Environment - simulationEnvironment:
startTime=0
stopTime=3600
tolerance=1e-06
numberOfIntervals=2500
stepSize=1.44
Regular simulation: ./Buildings_latest_Buildings.Experimental.DHC.Networks.Examples.Distribution2PipeExample  -abortSlowSimulation -alarm=480 -s cvode -lv LOG_STATS
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Resources/Data/Experimental/DHC/Loads/Examples/SwissResidential_20190916.mos"
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[1].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[1].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[2].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[2].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[3].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[3].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[4].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[4].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[5].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terAutoSize[5].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pumAutoSize.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumAutoSize.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in Distribution2PipeExample.pumAutoSize: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pumAutoSize.per.haveWMot_nominal or not (pumAutoSize.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumAutoSize.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in Distribution2PipeExample.pumAutoSize: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[1].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[1].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[2].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[2].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[3].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[3].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[4].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[4].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[5].fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in Distribution2PipeExample.terPlugFlow[5].fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pumPlugFlow.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumPlugFlow.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in Distribution2PipeExample.pumPlugFlow: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pumPlugFlow.per.haveWMot_nominal or not (pumPlugFlow.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumPlugFlow.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in Distribution2PipeExample.pumPlugFlow: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_ASSERT        | debug   | New front position is not smaller then previous first node.
LOG_STDOUT        | error   | x got reinitialized during an event at time 56.160000. OpenModelica can't handle that.