Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) [Timeout 90]
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001555/0.001555, allocations: 105.9 kB / 18.19 MB, free: 3.879 MB / 14.72 MB
[Timeout remaining time 90]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) [Timeout 90]
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001461/0.001461, allocations: 189.9 kB / 21.34 MB, free: 0.7383 MB / 14.72 MB
[Timeout remaining time 90]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false) [Timeout 90]
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.342/1.342, allocations: 225.6 MB / 249.9 MB, free: 13.45 MB / 206.1 MB
[Timeout remaining time 88]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false) [Timeout 90]
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.734/0.734, allocations: 94.58 MB / 399.6 MB, free: 15.55 MB / 318.1 MB
[Timeout remaining time 89]
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=1000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump")
translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=1000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump") [Timeout 660]
Notification: Performance of FrontEnd - loaded program: time 0.002306/0.002306, allocations: 85.25 kB / 0.5452 GB, free: 42.43 MB / 446.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.119/0.1213, allocations: 71.85 MB / 0.6154 GB, free: 8.789 MB / 462.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.HeatPump): time 0.7414/0.8627, allocations: 395.7 MB / 1.002 GB, free: 14.65 MB / 0.7481 GB
Notification: Performance of NFInst.instExpressions: time 0.7205/1.583, allocations: 234.1 MB / 1.23 GB, free: 11.36 MB / 0.795 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.005184/1.588, allocations: 127.2 kB / 1.231 GB, free: 11.29 MB / 0.795 GB
Notification: Performance of NFTyping.typeComponents: time 0.007031/1.595, allocations: 2.285 MB / 1.233 GB, free: 10.29 MB / 0.795 GB
Notification: Performance of NFTyping.typeBindings: time 0.02957/1.625, allocations: 9.073 MB / 1.242 GB, free: 5.707 MB / 0.795 GB
Notification: Performance of NFTyping.typeClassSections: time 0.06912/1.694, allocations: 21.73 MB / 1.263 GB, free: 4.77 MB / 0.8106 GB
Notification: Performance of NFFlatten.flatten: time 0.02137/1.715, allocations: 17.28 MB / 1.28 GB, free: 3.688 MB / 0.8262 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.005133/1.721, allocations: 2.967 MB / 1.283 GB, free: 0.6914 MB / 0.8262 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.04622/1.767, allocations: 25.9 MB / 1.308 GB, free: 7.531 MB / 0.8575 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01285/1.78, allocations: 6.983 MB / 1.315 GB, free: 0.8008 MB / 0.8575 GB
Notification: Performance of NFPackage.collectConstants: time 0.005039/1.785, allocations: 1.16 MB / 1.316 GB, free: 15.64 MB / 0.8731 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.1411/1.926, allocations: 56.85 MB / 1.371 GB, free: 7.305 MB / 0.92 GB
Notification: Performance of NFScalarize.scalarize: time 0.005518/1.931, allocations: 2.721 MB / 1.374 GB, free: 4.656 MB / 0.92 GB
Notification: Performance of NFVerifyModel.verify: time 0.01226/1.944, allocations: 6.447 MB / 1.38 GB, free: 14.26 MB / 0.9356 GB
Notification: Performance of NFConvertDAE.convert: time 0.7995/2.743, allocations: 110.2 MB / 1.488 GB, free: 74.88 MB / 0.9512 GB
Notification: Performance of FrontEnd - DAE generated: time 7.644e-06/2.743, allocations: 4 kB / 1.488 GB, free: 74.87 MB / 0.9512 GB
Notification: Performance of FrontEnd: time 1.713e-06/2.743, allocations: 0 / 1.488 GB, free: 74.87 MB / 0.9512 GB
Notification: Performance of Transformations before backend: time 0.0005794/2.744, allocations: 0.6562 kB / 1.488 GB, free: 74.87 MB / 0.9512 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2278
 * Number of variables: 2278
Notification: Performance of Generate backend data structure: time 0.09803/2.842, allocations: 18.57 MB / 1.506 GB, free: 61.26 MB / 0.9512 GB
Notification: Performance of prepare preOptimizeDAE: time 3.835e-05/2.842, allocations: 8.031 kB / 1.506 GB, free: 61.25 MB / 0.9512 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01149/2.853, allocations: 2.08 MB / 1.508 GB, free: 59.57 MB / 0.9512 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01392/2.867, allocations: 6.975 MB / 1.515 GB, free: 55.67 MB / 0.9512 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0006214/2.868, allocations: 0.73 MB / 1.516 GB, free: 55.21 MB / 0.9512 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.003619/2.871, allocations: 0.8487 MB / 1.516 GB, free: 54.64 MB / 0.9512 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.03525/2.907, allocations: 15.35 MB / 1.531 GB, free: 46.6 MB / 0.9512 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0002242/2.907, allocations: 3.375 kB / 1.531 GB, free: 46.6 MB / 0.9512 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.002267/2.909, allocations: 342.1 kB / 1.532 GB, free: 46.53 MB / 0.9512 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0001795/2.909, allocations: 277.6 kB / 1.532 GB, free: 46.3 MB / 0.9512 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.03366/2.943, allocations: 17.45 MB / 1.549 GB, free: 34.2 MB / 0.9512 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.08937/3.032, allocations: 58.34 MB / 1.606 GB, free: 1.84 MB / 0.9669 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.0241/3.056, allocations: 11.34 MB / 1.617 GB, free: 9.422 MB / 0.9825 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.0168/3.073, allocations: 7.775 MB / 1.625 GB, free: 1.633 MB / 0.9825 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.03586/3.109, allocations: 43.46 MB / 1.667 GB, free: 12.69 MB / 1.045 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0002528/3.109, allocations: 137.7 kB / 1.667 GB, free: 12.54 MB / 1.045 GB
Notification: Performance of pre-optimization done (n=1023): time 1.196e-05/3.109, allocations: 0 / 1.667 GB, free: 12.54 MB / 1.045 GB
Notification: Performance of matching and sorting (n=1031): time 0.129/3.238, allocations: 46.56 MB / 1.713 GB, free: 13.39 MB / 1.092 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001588/3.238, allocations: 223.2 kB / 1.713 GB, free: 13.14 MB / 1.092 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01134/3.25, allocations: 6.346 MB / 1.719 GB, free: 6.832 MB / 1.092 GB
Notification: Performance of collectPreVariables (initialization): time 0.00259/3.252, allocations: 181.7 kB / 1.719 GB, free: 6.648 MB / 1.092 GB
Notification: Performance of collectInitialEqns (initialization): time 0.003995/3.256, allocations: 4.054 MB / 1.723 GB, free: 2.598 MB / 1.092 GB
Notification: Performance of collectInitialBindings (initialization): time 0.005051/3.261, allocations: 3.602 MB / 1.727 GB, free: 15.05 MB / 1.107 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.004914/3.266, allocations: 2.137 MB / 1.729 GB, free: 12.9 MB / 1.107 GB
Notification: Performance of setup shared object (initialization): time 0.0001362/3.266, allocations: 301.1 kB / 1.729 GB, free: 12.6 MB / 1.107 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.0159/3.282, allocations: 7.524 MB / 1.737 GB, free: 5.059 MB / 1.107 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01929/3.302, allocations: 9.122 MB / 1.745 GB, free: 11.41 MB / 1.123 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.04036/3.342, allocations: 20.59 MB / 1.766 GB, free: 5.738 MB / 1.139 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 4.347e-05/3.342, allocations: 12 kB / 1.766 GB, free: 5.727 MB / 1.139 GB
Notification: Performance of matching and sorting (n=1279) (initialization): time 0.04806/3.39, allocations: 19.83 MB / 1.785 GB, free: 2.105 MB / 1.154 GB
Notification: Performance of prepare postOptimizeDAE: time 4.992e-05/3.39, allocations: 21.94 kB / 1.785 GB, free: 2.086 MB / 1.154 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.449e-05/3.39, allocations: 40 kB / 1.785 GB, free: 2.047 MB / 1.154 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.0136/3.404, allocations: 2.163 MB / 1.787 GB, free: 15.82 MB / 1.17 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01117/3.415, allocations: 2.581 MB / 1.79 GB, free: 13.34 MB / 1.17 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.6603/4.075, allocations: 45.53 MB / 1.834 GB, free: 0.5508 GB / 1.201 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.009397/4.085, allocations: 0.7802 MB / 1.835 GB, free: 0.5508 GB / 1.201 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003145/4.088, allocations: 0.7635 MB / 1.836 GB, free: 0.5508 GB / 1.201 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.02067/4.109, allocations: 10.33 MB / 1.846 GB, free: 0.5506 GB / 1.201 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.01402/4.123, allocations: 9.08 MB / 1.855 GB, free: 0.5491 GB / 1.201 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.03002/4.153, allocations: 20.53 MB / 1.875 GB, free: 0.5408 GB / 1.201 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 8.423e-05/4.153, allocations: 14.16 kB / 1.875 GB, free: 0.5408 GB / 1.201 GB
Notification: Performance of matching and sorting (n=1279) (initialization_lambda0): time 0.0421/4.195, allocations: 19.76 MB / 1.894 GB, free: 0.5345 GB / 1.201 GB
Notification: Performance of prepare postOptimizeDAE: time 4.394e-05/4.195, allocations: 23.19 kB / 1.894 GB, free: 0.5345 GB / 1.201 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.586e-05/4.195, allocations: 41.44 kB / 1.894 GB, free: 0.5345 GB / 1.201 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01313/4.208, allocations: 2.163 MB / 1.896 GB, free: 0.5339 GB / 1.201 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01042/4.218, allocations: 2.568 MB / 1.899 GB, free: 0.5337 GB / 1.201 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02784/4.246, allocations: 45.52 MB / 1.943 GB, free: 0.4955 GB / 1.201 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.009496/4.256, allocations: 0.7833 MB / 1.944 GB, free: 0.4953 GB / 1.201 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003112/4.259, allocations: 0.7596 MB / 1.945 GB, free: 0.4953 GB / 1.201 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 170
 * Number of states: 0 ()
 * Number of discrete variables: 49 (accumulator.medium.phase,receiver.medium.phase,accumulator.outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,controlValve.outlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI2.I.local_reset,PI1.I.local_reset,PI.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (988):
 * Single equations (assignments): 915
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 47
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 26
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,13,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.004929/4.264, allocations: 1.012 MB / 1.946 GB, free: 0.4946 GB / 1.201 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.003501/4.267, allocations: 0.9212 MB / 1.946 GB, free: 0.4946 GB / 1.201 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.06008/4.327, allocations: 33.42 MB / 1.979 GB, free: 496.2 MB / 1.201 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.03676/4.364, allocations: 20.19 MB / 1.999 GB, free: 481.9 MB / 1.201 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 5.44e-05/4.364, allocations: 18.84 kB / 1.999 GB, free: 481.9 MB / 1.201 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0002196/4.364, allocations: 51.14 kB / 1.999 GB, free: 481.9 MB / 1.201 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.07001/4.434, allocations: 42.8 MB / 2.041 GB, free: 438.7 MB / 1.201 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.000119/4.435, allocations: 8 kB / 2.041 GB, free: 438.7 MB / 1.201 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.009921/4.444, allocations: 2.3 MB / 2.043 GB, free: 436.4 MB / 1.201 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.005705/4.45, allocations: 2.16 MB / 2.045 GB, free: 434.2 MB / 1.201 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002835/4.453, allocations: 403.7 kB / 2.045 GB, free: 433.8 MB / 1.201 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02631/4.479, allocations: 46.71 MB / 2.091 GB, free: 384.1 MB / 1.201 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.144e-06/4.479, allocations: 7.781 kB / 2.091 GB, free: 384.1 MB / 1.201 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.05445/4.534, allocations: 31.11 MB / 2.121 GB, free: 352.9 MB / 1.201 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.007774/4.542, allocations: 2.689 MB / 2.124 GB, free: 350.3 MB / 1.201 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.003585/4.545, allocations: 216 kB / 2.124 GB, free: 350 MB / 1.201 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.008886/4.554, allocations: 0.8468 MB / 2.125 GB, free: 349.2 MB / 1.201 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.002837/4.557, allocations: 0.7791 MB / 2.126 GB, free: 348.4 MB / 1.201 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.002234/4.559, allocations: 0.5388 MB / 2.126 GB, free: 347.9 MB / 1.201 GB
Notification: Performance of sorting global known variables: time 0.007682/4.567, allocations: 4.322 MB / 2.131 GB, free: 343.6 MB / 1.201 GB
Notification: Performance of sort global known variables: time 1.6e-07/4.567, allocations: 3.938 kB / 2.131 GB, free: 343.6 MB / 1.201 GB
Notification: Performance of remove unused functions: time 0.06905/4.636, allocations: 8.945 MB / 2.139 GB, free: 335.6 MB / 1.201 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 3
 * Number of states: 56 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,compressor.m_flow,compressor.phi,compressor.omega,receiver.M,receiver.U_med,fan.m_flow,fan1.m_flow,accumulator.M,accumulator.U_med,accumulator.m_flow_in,heatCapacitor.T,sensorVaporQuality8.value,PI.I.y,PI1.I.y,PI2.I.y,firstOrder2.y)
 * Number of discrete variables: 117 (condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[9].outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[9].outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,accumulator.outlet.state.phase,$cse1.phase,$cse2,$cse3.phase,$cse4,$cse5.phase,$cse6,$cse7.phase,$cse8,$cse9.phase,$cse11.phase,$cse12,$cse15.phase,$cse18.phase,$cse19,$cse21.phase,$cse22,$cse24.phase,$cse25,$cse27.phase,$cse28,$cse30.phase,$cse31,$cse33.phase,$cse34,$cse37.phase,$cse38.phase,$cse39,$cse41.phase,$cse42,$cse45.phase,$cse46,$cse49.phase,$cse50,$cse53.phase,$cse54,$cse57.phase,$cse58,$cse61.phase,$cse62,$cse65.phase,$cse66,$cse69.phase,$cse70,$cse73.phase,$cse74,$cse77.phase,$cse78,$cse81.phase,$cse82,$cse85.phase,$cse86,$cse89.phase,$cse90,$cse93.phase,$cse94,$cse97.phase,$cse98,$cse101.phase,$cse102,$cse105.phase,$cse106,$cse109.phase,$cse110,$cse113.phase,$cse114,$cse117.phase,$cse118,$cse122.phase,$cse123,$cse124.phase,$cse125,$cse126.phase,$cse127,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[10].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[10].state.phase,controlValve.outlet.state.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (960):
 * Single equations (assignments): 850
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 82
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 28
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,1), (1,1), (1,3), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.2228/4.859, allocations: 50.83 MB / 2.189 GB, free: 286.6 MB / 1.201 GB
Notification: Performance of simCode: created initialization part: time 0.05914/4.918, allocations: 33.32 MB / 2.222 GB, free: 252.6 MB / 1.201 GB
Notification: Performance of simCode: created event and clocks part: time 1.903e-05/4.918, allocations: 6.562 kB / 2.222 GB, free: 252.6 MB / 1.201 GB
Notification: Performance of simCode: created simulation system equations: time 0.0213/4.939, allocations: 13.12 MB / 2.234 GB, free: 239 MB / 1.201 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.01915/4.958, allocations: 3.894 MB / 2.238 GB, free: 235.2 MB / 1.201 GB
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(compressor.outputQuantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10446:11-10446:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.05071/5.009, allocations: 30 MB / 2.267 GB, free: 205.2 MB / 1.201 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.007439/5.016, allocations: 6.803 MB / 2.274 GB, free: 198.4 MB / 1.201 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.008095/5.024, allocations: 1.826 MB / 2.276 GB, free: 196.6 MB / 1.201 GB
Notification: Performance of SimCode: time 1.332e-06/5.024, allocations: 0 / 2.276 GB, free: 196.6 MB / 1.201 GB
Notification: Performance of Templates: time 2.564/7.588, allocations: 1.702 GB / 3.978 GB, free: 96.85 MB / 1.201 GB
[Timeout remaining time 652]
make -j1 -f ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.makefile [Timeout 660]
(rm -f ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe ; mkfifo ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe ; head -c 1048576 < ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe >> ../files/ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.sim & ./ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump  -abortSlowSimulation -alarm=1200  -emit_protected -lv LOG_STATS > ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe 2>&1) [Timeout 1200]
diffSimulationResults("ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump_res.mat","/mnt/ReferenceFiles/ThermofluidStream-main-regression/ReferenceData/ThermofluidStream.Examples.HeatPump_ref.mat","/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.diff",relTol=0.003,relTolDiffMinMax=0.003,rangeDelta=0.001) [Timeout 660]
[Timeout remaining time 660]
Reference file matches