_in = {returnPipeRight2.fluidInlet.vleFluidPointer}
    returnPipeRight1.iCom.fluidPointer = {returnPipeRight1.fluid[1].vleFluidPointer, returnPipeRight1.fluid[2].vleFluidPointer, returnPipeRight1.fluid[3].vleFluidPointer}
    returnPipeRight1.iCom.fluidPointer_out = {returnPipeRight1.fluidOutlet.vleFluidPointer}
    returnPipeRight1.iCom.fluidPointer_in = {returnPipeRight1.fluidInlet.vleFluidPointer}
    supplyPipeRight2.iCom.fluidPointer = {supplyPipeRight2.fluid[1].vleFluidPointer, supplyPipeRight2.fluid[2].vleFluidPointer, supplyPipeRight2.fluid[3].vleFluidPointer}
    supplyPipeRight2.iCom.fluidPointer_out = {supplyPipeRight2.fluidOutlet.vleFluidPointer}
    supplyPipeRight2.iCom.fluidPointer_in = {supplyPipeRight2.fluidInlet.vleFluidPointer}
    supplyPipeRight1.iCom.fluidPointer = {supplyPipeRight1.fluid[1].vleFluidPointer, supplyPipeRight1.fluid[2].vleFluidPointer, supplyPipeRight1.fluid[3].vleFluidPointer}
    supplyPipeRight1.iCom.fluidPointer_out = {supplyPipeRight1.fluidOutlet.vleFluidPointer}
    supplyPipeRight1.iCom.fluidPointer_in = {supplyPipeRight1.fluidInlet.vleFluidPointer}
    returnPipeLeft3.iCom.fluidPointer = {returnPipeLeft3.fluid[1].vleFluidPointer, returnPipeLeft3.fluid[2].vleFluidPointer, returnPipeLeft3.fluid[3].vleFluidPointer}
    returnPipeLeft3.iCom.fluidPointer_out = {returnPipeLeft3.fluidOutlet.vleFluidPointer}
    returnPipeLeft3.iCom.fluidPointer_in = {returnPipeLeft3.fluidInlet.vleFluidPointer}
    returnPipeLeft2.iCom.fluidPointer = {returnPipeLeft2.fluid[1].vleFluidPointer, returnPipeLeft2.fluid[2].vleFluidPointer, returnPipeLeft2.fluid[3].vleFluidPointer}
    returnPipeLeft2.iCom.fluidPointer_out = {returnPipeLeft2.fluidOutlet.vleFluidPointer}
    returnPipeLeft2.iCom.fluidPointer_in = {returnPipeLeft2.fluidInlet.vleFluidPointer}
    returnPipeLeft1.iCom.fluidPointer = {returnPipeLeft1.fluid[1].vleFluidPointer, returnPipeLeft1.fluid[2].vleFluidPointer, returnPipeLeft1.fluid[3].vleFluidPointer}
    returnPipeLeft1.iCom.fluidPointer_out = {returnPipeLeft1.fluidOutlet.vleFluidPointer}
    returnPipeLeft1.iCom.fluidPointer_in = {returnPipeLeft1.fluidInlet.vleFluidPointer}
    supplyPipeLeft2.iCom.fluidPointer = {supplyPipeLeft2.fluid[1].vleFluidPointer, supplyPipeLeft2.fluid[2].vleFluidPointer, supplyPipeLeft2.fluid[3].vleFluidPointer}
    supplyPipeLeft2.iCom.fluidPointer_out = {supplyPipeLeft2.fluidOutlet.vleFluidPointer}
    supplyPipeLeft2.iCom.fluidPointer_in = {supplyPipeLeft2.fluidInlet.vleFluidPointer}
    supplyPipeLeft1.iCom.fluidPointer = {supplyPipeLeft1.fluid[1].vleFluidPointer, supplyPipeLeft1.fluid[2].vleFluidPointer, supplyPipeLeft1.fluid[3].vleFluidPointer}
    supplyPipeLeft1.iCom.fluidPointer_out = {supplyPipeLeft1.fluidOutlet.vleFluidPointer}
    supplyPipeLeft1.iCom.fluidPointer_in = {supplyPipeLeft1.fluidInlet.vleFluidPointer}
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 8029
 * Number of variables: 8029
Notification: Performance of Generate backend data structure: time 0.1338/2.543, allocations: 54.05 MB / 3.624 GB, free: 15.64 MB / 1.608 GB
Notification: Performance of prepare preOptimizeDAE: time 4.451e-05/2.543, allocations: 12.03 kB / 3.624 GB, free: 15.63 MB / 1.608 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01971/2.563, allocations: 5.452 MB / 3.629 GB, free: 10.11 MB / 1.608 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.07186/2.634, allocations: 33.76 MB / 3.662 GB, free: 8.891 MB / 1.639 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.002405/2.637, allocations: 1.773 MB / 3.664 GB, free: 7.121 MB / 1.639 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.00821/2.645, allocations: 2.167 MB / 3.666 GB, free: 4.988 MB / 1.639 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.085/2.73, allocations: 40.37 MB / 3.705 GB, free: 7.582 MB / 1.686 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0008878/2.731, allocations: 233.8 kB / 3.705 GB, free: 7.352 MB / 1.686 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.006987/2.738, allocations: 1.041 MB / 3.706 GB, free: 6.344 MB / 1.686 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.001988/2.74, allocations: 1.501 MB / 3.708 GB, free: 4.84 MB / 1.686 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.06698/2.807, allocations: 28.85 MB / 3.736 GB, free: 7.953 MB / 1.717 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.2888/3.096, allocations: 220.4 MB / 3.951 GB, free: 5.355 MB / 1.936 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.05426/3.15, allocations: 30.45 MB / 3.981 GB, free: 5.539 MB / 1.967 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.02932/3.18, allocations: 15.38 MB / 3.996 GB, free: 5.715 MB / 1.983 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.004086/3.184, allocations: 0.9155 MB / 3.997 GB, free: 4.938 MB / 1.983 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.03777/3.222, allocations: 19.92 MB / 4.016 GB, free: 332 kB / 1.999 GB
Notification: Performance of preOpt simplifyInStream (simulation): time 0.7122/3.934, allocations: 8.956 MB / 4.025 GB, free: 0.6659 GB / 1.999 GB
Notification: Performance of pre-optimization done (n=4118): time 0.0001548/3.934, allocations: 1.594 kB / 4.025 GB, free: 0.6659 GB / 1.999 GB
Notification: Performance of matching and sorting (n=4127): time 2.156/6.09, allocations: 0.8918 GB / 4.917 GB, free: 0.5366 GB / 1.999 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.002385/6.092, allocations: 6.897 MB / 4.924 GB, free: 0.529 GB / 1.999 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.07726/6.17, allocations: 43.89 MB / 4.966 GB, free: 0.515 GB / 1.999 GB
Notification: Performance of collectPreVariables (initialization): time 0.004255/6.174, allocations: 404 kB / 4.967 GB, free: 0.5147 GB / 1.999 GB
Notification: Performance of collectInitialEqns (initialization): time 0.01619/6.19, allocations: 18.54 MB / 4.985 GB, free: 0.5003 GB / 1.999 GB
Notification: Performance of collectInitialBindings (initialization): time 0.01207/6.202, allocations: 13.57 MB / 4.998 GB, free: 0.49 GB / 1.999 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.01125/6.214, allocations: 6.695 MB / 5.005 GB, free: 498.9 MB / 1.999 GB
Notification: Performance of setup shared object (initialization): time 3.12e-05/6.214, allocations: 305.1 kB / 5.005 GB, free: 498.6 MB / 1.999 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.02402/6.238, allocations: 15.03 MB / 5.02 GB, free: 492.8 MB / 1.999 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.04589/6.284, allocations: 24.38 MB / 5.043 GB, free: 466.7 MB / 1.999 GB
Notification: Performance of analyzeInitialSystem (initialization): time 0.3414/6.625, allocations: 101.9 MB / 5.143 GB, free: 362.7 MB / 1.999 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0003817/6.625, allocations: 100 kB / 5.143 GB, free: 362.6 MB / 1.999 GB
Notification: Performance of matching and sorting (n=5706) (initialization): time 0.1032/6.729, allocations: 45.9 MB / 5.188 GB, free: 316.4 MB / 1.999 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0005788/6.729, allocations: 270.8 kB / 5.188 GB, free: 316.1 MB / 1.999 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.002973/6.732, allocations: 1.202 MB / 5.189 GB, free: 314.9 MB / 1.999 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.0154/6.748, allocations: 4.576 MB / 5.194 GB, free: 310.2 MB / 1.999 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02045/6.768, allocations: 5.666 MB / 5.199 GB, free: 304.6 MB / 1.999 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.04233/6.81, allocations: 61.93 MB / 5.26 GB, free: 238.1 MB / 1.999 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.02779/6.838, allocations: 1.412 MB / 5.261 GB, free: 236.7 MB / 1.999 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.005991/6.844, allocations: 1.593 MB / 5.263 GB, free: 235.1 MB / 1.999 GB
Warning: Assuming fixed start value for the following 74 variables:
         heatingLoadCharline_1.Q_dem:VARIABLE(unit = "J" fixed = true )  type: Real
         heatingLoadCharline_2.Q_dem:VARIABLE(unit = "J" fixed = true )  type: Real
         $STATESET1.x:VARIABLE(start = /*Real*/($STATESET1.A[1]) * $START.HeatConsumer.p + /*Real*/($STATESET1.A[2]) * $START.HeatConsumer.h fixed = true )  type: Real
         HeatingCondenserLeft.h:VARIABLE(start = HeatingCondenserLeft.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         HeatingCondenserLeft.p:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         supplyPipeLeft1.h[1]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft1.h[2]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft1.h[3]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft1.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft1.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft2.h[1]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft2.h[2]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft2.h[3]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft2.p[1]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft2.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft2.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft1.h[1]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft1.h[2]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft1.h[3]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft1.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft1.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft2.h[1]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft2.h[2]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft2.h[3]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft2.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft2.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft2.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft3.h[1]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft3.h[2]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft3.h[3]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft3.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft3.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft3.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         HeatingCondenserRight.h:VARIABLE(start = HeatingCondenserRight.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         HeatingCondenserRight.p:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         supplyPipeRight1.h[1]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight1.h[2]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight1.h[3]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight1.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight1.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight2.h[1]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight2.h[2]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight2.h[3]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight2.p[1]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight2.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight2.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight1.h[1]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight1.h[2]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight1.h[3]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight1.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight1.p[2]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight1.p[3]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight2.h[1]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight2.h[2]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight2.h[3]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight2.p[1]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight2.p[2]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight2.p[3]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight3.h[1]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight3.h[2]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight3.h[3]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight3.p[1]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight3.p[2]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight3.p[3]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         PID11.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID10.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID7.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID6.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID5.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID4.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID3.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID2.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.04962/6.894, allocations: 24.35 MB / 5.287 GB, free: 210.9 MB / 1.999 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.0306/6.925, allocations: 23.91 MB / 5.31 GB, free: 182.1 MB / 1.999 GB
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.3487/7.273, allocations: 100.5 MB / 5.408 GB, free: 76.74 MB / 1.999 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0002617/7.274, allocations: 103.9 kB / 5.408 GB, free: 76.64 MB / 1.999 GB
Notification: Performance of matching and sorting (n=5706) (initialization_lambda0): time 0.09311/7.367, allocations: 44.31 MB / 5.452 GB, free: 32.07 MB / 1.999 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0004929/7.367, allocations: 270.8 kB / 5.452 GB, free: 31.78 MB / 1.999 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.002774/7.37, allocations: 1.206 MB / 5.453 GB, free: 30.57 MB / 1.999 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01487/7.385, allocations: 4.281 MB / 5.457 GB, free: 26.17 MB / 1.999 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02001/7.405, allocations: 5.6 MB / 5.463 GB, free: 20.56 MB / 1.999 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.7746/8.18, allocations: 59.73 MB / 5.521 GB, free: 0.5508 GB / 1.999 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.02759/8.207, allocations: 1.337 MB / 5.522 GB, free: 0.5508 GB / 1.999 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.006499/8.214, allocations: 1.557 MB / 5.524 GB, free: 0.5508 GB / 1.999 GB
Warning: Assuming fixed start value for the following 74 variables:
         heatingLoadCharline_1.Q_dem:VARIABLE(unit = "J" fixed = true )  type: Real
         heatingLoadCharline_2.Q_dem:VARIABLE(unit = "J" fixed = true )  type: Real
         $STATESET1.x:VARIABLE(start = /*Real*/($STATESET1.A[1]) * $START.HeatConsumer.p + /*Real*/($STATESET1.A[2]) * $START.HeatConsumer.h fixed = true )  type: Real
         HeatingCondenserLeft.h:VARIABLE(start = HeatingCondenserLeft.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         HeatingCondenserLeft.p:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         supplyPipeLeft1.h[1]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft1.h[2]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft1.h[3]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft1.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft1.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft2.h[1]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft2.h[2]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft2.h[3]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeLeft2.p[1]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft2.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeLeft2.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft1.h[1]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft1.h[2]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft1.h[3]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft1.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft1.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft2.h[1]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft2.h[2]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft2.h[3]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft2.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft2.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft2.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft3.h[1]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft3.h[2]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft3.h[3]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeLeft3.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft3.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeLeft3.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         HeatingCondenserRight.h:VARIABLE(start = HeatingCondenserRight.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         HeatingCondenserRight.p:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         supplyPipeRight1.h[1]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight1.h[2]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight1.h[3]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight1.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight1.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight2.h[1]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight2.h[2]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight2.h[3]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         supplyPipeRight2.p[1]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight2.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         supplyPipeRight2.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight1.h[1]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight1.h[2]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight1.h[3]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight1.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight1.p[2]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight1.p[3]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight2.h[1]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight2.h[2]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight2.h[3]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight2.p[1]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight2.p[2]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight2.p[3]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight3.h[1]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight3.h[2]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight3.h[3]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true )  "Cell enthalpy" type: Real [3]
         returnPipeRight3.p[1]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight3.p[2]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         returnPipeRight3.p[3]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[3] unit = "Pa" fixed = true nominal = 1e5 protected = true )  "Cell pressure" type: Real [3]
         PID11.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID10.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID7.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID6.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID5.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID4.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID3.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID2.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         PID.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 1567
 * Number of states: 0 ()
 * Number of discrete variables: 145 ($PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$whenCondition33,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,$whenCondition32,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,$whenCondition15,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,$whenCondition14,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,$whenCondition9,$PRE.heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,$whenCondition8,$PRE.heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,$whenCondition6,$PRE.heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,$whenCondition5,$PRE.heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,$whenCondition3,heatingLoadCharline_1.hour_of_day.count,$PRE.heatingLoadCharline_1.hour_of_day.count,heatingLoadCharline_1.hour_of_day.T_start,$PRE.heatingLoadCharline_1.hour_of_day.T_start,$whenCondition2,heatingLoadCharline_2.hour_of_day.count,$PRE.heatingLoadCharline_2.hour_of_day.count,heatingLoadCharline_2.hour_of_day.T_start,$PRE.heatingLoadCharline_2.hour_of_day.T_start,$whenCondition1,$PRE.heatingLoadCharline_2.weekendPulse.pulse.count,$PRE.heatingLoadCharline_2.weekendPulse.pulse.T_start,$PRE.heatingLoadCharline_1.weekendPulse.pulse.count,$PRE.heatingLoadCharline_1.weekendPulse.pulse.T_start,$PRE.PID11.time_lag_I_activation.entryTime,$PRE.PID11.switch_OnOff.u2,$PRE.PID10.time_lag_I_activation.entryTime,$PRE.PID10.switch_OnOff.u2,$PRE.PID7.time_lag_I_activation.entryTime,$PRE.PID7.switch_OnOff.u2,$PRE.PID6.time_lag_I_activation.entryTime,$PRE.PID6.switch_OnOff.u2,$PRE.PID5.time_lag_I_activation.entryTime,$PRE.PID5.switch_OnOff.u2,$PRE.PID4.time_lag_I_activation.entryTime,$PRE.PID4.switch_OnOff.u2,$PRE.PID3.time_lag_I_activation.entryTime,$PRE.PID3.switch_OnOff.u2,$PRE.PID2.time_lag_I_activation.entryTime,$PRE.PID2.switch_OnOff.u2,$PRE.PID1.time_lag_I_activation.entryTime,$PRE.PID1.switch_OnOff.u2,$PRE.PID.time_lag_I_activation.entryTime,$PRE.PID.switch_OnOff.u2,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.weekendPulse.pulse.count,heatingLoadCharline_2.weekendPulse.pulse.T_start,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.weekendPulse.pulse.count,heatingLoadCharline_1.weekendPulse.pulse.T_start,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,PID11.I_activation.y,PID11.time_lag_I_activation.entryTime,PID11.switch_OnOff.u2,PID10.I_activation.y,PID10.time_lag_I_activation.entryTime,PID10.switch_OnOff.u2,PID7.I_activation.y,PID7.time_lag_I_activation.entryTime,PID7.switch_OnOff.u2,PID6.I_activation.y,PID6.time_lag_I_activation.entryTime,PID6.switch_OnOff.u2,returnPipeRight3.heatTransfer.table_block.tableID,returnPipeRight2.heatTransfer.table_block.tableID,returnPipeRight1.heatTransfer.table_block.tableID,supplyPipeRight2.heatTransfer.table_block.tableID,supplyPipeRight1.heatTransfer.table_block.tableID,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,PID5.I_activation.y,PID5.time_lag_I_activation.entryTime,PID5.switch_OnOff.u2,PID4.I_activation.y,PID4.time_lag_I_activation.entryTime,PID4.switch_OnOff.u2,PID3.I_activation.y,PID3.time_lag_I_activation.entryTime,PID3.switch_OnOff.u2,PID2.I_activation.y,PID2.time_lag_I_activation.entryTime,PID2.switch_OnOff.u2,PID1.I_activation.y,PID1.time_lag_I_activation.entryTime,PID1.switch_OnOff.u2,PID.I_activation.y,PID.time_lag_I_activation.entryTime,PID.switch_OnOff.u2,returnPipeLeft3.heatTransfer.table_block.tableID,returnPipeLeft2.heatTransfer.table_block.tableID,returnPipeLeft1.heatTransfer.table_block.tableID,supplyPipeLeft2.heatTransfer.table_block.tableID,supplyPipeLeft1.heatTransfer.table_block.tableID,$whenCondition4,$whenCondition7,$whenCondition10,$whenCondition11,$whenCondition12,$whenCondition13,$whenCondition16,$whenCondition17,$whenCondition18,$whenCondition19,$whenCondition20,$whenCondition21,$whenCondition22,$whenCondition23,$whenCondition24,$whenCondition25,$whenCondition26,$whenCondition27,$whenCondition28,$whenCondition29,$whenCondition30,$whenCondition31)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (3376):
 * Single equations (assignments): 2986
 * Array equations: 0
 * Algorithm blocks: 4
 * Record equations: 344
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 2
 * Torn equation systems: 40
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 1 system
   {(2,100.0%)}
 * Non-linear Jacobian (size): 1 system
   {2}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 28 systems
   {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%), (1,3,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 12 systems
   {(2,6), (2,6), (1,7), (1,18), (2,19), (2,7), (1,16), (1,16), (1,7), (1,18), (1,16), (1,16)}
Notification: Performance of prepare postOptimizeDAE: time 0.01161/8.225, allocations: 2.638 MB / 5.526 GB, free: 0.5505 GB / 1.999 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01551/8.241, allocations: 4.04 MB / 5.53 GB, free: 0.5505 GB / 1.999 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.09972/8.341, allocations: 37.4 MB / 5.567 GB, free: 0.543 GB / 1.999 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.0007262/8.341, allocations: 339.7 kB / 5.567 GB, free: 0.543 GB / 1.999 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001793/8.342, allocations: 53.97 kB / 5.567 GB, free: 0.543 GB / 1.999 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.06311/8.405, allocations: 27.64 MB / 5.594 GB, free: 0.5332 GB / 1.999 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1568/8.562, allocations: 75.82 MB / 5.668 GB, free: 0.5 GB / 1.999 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.002313/8.564, allocations: 0.9049 MB / 5.669 GB, free: 0.4998 GB / 1.999 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01316/8.577, allocations: 2.814 MB / 5.672 GB, free: 0.4991 GB / 1.999 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.01675/8.594, allocations: 4.787 MB / 5.677 GB, free: 0.4966 GB / 1.999 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.004766/8.599, allocations: 0.7636 MB / 5.677 GB, free: 0.4962 GB / 1.999 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.0383/8.637, allocations: 60.4 MB / 5.736 GB, free: 451.3 MB / 1.999 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 0.001195/8.638, allocations: 1.72 MB / 5.738 GB, free: 449.7 MB / 1.999 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1159/8.754, allocations: 54.29 MB / 5.791 GB, free: 404.6 MB / 1.999 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.02612/8.78, allocations: 8.499 MB / 5.799 GB, free: 396.8 MB / 1.999 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01556/8.796, allocations: 487.8 kB / 5.8 GB, free: 396.3 MB / 1.999 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.02243/8.818, allocations: 0.8351 MB / 5.801 GB, free: 395.5 MB / 1.999 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.006555/8.825, allocations: 1.769 MB / 5.802 GB, free: 393.7 MB / 1.999 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.00471/8.83, allocations: 0.8511 MB / 5.803 GB, free: 392.8 MB / 1.999 GB
Notification: Performance of sorting global known variables: time 0.0539/8.884, allocations: 30.4 MB / 5.833 GB, free: 362.6 MB / 1.999 GB
Notification: Performance of sort global known variables: time 2.5e-07/8.884, allocations: 4 kB / 5.833 GB, free: 362.6 MB / 1.999 GB
Notification: Performance of remove unused functions: time 0.06172/8.945, allocations: 13.59 MB / 5.846 GB, free: 349.1 MB / 1.999 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 166
 * Number of states: 134 (PID.smoothPIDInput.y_aux,PID.smoothPIDOutput.y_aux,PID.smoothPIDOutput1.y_aux,PID.resetValueI,PID1.smoothPIDInput.y_aux,PID1.smoothPIDOutput.y_aux,PID1.smoothPIDOutput1.y_aux,PID1.resetValueI,PID2.smoothPIDInput.y_aux,PID2.smoothPIDOutput.y_aux,PID2.smoothPIDOutput1.y_aux,PID2.resetValueI,PID3.smoothPIDInput.y_aux,PID3.smoothPIDOutput.y_aux,PID3.smoothPIDOutput1.y_aux,PID3.resetValueI,PID4.smoothPIDInput.y_aux,PID4.smoothPIDOutput.y_aux,PID4.smoothPIDOutput1.y_aux,PID4.resetValueI,PID5.smoothPIDInput.y_aux,PID5.smoothPIDOutput.y_aux,PID5.smoothPIDOutput1.y_aux,PID5.resetValueI,PID6.smoothPIDInput.y_aux,PID6.smoothPIDOutput.y_aux,PID6.smoothPIDOutput1.y_aux,PID6.resetValueI,PID7.smoothPIDInput.y_aux,PID7.smoothPIDOutput.y_aux,PID7.smoothPIDOutput1.y_aux,PID7.resetValueI,PID10.smoothPIDInput.y_aux,PID10.smoothPIDOutput.y_aux,PID10.smoothPIDOutput1.y_aux,PID10.resetValueI,PID11.smoothPIDInput.y_aux,PID11.smoothPIDOutput.y_aux,PID11.smoothPIDOutput1.y_aux,PID11.resetValueI,$STATESET1.x,HeatingCondenserLeft.h,HeatingCondenserLeft.p,supplyPipeLeft1.h[1],supplyPipeLeft1.h[2],supplyPipeLeft1.h[3],supplyPipeLeft1.p[2],supplyPipeLeft1.p[3],supplyPipeLeft2.h[1],supplyPipeLeft2.h[2],supplyPipeLeft2.h[3],supplyPipeLeft2.p[1],supplyPipeLeft2.p[2],supplyPipeLeft2.p[3],returnPipeLeft1.h[1],returnPipeLeft1.h[2],returnPipeLeft1.h[3],returnPipeLeft1.p[2],returnPipeLeft1.p[3],returnPipeLeft2.h[1],returnPipeLeft2.h[2],returnPipeLeft2.h[3],returnPipeLeft2.p[1],returnPipeLeft2.p[2],returnPipeLeft2.p[3],returnPipeLeft3.h[1],returnPipeLeft3.h[2],returnPipeLeft3.h[3],returnPipeLeft3.p[1],returnPipeLeft3.p[2],returnPipeLeft3.p[3],PID.resetValueP,PID.resetValueID,PID.I.y,PID1.resetValueP,PID1.resetValueID,PID1.I.y,PID2.resetValueP,PID2.resetValueID,PID2.I.y,PID3.resetValueP,PID3.resetValueID,PID3.I.y,PID4.resetValueP,PID4.resetValueID,PID4.I.y,PID5.resetValueP,PID5.resetValueID,PID5.I.y,HeatingCondenserRight.h,HeatingCondenserRight.p,supplyPipeRight1.h[1],supplyPipeRight1.h[2],supplyPipeRight1.h[3],supplyPipeRight1.p[2],supplyPipeRight1.p[3],supplyPipeRight2.h[1],supplyPipeRight2.h[2],supplyPipeRight2.h[3],supplyPipeRight2.p[1],supplyPipeRight2.p[2],supplyPipeRight2.p[3],returnPipeRight1.h[1],returnPipeRight1.h[2],returnPipeRight1.h[3],returnPipeRight1.p[1],returnPipeRight1.p[2],returnPipeRight1.p[3],returnPipeRight2.h[1],returnPipeRight2.h[2],returnPipeRight2.h[3],returnPipeRight2.p[1],returnPipeRight2.p[2],returnPipeRight2.p[3],returnPipeRight3.h[1],returnPipeRight3.h[2],returnPipeRight3.h[3],returnPipeRight3.p[1],returnPipeRight3.p[2],returnPipeRight3.p[3],PID6.resetValueP,PID6.resetValueID,PID6.I.y,PID7.resetValueP,PID7.resetValueID,PID7.I.y,PID10.resetValueP,PID10.resetValueID,PID10.I.y,PID11.resetValueP,PID11.resetValueID,PID11.I.y,heatingLoadCharline_1.Q_dem,heatingLoadCharline_2.Q_dem)
 * Number of discrete variables: 99 ($whenCondition1,heatingLoadCharline_2.hour_of_day.T_start,heatingLoadCharline_2.hour_of_day.count,$whenCondition2,heatingLoadCharline_1.hour_of_day.T_start,heatingLoadCharline_1.hour_of_day.count,$whenCondition31,$whenCondition30,$whenCondition29,$whenCondition28,$whenCondition27,$whenCondition26,$whenCondition25,$whenCondition24,$whenCondition23,$whenCondition22,$whenCondition21,$whenCondition20,$whenCondition19,$whenCondition18,$whenCondition17,$whenCondition16,$whenCondition15,$whenCondition14,$whenCondition13,$whenCondition12,$whenCondition11,$whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,supplyPipeLeft1.heatTransfer.table_block.tableID,supplyPipeLeft2.heatTransfer.table_block.tableID,returnPipeLeft1.heatTransfer.table_block.tableID,returnPipeLeft2.heatTransfer.table_block.tableID,returnPipeLeft3.heatTransfer.table_block.tableID,PID.switch_OnOff.u2,PID.time_lag_I_activation.entryTime,PID.I_activation.y,PID1.switch_OnOff.u2,PID1.time_lag_I_activation.entryTime,PID1.I_activation.y,PID2.switch_OnOff.u2,PID2.time_lag_I_activation.entryTime,PID2.I_activation.y,PID3.switch_OnOff.u2,PID3.time_lag_I_activation.entryTime,PID3.I_activation.y,PID4.switch_OnOff.u2,PID4.time_lag_I_activation.entryTime,PID4.I_activation.y,PID5.switch_OnOff.u2,PID5.time_lag_I_activation.entryTime,PID5.I_activation.y,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,supplyPipeRight1.heatTransfer.table_block.tableID,supplyPipeRight2.heatTransfer.table_block.tableID,returnPipeRight1.heatTransfer.table_block.tableID,returnPipeRight2.heatTransfer.table_block.tableID,returnPipeRight3.heatTransfer.table_block.tableID,PID6.switch_OnOff.u2,PID6.time_lag_I_activation.entryTime,PID6.I_activation.y,PID7.switch_OnOff.u2,PID7.time_lag_I_activation.entryTime,PID7.I_activation.y,PID10.switch_OnOff.u2,PID10.time_lag_I_activation.entryTime,PID10.I_activation.y,PID11.switch_OnOff.u2,PID11.time_lag_I_activation.entryTime,PID11.I_activation.y,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.weekendPulse.pulse.T_start,heatingLoadCharline_1.weekendPulse.pulse.count,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.weekendPulse.pulse.T_start,heatingLoadCharline_2.weekendPulse.pulse.count,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,$whenCondition32,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,$whenCondition33,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled)
 * Number of discrete states: 42 (simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.weekendPulse.pulse.count,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.weekendPulse.pulse.count,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,PID11.switch_OnOff.u2,PID10.switch_OnOff.u2,PID7.switch_OnOff.u2,PID6.switch_OnOff.u2,PID5.switch_OnOff.u2,PID4.switch_OnOff.u2,PID3.switch_OnOff.u2,PID2.switch_OnOff.u2,PID1.switch_OnOff.u2,PID.switch_OnOff.u2,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,PID11.toPU.y,PID10.toPU.y,PID7.toPU.y,PID6.toPU.y,PID5.toPU.y,PID4.toPU.y,PID3.toPU.y,PID2.toPU.y,PID1.toPU.y,PID.toPU.y,heatingLoadCharline_1.hour_of_day.count,heatingLoadCharline_2.hour_of_day.count)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (1851):
 * Single equations (assignments): 1419
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 344
 * When equations: 46
 * If-equations: 0
 * Equation systems (not torn): 2
 * Torn equation systems: 40
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 1 system
   {(2,100.0%)}
 * Non-linear Jacobian (size): 1 system
   {2}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 28 systems
   {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 12 systems
   {(2,20), (2,9), (2,6), (2,6), (1,17), (1,17), (1,20), (1,8), (1,17), (1,17), (1,20), (1,8)}
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of:
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /usr/lib//libTILMedia181ClaRa.a
  /lib//libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /usr/lib//libTILMedia181ClaRa.so
  /lib//libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of:
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /usr/lib//libTILMedia181ClaRa.a
  /lib//libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /usr/lib//libTILMedia181ClaRa.so
  /lib//libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of:
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /usr/lib//libTILMedia181ClaRa.a
  /lib//libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /usr/lib//libTILMedia181ClaRa.so
  /lib//libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of:
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /usr/lib//libTILMedia181ClaRa.a
  /lib//libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /usr/lib//libTILMedia181ClaRa.so
  /lib//libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of:
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /usr/lib//libTILMedia181ClaRa.a
  /lib//libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /usr/lib//libTILMedia181ClaRa.so
  /lib//libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of:
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a
  /usr/lib//libTILMedia181ClaRa.a
  /lib//libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so
  /usr/lib//libTILMedia181ClaRa.so
  /lib//libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so
  /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so
  /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so
Notification: Performance of Backend phase and start with SimCode phase: time 0.009377/8.955, allocations: 2.958 MB / 5.849 GB, free: 347.1 MB / 1.999 GB
Notification: Performance of simCode: created initialization part: time 0.1145/9.069, allocations: 82.71 MB / 5.93 GB, free: 259.4 MB / 1.999 GB
Notification: Performance of simCode: created event and clocks part: time 3.208e-05/9.069, allocations: 9 kB / 5.93 GB, free: 259.4 MB / 1.999 GB
Notification: Performance of simCode: created simulation system equations: time 0.05369/9.123, allocations: 39.4 MB / 5.968 GB, free: 217.4 MB / 1.999 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.04784/9.171, allocations: 7.923 MB / 5.976 GB, free: 209.6 MB / 1.999 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.1495/9.32, allocations: 87.32 MB / 6.061 GB, free: 121.8 MB / 1.999 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.03233/9.353, allocations: 20.92 MB / 6.082 GB, free: 100.8 MB / 1.999 GB
Notification: Performance of simCode: alias equations: time 0.03607/9.389, allocations: 12.67 MB / 6.094 GB, free: 88.41 MB / 1.999 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01158/9.4, allocations: 3.113 MB / 6.097 GB, free: 85.3 MB / 1.999 GB
Notification: Performance of SimCode: time 1.032e-06/9.401, allocations: 0 / 6.097 GB, free: 85.3 MB / 1.999 GB
Notification: Performance of Templates: time 1.566/10.97, allocations: 0.5216 GB / 6.619 GB, free: 342 MB / 2.045 GB
make -j1 -f TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.makefile
(rm -f TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe ; mkfifo TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe >> ../files/TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.sim & ./TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled  -abortSlowSimulation -alarm=480 -s gbode -lv LOG_STATS > TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe 2>&1)