Environment - simulationEnvironment:
startTime=0
stopTime=3.1536e+07
tolerance=1e-06
numberOfIntervals=2500
stepSize=12614.4
Regular simulation: ./BuildingSystems_BuildingSystems.Applications.SolarThermalSystems.SolarThermalSystem2  -abortSlowSimulation -alarm=480 -s cvode -lv LOG_STATS
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/weather/Egypt_ElGouna.txt"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-426:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pump1.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pump1.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in SolarThermalSystem2.pump1: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:428:3-437:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pump1.per.haveWMot_nominal or not (pump1.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pump1.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in SolarThermalSystem2.pump1: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-426:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pump2.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pump2.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in SolarThermalSystem2.pump2: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:428:3-437:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pump2.per.haveWMot_nominal or not (pump2.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pump2.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in SolarThermalSystem2.pump2: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided."
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26320.978383
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26320.978383
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26320.978383
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.216813
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.216813
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.216813
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.217573
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.217573
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.217573
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.387858
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.387858
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.387858
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28662.965224
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28662.965224
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28662.965224
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.006275
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.006275
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.006275
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.023682
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.023682
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.023682
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.051895
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.051895
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.051895
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30385.872716
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30385.872716
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30385.872716
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.345163
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.345163
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.345163
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.503779
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.503779
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.503779
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31488.920304
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31488.920304
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31488.920304
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31831.930756
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31831.930756
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31831.930756
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32164.805317
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32164.805317
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32164.805317
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32491.988786
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32491.988786
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32491.988786
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32693.977362
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32693.977362
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32693.977362
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.545904
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.545904
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.545904
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33057.972947
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33057.972947
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33057.972947
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33225.971715
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33225.971715
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33225.971715
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.421913
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.421913
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.421913
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33543.764830
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33543.764830
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33543.764830
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.182675
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.182675
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.182675
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33845.697942
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33845.697942
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33845.697942
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.355651
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.355651
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.355651
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.340772
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.340772
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.340772
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.453761
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.453761
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.453761
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.165993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.165993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.165993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 37843.200000
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | error   | No event found, but assert was triggered. Throwing now!