Environment - simulationEnvironment: startTime=0 stopTime=604800 tolerance=1e-06 numberOfIntervals=2500 stepSize=241.92 Regular simulation: ./Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone -abortSlowSimulation -alarm=480 -s cvode -emit_protected -lv LOG_STATS LOG_STDOUT | warning | The default linear solver fails, the fallback solver with total pivoting is started at time 0.000000. That might raise performance issues, for more information use -lv LOG_LS. LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable] | | | | The following assertion has been violated during initialization at time 0.000000 | | | | ((not (fan[1].per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or fan[1].per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in OneFloor_OneZone.fan[1]: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber. | | | | This requires per.pressure to be provided. | | | | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided. | | | | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve." LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable] | | | | The following assertion has been violated during initialization at time 0.000000 | | | | ((fan[1].per.haveWMot_nominal or not (fan[1].per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or fan[1].per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in OneFloor_OneZone.fan[1]: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve. | | | | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided, | | | | the model overrides this setting and by using per.etaMotMet=.NotProvided. | | | | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve." LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/HeatExchangers/WetCoilEffectivenessNTU.mo:71:3-76:35:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((cooCoi[1].SHR >= 0.0 and cooCoi[1].SHR <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= cooCoi[1].SHR <= 1.0, has value: -2.33981e-30" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:99:3-99:89:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((fanRet[1].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= fanRet[1].etaHyd, has value: -5.51431e-23" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PowerInterface.mo:46:3-47:27:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((fanRet[1].heaDis.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= fanRet[1].heaDis.etaHyd, has value: -5.13599e-20" LOG_SUCCESS | info | The initialization finished successfully with 3 homotopy steps. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Blocks/Interfaces.mo:329:5-330:56:writable] | | | | The following assertion has been violated at time 725.760000 | | | | ((eco[1].filter.y >= 0.0 and eco[1].filter.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= eco[1].filter.y <= 1.0, has value: -2.38576e-15" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Blocks/Interfaces.mo:346:5-347:56:writable] | | | | The following assertion has been violated at time 725.760000 | | | | ((eco[1].add.y >= 0.0 and eco[1].add.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= eco[1].add.y <= 1.0, has value: 1" LOG_ASSERT | warning | The following assertion has been violated at time 9676.800000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -860.35 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9676.800000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -860.35 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9676.800000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -860.35 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9676.800000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -860.35 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 9676.8. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.684154)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.684154)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.684154)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.684154)^(-1.5) LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 9676.8. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-117.378)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-75.992)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-48.8841)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-31.1284)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-19.4985)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-11.8808)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-6.89128)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.62313)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.48249)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.0803668)^(-1.5) LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -4.95794e+103 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -3.24745e+103 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.12708e+103 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.39324e+103 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -9.12571e+102 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -5.97734e+102 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -3.91516e+102 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.56443e+102 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.6797e+102 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.1002e+102 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -7.20633e+101 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -4.72015e+101 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -3.0917e+101 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.02506e+101 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.32642e+101 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -8.68802e+100 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -5.69065e+100 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -3.72738e+100 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.44143e+100 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.59914e+100 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.04744e+100 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -6.8607e+99 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -4.49376e+99 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 9918.720000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -348376 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 9918.72. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-38.4271)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-23.8129)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-14.2405)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-7.97067)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.86389)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.17396)^(-1.5) LOG_ASSERT | warning | The following assertion has been violated at time 16571.520000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2103.93 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 16571.520000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2103.93 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 16571.520000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2103.93 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 16571.520000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2103.93 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 16571.5. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.50372)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.50372)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.50372)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.50372)^(-1.5) LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 16571.5. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 16511.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -911.338 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 16511.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -911.338 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 16511.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -911.338 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 16511.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -911.338 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 16511. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.735912)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.735912)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.735912)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.735912)^(-1.5) LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 16511. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 21047.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -387.795 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 21047.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -387.795 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 21047.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -387.795 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 21047.040000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -387.795 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 21047. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 20986.560000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -53.2645 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 20986.560000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -53.2645 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 20986.560000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -53.2645 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 20986.560000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -53.2645 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 20986.6. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable] | | | | The following assertion has been violated at time 23103.360000 | | | | ((fanRet[1].eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= fanRet[1].eff.yMot, has value: -2.09558e-38" LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-256.949)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-167.435)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-108.804)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-70.4003)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-45.246)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-28.7699)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-17.978)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-10.9094)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-6.2794)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.24677)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.2604)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-82.7629)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-53.2953)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-33.994)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-21.3517)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-13.0709)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-7.64704)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-4.0944)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.76742)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.243245)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-38.0838)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-23.5475)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-14.0263)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-7.78983)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.70497)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.02938)^(-1.5) LOG_ASSERT | warning | The following assertion has been violated at time 48021.120000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10728.7 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 48021.1. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 48504.960000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10781.1 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 48505. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 48625.920000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10921.5 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 48625.9. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 48746.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10876.6 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 48746.9. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 48867.840000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10553.8 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 48867.8. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 48988.800000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10647.8 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 48988.8. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-348.333)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-227.296)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-148.017)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-96.0897)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-62.0771)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-39.7988)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-25.2065)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-15.6486)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-9.3881)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-5.28751)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.60161)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.842357)^(-1.5) LOG_ASSERT | warning | The following assertion has been violated at time 58423.680000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -11011 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 58423.7. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 58544.640000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10826.3 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 58544.6. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 59270.400000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -11152.2 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 59270.4. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 59512.320000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10920.8 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 59512.3. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-343.96)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-224.432)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-146.141)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-94.8605)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-61.2718)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-39.2711)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-24.8607)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-15.4219)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-9.2395)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-5.19001)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.5376)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.800268)^(-1.5) LOG_ASSERT | warning | The following assertion has been violated at time 59875.200000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10828.2 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 59875.2. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | warning | The following assertion has been violated at time 60600.960000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -10781.8 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 60601. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-105.726)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-68.3545)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-43.8761)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-27.8427)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-17.3408)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-10.4621)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-5.95655)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.00541)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.07241)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-39.1313)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-24.3658)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-14.6943)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-8.35958)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-4.2103)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.49253)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-94.2794)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-60.8493)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-38.9525)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-24.6102)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-15.216)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-9.06273)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-5.03236)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-2.39247)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.663348)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-37.0449)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-21.8488)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-11.8953)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-5.37573)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.10543)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-37.5013)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-22.9506)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-13.4199)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-7.17726)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.08835)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-0.410118)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-38.1811)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-23.6152)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-14.0746)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-7.82544)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-3.73226)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1.05123)^(-1.5) LOG_ASSERT | warning | The following assertion has been violated at time 87816.960000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1386.59 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 87816.960000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1386.59 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 87816.960000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1386.59 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 87816.960000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1386.59 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 87817. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/PowerInterface.mo:46:3-47:27:writable] | | | | The following assertion has been violated at time 151320.960000 | | | | ((fan[1].heaDis.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= fan[1].heaDis.etaHyd, has value: -1.8378e-15" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.0-master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable] | | | | The following assertion has been violated at time 151320.960000 | | | | ((fan[1].eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= fan[1].eff.yMot, has value: -3.67561e-22" LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.91023e+10 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.2512e+10 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -8.19538e+09 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -5.36797e+09 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -3.51602e+09 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.30299e+09 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.50846e+09 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -9.88041e+08 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -6.47166e+08 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -4.23893e+08 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.77649e+08 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.81859e+08 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.19117e+08 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -7.80209e+07 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -5.11029e+07 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -3.34716e+07 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.19231e+07 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.43589e+07 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -9.40428e+06 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -6.15902e+06 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -4.03337e+06 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -2.64108e+06 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -1.72912e+06 should be > 0 LOG_ASSERT | warning | The following assertion has been violated at time 172730.880000 LOG_ASSERT | debug | Model error: Argument of log(cooCoi[1].dryWetCalcs.TAirInDewPoi) was -224563 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 172731. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-36.9747)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-19.0492)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-7.30796)^(-1.5) LOG_ASSERT | debug | Buildings_latest_Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone_functions.c:9056: Invalid root: (-1487.48)^(-1.5) LOG_STDOUT | info | ##CVODE## -8 error occurred at time = 196680.96 LOG_STDOUT | info | model terminate | Integrator failed. | Simulation terminated at time 196681 LOG_STATS | info | ### STATISTICS ### | | | | | timer | | | | | | 0.139794s reading init.xml | | | | | | 0.00992207s reading info.xml | | | | | | 0.00378419s [ 0.4%] pre-initialization | | | | | | 0.0332705s [ 3.4%] initialization | | | | | | 0.000163346s [ 0.0%] steps | | | | | | 0.0594593s [ 6.1%] solver (excl. callbacks) | | | | | | 0.00912297s [ 0.9%] creating output-file | | | | | | 0.00492681s [ 0.5%] event-handling | | | | | | 0.0158488s [ 1.6%] overhead | | | | | | 0.848737s [ 87.0%] simulation | | | | | | 0.975313s [100.0%] total | | | | | events | | | | | | 44 state events | | | | | | 0 time events | | | | | solver: cvode | | | | | | 6200 steps taken | | | | | | 8800 calls of functionODE | | | | | | 205 evaluations of jacobian | | | | | | 208 error test failures | | | | | | 25 convergence test failures | | | | | | 0s time of jacobian evaluation