Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.2/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo", uses=false) Using package TransiEnt with version 2.0.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo) Using package DataFiles with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo) Using package Design with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo) Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo) Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo) Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo) Using package Modelica_StateGraph2 with version 2.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo) Using package Modelica_LinearSystems2 with version 2.4.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo) Using package ModelicaReference with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo) Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo) Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo) Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo) Using package Buildings with version 9.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.2/package.mo) Running command: translateModel(TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled,tolerance=1e-06,outputFormat="empty",numberOfIntervals=70080,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled") translateModel(TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled,tolerance=1e-06,outputFormat="empty",numberOfIntervals=70080,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled") Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.2/package.mo): time 2.211/2.211, allocations: 389.4 MB / 408.3 MB, free: 12.65 MB / 318.1 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0005518/0.0005514, allocations: 39.92 kB / 0.4883 GB, free: 4.742 MB / 398.1 MB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo): time 0.7097/0.7097, allocations: 127.2 MB / 0.702 GB, free: 5.594 MB / 0.4981 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo): time 0.1073/0.1073, allocations: 22.38 MB / 0.8388 GB, free: 16.56 MB / 0.5294 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo): time 0.012/0.012, allocations: 0.8868 MB / 0.9607 GB, free: 3.52 MB / 0.6388 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo): time 0.2602/0.2602, allocations: 45.03 MB / 1.126 GB, free: 97.98 MB / 0.6544 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo): time 0.1012/0.1012, allocations: 13.55 MB / 1.269 GB, free: 93.64 MB / 0.6544 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001233/0.001233, allocations: 115 kB / 1.402 GB, free: 7.289 MB / 0.7013 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001467/0.001467, allocations: 190.8 kB / 1.535 GB, free: 222.8 MB / 0.8263 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.653/1.653, allocations: 222.9 MB / 1.886 GB, free: 91.77 MB / 0.8888 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo): time 0.0005285/0.0005285, allocations: 35.89 kB / 2.067 GB, free: 15.18 MB / 0.92 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo): time 0.0006328/0.0006327, allocations: 35.89 kB / 2.248 GB, free: 5.387 MB / 1.092 GB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo): time 1.062/1.062, allocations: 220.8 MB / 2.645 GB, free: 132.2 MB / 1.123 GB Warning: Requested package TILMedia of version 1.8.0 ClaRa, but this package was already loaded with version 1.8.1 ClaRa. OpenModelica cannot reason about compatibility between the two packages since they are not semantic versions. Warning: TransiEnt requested package ClaRa of version 1.8.0. ClaRa 1.8.1 is used instead which states that it is only compatible with a conversion script. Use convertPackageToLibrary(TransiEnt, ClaRa, "1.8.1") to run the conversion script or proceed with potential issues as a result. Notification: TransiEnt requested package Buildings of version 9.0.0. Buildings 9.1.2 is used instead which states that it is fully compatible without conversion script needed. Notification: Performance of FrontEnd - loaded program: time 0.005166/0.005166, allocations: 308 kB / 2.892 GB, free: 111.8 MB / 1.123 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.5737/0.5789, allocations: 229.5 MB / 3.117 GB, free: 11.26 MB / 1.233 GB Notification: Performance of NFInst.instantiate(TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled): time 0.1163/0.6952, allocations: 110.7 MB / 3.225 GB, free: 12.17 MB / 1.342 GB Notification: Performance of NFInst.instExpressions: time 0.1249/0.8202, allocations: 55.7 MB / 3.279 GB, free: 4.316 MB / 1.389 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.03884/0.8591, allocations: 0.5597 MB / 3.28 GB, free: 3.754 MB / 1.389 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/SimCenter.mo:69:5-70:35:writable] Warning: Connector cycleSumPort is not balanced: The number of potential variables (0) is not equal to the number of flow variables (4). Notification: Performance of NFTyping.typeComponents: time 1.897/2.756, allocations: 13.49 MB / 3.293 GB, free: 17.02 MB / 1.389 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Basics/Functions/fullPathName.mo:2:1-78:17:writable] Warning: Pure function 'TransiEnt.Basics.Functions.fullPathName' contains a call to impure function 'Modelica.Utilities.Streams.print'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:524:13-528:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_pTxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEnthalpy_pTxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:177:13-181:19:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.density_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.density_phxi'. Notification: Performance of NFTyping.typeBindings: time 0.06747/2.824, allocations: 18.36 MB / 3.311 GB, free: 16.31 MB / 1.389 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:94:5-94:38:writable] Warning: Conditional component 'y1' is used in a non-connect context. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:100:5-100:49:writable] Warning: Conditional component 'y1' is used in a non-connect context. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:94:5-94:38:writable] Warning: Conditional component 'y1' is used in a non-connect context. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Grid/Heat/HeatGridControl/HeatDemandPrediction/HeatingGenerationCharline.mo:100:5-100:49:writable] Warning: Conditional component 'y1' is used in a non-connect context. Notification: Performance of NFTyping.typeClassSections: time 0.0573/2.881, allocations: 18.76 MB / 3.329 GB, free: 15.94 MB / 1.389 GB Notification: Performance of NFFlatten.flatten: time 0.1305/3.012, allocations: 64.6 MB / 3.392 GB, free: 1.512 MB / 1.389 GB Notification: Performance of NFFlatten.resolveConnections: time 0.06922/3.081, allocations: 23.62 MB / 3.415 GB, free: 2.953 MB / 1.405 GB Notification: Performance of NFEvalConstants.evaluate: time 0.06759/3.149, allocations: 23.83 MB / 3.438 GB, free: 6.953 MB / 1.42 GB Notification: Performance of NFSimplifyModel.simplify: time 0.0578/3.206, allocations: 25.46 MB / 3.463 GB, free: 1.957 MB / 1.436 GB Notification: Performance of NFPackage.collectConstants: time 0.0238/3.23, allocations: 3.719 MB / 3.467 GB, free: 14.23 MB / 1.452 GB Notification: Performance of NFFlatten.collectFunctions: time 0.03509/3.265, allocations: 5.3 MB / 3.472 GB, free: 9.051 MB / 1.452 GB Notification: Performance of NFScalarize.scalarize: time 0.03357/3.299, allocations: 15.59 MB / 3.487 GB, free: 9.617 MB / 1.467 GB Notification: Performance of NFVerifyModel.verify: time 0.06531/3.364, allocations: 23.3 MB / 3.51 GB, free: 2.387 MB / 1.483 GB Notification: Performance of NFConvertDAE.convert: time 0.1071/3.472, allocations: 61.52 MB / 3.57 GB, free: 6.508 MB / 1.545 GB Notification: Performance of FrontEnd - DAE generated: time 8.747e-06/3.472, allocations: 0 / 3.57 GB, free: 6.508 MB / 1.545 GB Notification: Performance of FrontEnd: time 4.999e-06/3.472, allocations: 4 kB / 3.57 GB, free: 6.504 MB / 1.545 GB Notification: Performance of Transformations before backend: time 0.002875/3.474, allocations: 0 / 3.57 GB, free: 6.504 MB / 1.545 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8029 * Number of variables: 8029 Notification: Performance of Generate backend data structure: time 0.1563/3.631, allocations: 48.66 MB / 3.618 GB, free: 5.844 MB / 1.592 GB Notification: Performance of prepare preOptimizeDAE: time 5.829e-05/3.631, allocations: 13.52 kB / 3.618 GB, free: 5.832 MB / 1.592 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.02703/3.658, allocations: 5.464 MB / 3.623 GB, free: 312 kB / 1.592 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.08747/3.745, allocations: 33.19 MB / 3.655 GB, free: 15.65 MB / 1.639 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.002555/3.748, allocations: 1.788 MB / 3.657 GB, free: 13.87 MB / 1.639 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.009829/3.758, allocations: 2.184 MB / 3.659 GB, free: 11.72 MB / 1.639 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.09823/3.856, allocations: 40.7 MB / 3.699 GB, free: 13.88 MB / 1.686 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.001044/3.857, allocations: 233.8 kB / 3.699 GB, free: 13.65 MB / 1.686 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.008066/3.865, allocations: 1.047 MB / 3.7 GB, free: 12.63 MB / 1.686 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.002124/3.867, allocations: 1.497 MB / 3.702 GB, free: 11.13 MB / 1.686 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.07553/3.943, allocations: 28.83 MB / 3.73 GB, free: 14.27 MB / 1.717 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.3234/4.266, allocations: 220.9 MB / 3.946 GB, free: 11.17 MB / 1.936 GB Notification: Performance of preOpt comSubExp (simulation): time 0.06122/4.328, allocations: 29.48 MB / 3.974 GB, free: 12.3 MB / 1.967 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.03647/4.364, allocations: 15.37 MB / 3.989 GB, free: 12.48 MB / 1.983 GB Notification: Performance of preOpt evalFunc (simulation): time 0.005275/4.37, allocations: 0.9227 MB / 3.99 GB, free: 11.7 MB / 1.983 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.04882/4.418, allocations: 19.95 MB / 4.01 GB, free: 7.051 MB / 1.999 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.9357/5.354, allocations: 8.954 MB / 4.018 GB, free: 0.6577 GB / 1.999 GB Notification: Performance of pre-optimization done (n=4118): time 0.0001201/5.354, allocations: 0 / 4.018 GB, free: 0.6577 GB / 1.999 GB Notification: Performance of matching and sorting (n=4127): time 3.196/8.55, allocations: 0.8887 GB / 4.907 GB, free: 0.5391 GB / 1.999 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.003402/8.554, allocations: 6.898 MB / 4.914 GB, free: 0.5316 GB / 1.999 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.1076/8.661, allocations: 43.9 MB / 4.957 GB, free: 0.5175 GB / 1.999 GB Notification: Performance of collectPreVariables (initialization): time 0.006666/8.668, allocations: 404.4 kB / 4.957 GB, free: 0.5172 GB / 1.999 GB Notification: Performance of collectInitialEqns (initialization): time 0.02292/8.691, allocations: 18.46 MB / 4.975 GB, free: 0.5029 GB / 1.999 GB Notification: Performance of collectInitialBindings (initialization): time 0.01667/8.708, allocations: 13.58 MB / 4.988 GB, free: 0.4925 GB / 1.999 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.0304/8.738, allocations: 6.689 MB / 4.995 GB, free: 0.4898 GB / 1.999 GB Notification: Performance of setup shared object (initialization): time 5.474e-05/8.738, allocations: 308.5 kB / 4.995 GB, free: 0.4895 GB / 1.999 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.04486/8.783, allocations: 15.05 MB / 5.01 GB, free: 495.5 MB / 1.999 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.05079/8.834, allocations: 24.41 MB / 5.034 GB, free: 471.6 MB / 1.999 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.3771/9.211, allocations: 103.2 MB / 5.135 GB, free: 365.8 MB / 1.999 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0004385/9.211, allocations: 100 kB / 5.135 GB, free: 365.7 MB / 1.999 GB Notification: Performance of matching and sorting (n=5706) (initialization): time 0.1191/9.33, allocations: 45.95 MB / 5.18 GB, free: 319.5 MB / 1.999 GB Notification: Performance of prepare postOptimizeDAE: time 0.0006275/9.331, allocations: 271.4 kB / 5.18 GB, free: 319.2 MB / 1.999 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.003204/9.334, allocations: 1.202 MB / 5.181 GB, free: 318 MB / 1.999 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.01566/9.35, allocations: 4.609 MB / 5.185 GB, free: 313.3 MB / 1.999 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02095/9.371, allocations: 5.658 MB / 5.191 GB, free: 307.6 MB / 1.999 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.04238/9.413, allocations: 61.97 MB / 5.252 GB, free: 241.1 MB / 1.999 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.03245/9.446, allocations: 1.409 MB / 5.253 GB, free: 239.7 MB / 1.999 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.007148/9.453, allocations: 1.593 MB / 5.254 GB, free: 238.1 MB / 1.999 GB Warning: Assuming fixed start value for the following 74 variables: heatingLoadCharline_1.Q_dem:VARIABLE(unit = "J" fixed = true ) type: Real heatingLoadCharline_2.Q_dem:VARIABLE(unit = "J" fixed = true ) type: Real $STATESET1.x:VARIABLE(start = /*Real*/($STATESET1.A[1]) * $START.HeatConsumer.p + /*Real*/($STATESET1.A[2]) * $START.HeatConsumer.h fixed = true ) type: Real HeatingCondenserLeft.h:VARIABLE(start = HeatingCondenserLeft.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real HeatingCondenserLeft.p:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 stateSelect=StateSelect.prefer ) "System pressure" type: Real supplyPipeLeft1.h[1]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft1.h[2]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft1.h[3]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft1.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft1.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft2.h[1]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft2.h[2]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft2.h[3]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft2.p[1]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft2.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft2.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft1.h[1]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft1.h[2]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft1.h[3]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft1.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft1.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft2.h[1]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft2.h[2]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft2.h[3]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft2.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft2.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft2.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft3.h[1]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft3.h[2]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft3.h[3]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft3.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft3.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft3.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] HeatingCondenserRight.h:VARIABLE(start = HeatingCondenserRight.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real HeatingCondenserRight.p:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 stateSelect=StateSelect.prefer ) "System pressure" type: Real supplyPipeRight1.h[1]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight1.h[2]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight1.h[3]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight1.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight1.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight2.h[1]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight2.h[2]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight2.h[3]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight2.p[1]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight2.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight2.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight1.h[1]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight1.h[2]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight1.h[3]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight1.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight1.p[2]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight1.p[3]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight2.h[1]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight2.h[2]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight2.h[3]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight2.p[1]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight2.p[2]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight2.p[3]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight3.h[1]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight3.h[2]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight3.h[3]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight3.p[1]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight3.p[2]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight3.p[3]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] PID11.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID10.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID7.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID6.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID5.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID4.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID3.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID2.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID1.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.07843/9.532, allocations: 24.37 MB / 5.278 GB, free: 213.8 MB / 1.999 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.03761/9.569, allocations: 23.93 MB / 5.302 GB, free: 185 MB / 1.999 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.3629/9.932, allocations: 101.8 MB / 5.401 GB, free: 78.32 MB / 1.999 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0003857/9.933, allocations: 100 kB / 5.401 GB, free: 78.23 MB / 1.999 GB Notification: Performance of matching and sorting (n=5706) (initialization_lambda0): time 0.111/10.04, allocations: 44.36 MB / 5.444 GB, free: 33.61 MB / 1.999 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002543/10.04, allocations: 266.8 kB / 5.445 GB, free: 33.32 MB / 1.999 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.00259/10.05, allocations: 1.214 MB / 5.446 GB, free: 32.11 MB / 1.999 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.0152/10.06, allocations: 4.293 MB / 5.45 GB, free: 27.69 MB / 1.999 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02075/10.08, allocations: 5.604 MB / 5.456 GB, free: 22.07 MB / 1.999 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 1.002/11.08, allocations: 59.74 MB / 5.514 GB, free: 0.5686 GB / 2.014 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.03391/11.12, allocations: 1.338 MB / 5.515 GB, free: 0.5686 GB / 2.014 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.007206/11.13, allocations: 1.563 MB / 5.517 GB, free: 0.5686 GB / 2.014 GB Warning: Assuming fixed start value for the following 74 variables: heatingLoadCharline_1.Q_dem:VARIABLE(unit = "J" fixed = true ) type: Real heatingLoadCharline_2.Q_dem:VARIABLE(unit = "J" fixed = true ) type: Real $STATESET1.x:VARIABLE(start = /*Real*/($STATESET1.A[1]) * $START.HeatConsumer.p + /*Real*/($STATESET1.A[2]) * $START.HeatConsumer.h fixed = true ) type: Real HeatingCondenserLeft.h:VARIABLE(start = HeatingCondenserLeft.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real HeatingCondenserLeft.p:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 stateSelect=StateSelect.prefer ) "System pressure" type: Real supplyPipeLeft1.h[1]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft1.h[2]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft1.h[3]:VARIABLE(start = supplyPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft1.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft1.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft2.h[1]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft2.h[2]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft2.h[3]:VARIABLE(start = supplyPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeLeft2.p[1]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft2.p[2]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeLeft2.p[3]:VARIABLE(min = 0.0 start = supplyPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft1.h[1]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft1.h[2]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft1.h[3]:VARIABLE(start = returnPipeLeft1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft1.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft1.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft2.h[1]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft2.h[2]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft2.h[3]:VARIABLE(start = returnPipeLeft2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft2.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft2.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft2.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft3.h[1]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft3.h[2]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft3.h[3]:VARIABLE(start = returnPipeLeft3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeLeft3.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft3.p[2]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeLeft3.p[3]:VARIABLE(min = 0.0 start = returnPipeLeft3.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] HeatingCondenserRight.h:VARIABLE(start = HeatingCondenserRight.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real HeatingCondenserRight.p:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 stateSelect=StateSelect.prefer ) "System pressure" type: Real supplyPipeRight1.h[1]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight1.h[2]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight1.h[3]:VARIABLE(start = supplyPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight1.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight1.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight2.h[1]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight2.h[2]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight2.h[3]:VARIABLE(start = supplyPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] supplyPipeRight2.p[1]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight2.p[2]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] supplyPipeRight2.p[3]:VARIABLE(min = 0.0 start = supplyPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight1.h[1]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight1.h[2]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight1.h[3]:VARIABLE(start = returnPipeRight1.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight1.p[1]:VARIABLE(min = 0.0 start = returnPipeLeft1.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight1.p[2]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight1.p[3]:VARIABLE(min = 0.0 start = returnPipeRight1.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight2.h[1]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight2.h[2]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight2.h[3]:VARIABLE(start = returnPipeRight2.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight2.p[1]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight2.p[2]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight2.p[3]:VARIABLE(min = 0.0 start = returnPipeRight2.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight3.h[1]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight3.h[2]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight3.h[3]:VARIABLE(start = returnPipeRight3.mechanicalEquilibrium.h_start[3] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] returnPipeRight3.p[1]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[1] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight3.p[2]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[2] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] returnPipeRight3.p[3]:VARIABLE(min = 0.0 start = returnPipeRight3.p_start_internal[3] unit = "Pa" fixed = true nominal = 100000.0 protected = true ) "Cell pressure" type: Real [3] PID11.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID10.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID7.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID6.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID5.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID4.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID3.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID2.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID1.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 1567 * Number of states: 0 () * Number of discrete variables: 145 ($PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$whenCondition33,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,$whenCondition32,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,$whenCondition15,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,$whenCondition14,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,$whenCondition9,$PRE.heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,$whenCondition8,$PRE.heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,$whenCondition6,$PRE.heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,$whenCondition5,$PRE.heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,$whenCondition3,heatingLoadCharline_1.hour_of_day.count,$PRE.heatingLoadCharline_1.hour_of_day.count,heatingLoadCharline_1.hour_of_day.T_start,$PRE.heatingLoadCharline_1.hour_of_day.T_start,$whenCondition2,heatingLoadCharline_2.hour_of_day.count,$PRE.heatingLoadCharline_2.hour_of_day.count,heatingLoadCharline_2.hour_of_day.T_start,$PRE.heatingLoadCharline_2.hour_of_day.T_start,$whenCondition1,$PRE.heatingLoadCharline_2.weekendPulse.pulse.count,$PRE.heatingLoadCharline_2.weekendPulse.pulse.T_start,$PRE.heatingLoadCharline_1.weekendPulse.pulse.count,$PRE.heatingLoadCharline_1.weekendPulse.pulse.T_start,$PRE.PID11.time_lag_I_activation.entryTime,$PRE.PID11.switch_OnOff.u2,$PRE.PID10.time_lag_I_activation.entryTime,$PRE.PID10.switch_OnOff.u2,$PRE.PID7.time_lag_I_activation.entryTime,$PRE.PID7.switch_OnOff.u2,$PRE.PID6.time_lag_I_activation.entryTime,$PRE.PID6.switch_OnOff.u2,$PRE.PID5.time_lag_I_activation.entryTime,$PRE.PID5.switch_OnOff.u2,$PRE.PID4.time_lag_I_activation.entryTime,$PRE.PID4.switch_OnOff.u2,$PRE.PID3.time_lag_I_activation.entryTime,$PRE.PID3.switch_OnOff.u2,$PRE.PID2.time_lag_I_activation.entryTime,$PRE.PID2.switch_OnOff.u2,$PRE.PID1.time_lag_I_activation.entryTime,$PRE.PID1.switch_OnOff.u2,$PRE.PID.time_lag_I_activation.entryTime,$PRE.PID.switch_OnOff.u2,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.weekendPulse.pulse.count,heatingLoadCharline_2.weekendPulse.pulse.T_start,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.weekendPulse.pulse.count,heatingLoadCharline_1.weekendPulse.pulse.T_start,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,$PRE.heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,PID11.I_activation.y,PID11.time_lag_I_activation.entryTime,PID11.switch_OnOff.u2,PID10.I_activation.y,PID10.time_lag_I_activation.entryTime,PID10.switch_OnOff.u2,PID7.I_activation.y,PID7.time_lag_I_activation.entryTime,PID7.switch_OnOff.u2,PID6.I_activation.y,PID6.time_lag_I_activation.entryTime,PID6.switch_OnOff.u2,returnPipeRight3.heatTransfer.table_block.tableID,returnPipeRight2.heatTransfer.table_block.tableID,returnPipeRight1.heatTransfer.table_block.tableID,supplyPipeRight2.heatTransfer.table_block.tableID,supplyPipeRight1.heatTransfer.table_block.tableID,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,$PRE.temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,PID5.I_activation.y,PID5.time_lag_I_activation.entryTime,PID5.switch_OnOff.u2,PID4.I_activation.y,PID4.time_lag_I_activation.entryTime,PID4.switch_OnOff.u2,PID3.I_activation.y,PID3.time_lag_I_activation.entryTime,PID3.switch_OnOff.u2,PID2.I_activation.y,PID2.time_lag_I_activation.entryTime,PID2.switch_OnOff.u2,PID1.I_activation.y,PID1.time_lag_I_activation.entryTime,PID1.switch_OnOff.u2,PID.I_activation.y,PID.time_lag_I_activation.entryTime,PID.switch_OnOff.u2,returnPipeLeft3.heatTransfer.table_block.tableID,returnPipeLeft2.heatTransfer.table_block.tableID,returnPipeLeft1.heatTransfer.table_block.tableID,supplyPipeLeft2.heatTransfer.table_block.tableID,supplyPipeLeft1.heatTransfer.table_block.tableID,$whenCondition4,$whenCondition7,$whenCondition10,$whenCondition11,$whenCondition12,$whenCondition13,$whenCondition16,$whenCondition17,$whenCondition18,$whenCondition19,$whenCondition20,$whenCondition21,$whenCondition22,$whenCondition23,$whenCondition24,$whenCondition25,$whenCondition26,$whenCondition27,$whenCondition28,$whenCondition29,$whenCondition30,$whenCondition31) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (3376): * Single equations (assignments): 2986 * Array equations: 0 * Algorithm blocks: 4 * Record equations: 344 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 2 * Torn equation systems: 40 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 1 system {(2,100.0%)} * Non-linear Jacobian (size): 1 system {2} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 28 systems {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%), (1,3,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 12 systems {(2,6), (2,6), (1,7), (1,18), (2,19), (2,7), (1,16), (1,16), (1,7), (1,18), (1,16), (1,16)} Notification: Performance of prepare postOptimizeDAE: time 0.01223/11.14, allocations: 2.642 MB / 5.519 GB, free: 0.5683 GB / 2.014 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01374/11.15, allocations: 4.052 MB / 5.523 GB, free: 0.5683 GB / 2.014 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.111/11.26, allocations: 37.48 MB / 5.56 GB, free: 0.5622 GB / 2.014 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.0008718/11.26, allocations: 331.5 kB / 5.56 GB, free: 0.5622 GB / 2.014 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0002141/11.26, allocations: 54.25 kB / 5.56 GB, free: 0.5622 GB / 2.014 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.08011/11.34, allocations: 27.7 MB / 5.587 GB, free: 0.5524 GB / 2.014 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1892/11.53, allocations: 73.29 MB / 5.659 GB, free: 0.5213 GB / 2.014 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.002718/11.54, allocations: 0.9025 MB / 5.66 GB, free: 0.521 GB / 2.014 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.0141/11.55, allocations: 2.851 MB / 5.663 GB, free: 0.5203 GB / 2.014 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.01738/11.57, allocations: 4.799 MB / 5.667 GB, free: 0.518 GB / 2.014 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.006475/11.57, allocations: 0.7611 MB / 5.668 GB, free: 0.5176 GB / 2.014 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.03993/11.61, allocations: 60.44 MB / 5.727 GB, free: 473.2 MB / 2.014 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 0.001292/11.62, allocations: 1.724 MB / 5.729 GB, free: 471.6 MB / 2.014 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1185/11.73, allocations: 54.25 MB / 5.782 GB, free: 428.6 MB / 2.014 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02619/11.76, allocations: 8.512 MB / 5.79 GB, free: 420.8 MB / 2.014 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01359/11.77, allocations: 483.9 kB / 5.79 GB, free: 420.3 MB / 2.014 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.02529/11.8, allocations: 0.8585 MB / 5.791 GB, free: 419.5 MB / 2.014 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.006998/11.81, allocations: 1.773 MB / 5.793 GB, free: 417.7 MB / 2.014 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.005149/11.81, allocations: 0.8589 MB / 5.794 GB, free: 416.8 MB / 2.014 GB Notification: Performance of sorting global known variables: time 0.05586/11.87, allocations: 30.4 MB / 5.824 GB, free: 386.6 MB / 2.014 GB Notification: Performance of sort global known variables: time 8.12e-07/11.87, allocations: 0 / 5.824 GB, free: 386.6 MB / 2.014 GB Notification: Performance of remove unused functions: time 0.06847/11.94, allocations: 13.6 MB / 5.837 GB, free: 373.1 MB / 2.014 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 166 * Number of states: 134 (PID.smoothPIDInput.y_aux,PID.smoothPIDOutput.y_aux,PID.smoothPIDOutput1.y_aux,PID.resetValueI,PID1.smoothPIDInput.y_aux,PID1.smoothPIDOutput.y_aux,PID1.smoothPIDOutput1.y_aux,PID1.resetValueI,PID2.smoothPIDInput.y_aux,PID2.smoothPIDOutput.y_aux,PID2.smoothPIDOutput1.y_aux,PID2.resetValueI,PID3.smoothPIDInput.y_aux,PID3.smoothPIDOutput.y_aux,PID3.smoothPIDOutput1.y_aux,PID3.resetValueI,PID4.smoothPIDInput.y_aux,PID4.smoothPIDOutput.y_aux,PID4.smoothPIDOutput1.y_aux,PID4.resetValueI,PID5.smoothPIDInput.y_aux,PID5.smoothPIDOutput.y_aux,PID5.smoothPIDOutput1.y_aux,PID5.resetValueI,PID6.smoothPIDInput.y_aux,PID6.smoothPIDOutput.y_aux,PID6.smoothPIDOutput1.y_aux,PID6.resetValueI,PID7.smoothPIDInput.y_aux,PID7.smoothPIDOutput.y_aux,PID7.smoothPIDOutput1.y_aux,PID7.resetValueI,PID10.smoothPIDInput.y_aux,PID10.smoothPIDOutput.y_aux,PID10.smoothPIDOutput1.y_aux,PID10.resetValueI,PID11.smoothPIDInput.y_aux,PID11.smoothPIDOutput.y_aux,PID11.smoothPIDOutput1.y_aux,PID11.resetValueI,$STATESET1.x,HeatingCondenserLeft.h,HeatingCondenserLeft.p,supplyPipeLeft1.h[1],supplyPipeLeft1.h[2],supplyPipeLeft1.h[3],supplyPipeLeft1.p[2],supplyPipeLeft1.p[3],supplyPipeLeft2.h[1],supplyPipeLeft2.h[2],supplyPipeLeft2.h[3],supplyPipeLeft2.p[1],supplyPipeLeft2.p[2],supplyPipeLeft2.p[3],returnPipeLeft1.h[1],returnPipeLeft1.h[2],returnPipeLeft1.h[3],returnPipeLeft1.p[2],returnPipeLeft1.p[3],returnPipeLeft2.h[1],returnPipeLeft2.h[2],returnPipeLeft2.h[3],returnPipeLeft2.p[1],returnPipeLeft2.p[2],returnPipeLeft2.p[3],returnPipeLeft3.h[1],returnPipeLeft3.h[2],returnPipeLeft3.h[3],returnPipeLeft3.p[1],returnPipeLeft3.p[2],returnPipeLeft3.p[3],PID.resetValueP,PID.resetValueID,PID.I.y,PID1.resetValueP,PID1.resetValueID,PID1.I.y,PID2.resetValueP,PID2.resetValueID,PID2.I.y,PID3.resetValueP,PID3.resetValueID,PID3.I.y,PID4.resetValueP,PID4.resetValueID,PID4.I.y,PID5.resetValueP,PID5.resetValueID,PID5.I.y,HeatingCondenserRight.h,HeatingCondenserRight.p,supplyPipeRight1.h[1],supplyPipeRight1.h[2],supplyPipeRight1.h[3],supplyPipeRight1.p[2],supplyPipeRight1.p[3],supplyPipeRight2.h[1],supplyPipeRight2.h[2],supplyPipeRight2.h[3],supplyPipeRight2.p[1],supplyPipeRight2.p[2],supplyPipeRight2.p[3],returnPipeRight1.h[1],returnPipeRight1.h[2],returnPipeRight1.h[3],returnPipeRight1.p[1],returnPipeRight1.p[2],returnPipeRight1.p[3],returnPipeRight2.h[1],returnPipeRight2.h[2],returnPipeRight2.h[3],returnPipeRight2.p[1],returnPipeRight2.p[2],returnPipeRight2.p[3],returnPipeRight3.h[1],returnPipeRight3.h[2],returnPipeRight3.h[3],returnPipeRight3.p[1],returnPipeRight3.p[2],returnPipeRight3.p[3],PID6.resetValueP,PID6.resetValueID,PID6.I.y,PID7.resetValueP,PID7.resetValueID,PID7.I.y,PID10.resetValueP,PID10.resetValueID,PID10.I.y,PID11.resetValueP,PID11.resetValueID,PID11.I.y,heatingLoadCharline_1.Q_dem,heatingLoadCharline_2.Q_dem) * Number of discrete variables: 99 ($whenCondition1,heatingLoadCharline_2.hour_of_day.T_start,heatingLoadCharline_2.hour_of_day.count,$whenCondition2,heatingLoadCharline_1.hour_of_day.T_start,heatingLoadCharline_1.hour_of_day.count,$whenCondition31,$whenCondition30,$whenCondition29,$whenCondition28,$whenCondition27,$whenCondition26,$whenCondition25,$whenCondition24,$whenCondition23,$whenCondition22,$whenCondition21,$whenCondition20,$whenCondition19,$whenCondition18,$whenCondition17,$whenCondition16,$whenCondition15,$whenCondition14,$whenCondition13,$whenCondition12,$whenCondition11,$whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,supplyPipeLeft1.heatTransfer.table_block.tableID,supplyPipeLeft2.heatTransfer.table_block.tableID,returnPipeLeft1.heatTransfer.table_block.tableID,returnPipeLeft2.heatTransfer.table_block.tableID,returnPipeLeft3.heatTransfer.table_block.tableID,PID.switch_OnOff.u2,PID.time_lag_I_activation.entryTime,PID.I_activation.y,PID1.switch_OnOff.u2,PID1.time_lag_I_activation.entryTime,PID1.I_activation.y,PID2.switch_OnOff.u2,PID2.time_lag_I_activation.entryTime,PID2.I_activation.y,PID3.switch_OnOff.u2,PID3.time_lag_I_activation.entryTime,PID3.I_activation.y,PID4.switch_OnOff.u2,PID4.time_lag_I_activation.entryTime,PID4.I_activation.y,PID5.switch_OnOff.u2,PID5.time_lag_I_activation.entryTime,PID5.I_activation.y,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,supplyPipeRight1.heatTransfer.table_block.tableID,supplyPipeRight2.heatTransfer.table_block.tableID,returnPipeRight1.heatTransfer.table_block.tableID,returnPipeRight2.heatTransfer.table_block.tableID,returnPipeRight3.heatTransfer.table_block.tableID,PID6.switch_OnOff.u2,PID6.time_lag_I_activation.entryTime,PID6.I_activation.y,PID7.switch_OnOff.u2,PID7.time_lag_I_activation.entryTime,PID7.I_activation.y,PID10.switch_OnOff.u2,PID10.time_lag_I_activation.entryTime,PID10.I_activation.y,PID11.switch_OnOff.u2,PID11.time_lag_I_activation.entryTime,PID11.I_activation.y,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.weekendPulse.pulse.T_start,heatingLoadCharline_1.weekendPulse.pulse.count,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.weekendPulse.pulse.T_start,heatingLoadCharline_2.weekendPulse.pulse.count,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,$whenCondition32,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,$whenCondition33,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled) * Number of discrete states: 42 (simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_1.weekendPulse.pulse.count,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEvent,heatingLoadCharline_2.weekendPulse.pulse.count,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEvent,temperatureHH_900s_01012012_0000_31122012_2345_2.MSL_combiTimeTable.nextTimeEventScaled,PID11.switch_OnOff.u2,PID10.switch_OnOff.u2,PID7.switch_OnOff.u2,PID6.switch_OnOff.u2,PID5.switch_OnOff.u2,PID4.switch_OnOff.u2,PID3.switch_OnOff.u2,PID2.switch_OnOff.u2,PID1.switch_OnOff.u2,PID.switch_OnOff.u2,heatingLoadCharline_2.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_2.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.OffsetvalueDailyprofile.MSL_combiTimeTable.nextTimeEventScaled,heatingLoadCharline_1.SummerDayTypicalHeatLoad.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_3.MSL_combiTimeTable.nextTimeEventScaled,temperatureHH_900s_01012012_0000_31122012_2345_1.MSL_combiTimeTable.nextTimeEventScaled,PID11.toPU.y,PID10.toPU.y,PID7.toPU.y,PID6.toPU.y,PID5.toPU.y,PID4.toPU.y,PID3.toPU.y,PID2.toPU.y,PID1.toPU.y,PID.toPU.y,heatingLoadCharline_1.hour_of_day.count,heatingLoadCharline_2.hour_of_day.count) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (1851): * Single equations (assignments): 1419 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 344 * When equations: 46 * If-equations: 0 * Equation systems (not torn): 2 * Torn equation systems: 40 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 1 system {(2,100.0%)} * Non-linear Jacobian (size): 1 system {2} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 28 systems {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 12 systems {(2,20), (2,9), (2,6), (2,6), (1,17), (1,17), (1,20), (1,8), (1,17), (1,17), (1,20), (1,8)} [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/TransiEnt/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Resources/Library/libTILMedia181ClaRa.so Notification: Performance of Backend phase and start with SimCode phase: time 0.01021/11.95, allocations: 2.96 MB / 5.84 GB, free: 371.1 MB / 2.014 GB Notification: Performance of simCode: created initialization part: time 0.7763/12.72, allocations: 231.5 MB / 6.066 GB, free: 134.8 MB / 2.014 GB Notification: Performance of simCode: created event and clocks part: time 4.892e-05/12.72, allocations: 9 kB / 6.066 GB, free: 134.8 MB / 2.014 GB Notification: Performance of simCode: created simulation system equations: time 0.05716/12.78, allocations: 39.46 MB / 6.104 GB, free: 92.83 MB / 2.014 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.06146/12.84, allocations: 7.898 MB / 6.112 GB, free: 85 MB / 2.014 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.154/13, allocations: 88.55 MB / 6.199 GB, free: 12.04 MB / 2.03 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.04116/13.04, allocations: 20.94 MB / 6.219 GB, free: 7.047 MB / 2.045 GB Notification: Performance of simCode: alias equations: time 0.04523/13.08, allocations: 12.86 MB / 6.232 GB, free: 10.47 MB / 2.061 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01265/13.09, allocations: 3.117 MB / 6.235 GB, free: 7.348 MB / 2.061 GB Notification: Performance of SimCode: time 2.414e-06/13.09, allocations: 0 / 6.235 GB, free: 7.348 MB / 2.061 GB Notification: Performance of Templates: time 1.555/14.65, allocations: 0.5181 GB / 6.753 GB, free: 230.9 MB / 2.061 GB make -j1 -f TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.makefile (rm -f TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe ; mkfifo TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe >> ../files/TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.sim & ./TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled -abortSlowSimulation -alarm=480 -lv LOG_STATS > TransiEnt_TransiEnt.Grid.Heat.HeatGridAnalysis.TwoClosedLoops_PressureControlled.pipe 2>&1)