Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_ThermofluidStream.Examples.HeatPump.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false)
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.HeatPump")
translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.HeatPump")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.00121/0.00121, allocations: 108 kB / 15.6 MB, free: 128 kB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001406/0.001406, allocations: 194.3 kB / 16.53 MB, free: 6.672 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.43/1.43, allocations: 222.9 MB / 240.2 MB, free: 4.41 MB / 190.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.7364/0.7364, allocations: 91.2 MB / 381.6 MB, free: 9.422 MB / 318.1 MB
Notification: Performance of FrontEnd - loaded program: time 0.001632/0.001632, allocations: 79.25 kB / 460.3 MB, free: 23.11 MB / 350.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.148/0.1497, allocations: 67.7 MB / 0.5156 GB, free: 10.21 MB / 398.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.HeatPump): time 1.166/1.316, allocations: 394 MB / 0.9004 GB, free: 0.5508 MB / 0.6231 GB
Notification: Performance of NFInst.instExpressions: time 0.7998/2.116, allocations: 233.2 MB / 1.128 GB, free: 276 kB / 0.7637 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter Cvs_US has annotation(Evaluate=true) and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter Cvs_UK has annotation(Evaluate=true) and no binding.
Notification: Performance of NFInst.updateImplicitVariability: time 0.007727/2.124, allocations: 125.7 kB / 1.128 GB, free: 276 kB / 0.7637 GB
Notification: Performance of NFTyping.typeComponents: time 0.008903/2.132, allocations: 2.282 MB / 1.13 GB, free: 264 kB / 0.7637 GB
Notification: Performance of NFTyping.typeBindings: time 0.03799/2.171, allocations: 8.899 MB / 1.139 GB, free: 144 kB / 0.7637 GB
Notification: Performance of NFTyping.typeClassSections: time 0.07057/2.241, allocations: 21.47 MB / 1.16 GB, free: 15.82 MB / 0.7794 GB
Notification: Performance of NFFlatten.flatten: time 0.02015/2.261, allocations: 17.12 MB / 1.177 GB, free: 15.8 MB / 0.7794 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.006801/2.268, allocations: 4.389 MB / 1.181 GB, free: 14.53 MB / 0.7794 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.04748/2.316, allocations: 25.53 MB / 1.206 GB, free: 12.3 MB / 0.7794 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01452/2.33, allocations: 6.905 MB / 1.213 GB, free: 8.078 MB / 0.7794 GB
Notification: Performance of NFPackage.collectConstants: time 0.005516/2.336, allocations: 1.158 MB / 1.214 GB, free: 6.922 MB / 0.7794 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.1623/2.498, allocations: 55.76 MB / 1.268 GB, free: 6.859 MB / 0.8262 GB
Notification: Performance of NFScalarize.scalarize: time 0.007095/2.505, allocations: 2.712 MB / 1.271 GB, free: 5.582 MB / 0.8262 GB
Notification: Performance of NFVerifyModel.verify: time 0.02134/2.527, allocations: 6.437 MB / 1.277 GB, free: 1.32 MB / 0.8262 GB
Notification: Performance of NFConvertDAE.convert: time 0.3147/2.841, allocations: 109.7 MB / 1.384 GB, free: 9.465 MB / 0.9356 GB
Notification: Performance of FrontEnd - DAE generated: time 8.235e-06/2.841, allocations: 3.938 kB / 1.384 GB, free: 9.461 MB / 0.9356 GB
Notification: Performance of FrontEnd: time 2.104e-06/2.841, allocations: 0 / 1.384 GB, free: 9.461 MB / 0.9356 GB
Notification: Performance of Transformations before backend: time 0.0007481/2.842, allocations: 4 kB / 1.384 GB, free: 9.457 MB / 0.9356 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2280
 * Number of variables: 2280
Notification: Performance of Generate backend data structure: time 0.09682/2.939, allocations: 17.99 MB / 1.402 GB, free: 7.52 MB / 0.9512 GB
Notification: Performance of prepare preOptimizeDAE: time 4.607e-05/2.939, allocations: 8.031 kB / 1.402 GB, free: 7.512 MB / 0.9512 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01449/2.954, allocations: 2.02 MB / 1.404 GB, free: 5.477 MB / 0.9512 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01658/2.97, allocations: 6.596 MB / 1.41 GB, free: 15.04 MB / 0.9669 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0009338/2.971, allocations: 0.733 MB / 1.411 GB, free: 14.29 MB / 0.9669 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.003941/2.975, allocations: 0.8449 MB / 1.412 GB, free: 13.45 MB / 0.9669 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0454/3.021, allocations: 15.36 MB / 1.427 GB, free: 13.95 MB / 0.9825 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0004647/3.021, allocations: 4 kB / 1.427 GB, free: 13.94 MB / 0.9825 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.003498/3.025, allocations: 340.8 kB / 1.427 GB, free: 13.61 MB / 0.9825 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0003202/3.025, allocations: 271.9 kB / 1.428 GB, free: 13.34 MB / 0.9825 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.05689/3.082, allocations: 17.46 MB / 1.445 GB, free: 11.86 MB / 0.9981 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.7042/3.786, allocations: 58.57 MB / 1.502 GB, free: 0.4916 GB / 1.029 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02569/3.812, allocations: 11.93 MB / 1.513 GB, free: 499.3 MB / 1.029 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01396/3.826, allocations: 8.268 MB / 1.522 GB, free: 496.3 MB / 1.029 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.02183/3.848, allocations: 43.46 MB / 1.564 GB, free: 447 MB / 1.029 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001852/3.848, allocations: 130.5 kB / 1.564 GB, free: 446.9 MB / 1.029 GB
Notification: Performance of pre-optimization done (n=1023): time 1.114e-05/3.848, allocations: 6.938 kB / 1.564 GB, free: 446.9 MB / 1.029 GB
Notification: Performance of matching and sorting (n=1031): time 0.1097/3.958, allocations: 46.44 MB / 1.609 GB, free: 423.8 MB / 1.029 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 9.51e-05/3.958, allocations: 217 kB / 1.61 GB, free: 423.6 MB / 1.029 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter controlValve.Cvs_UK has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter controlValve.Cvs_US has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.009713/3.967, allocations: 6.339 MB / 1.616 GB, free: 420.4 MB / 1.029 GB
Notification: Performance of collectPreVariables (initialization): time 0.002831/3.97, allocations: 189.2 kB / 1.616 GB, free: 420.3 MB / 1.029 GB
Notification: Performance of collectInitialEqns (initialization): time 0.002591/3.973, allocations: 3.974 MB / 1.62 GB, free: 416.8 MB / 1.029 GB
Notification: Performance of collectInitialBindings (initialization): time 0.004763/3.978, allocations: 3.429 MB / 1.623 GB, free: 413.8 MB / 1.029 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.003766/3.981, allocations: 2.133 MB / 1.625 GB, free: 412.8 MB / 1.029 GB
Notification: Performance of setup shared object (initialization): time 4.594e-05/3.982, allocations: 305 kB / 1.626 GB, free: 412.5 MB / 1.029 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01288/3.994, allocations: 7.526 MB / 1.633 GB, free: 408.2 MB / 1.029 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01446/4.009, allocations: 9.112 MB / 1.642 GB, free: 398.6 MB / 1.029 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.03187/4.041, allocations: 20.6 MB / 1.662 GB, free: 376.9 MB / 1.029 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 7.292e-05/4.041, allocations: 12 kB / 1.662 GB, free: 376.9 MB / 1.029 GB
Notification: Performance of matching and sorting (n=1280) (initialization): time 0.0452/4.086, allocations: 19.83 MB / 1.681 GB, free: 357 MB / 1.029 GB
Notification: Performance of prepare postOptimizeDAE: time 4.788e-05/4.086, allocations: 20 kB / 1.681 GB, free: 357 MB / 1.029 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001005/4.086, allocations: 41.78 kB / 1.681 GB, free: 357 MB / 1.029 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01274/4.099, allocations: 2.17 MB / 1.684 GB, free: 354.8 MB / 1.029 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01034/4.109, allocations: 2.583 MB / 1.686 GB, free: 352.2 MB / 1.029 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02694/4.136, allocations: 45.54 MB / 1.731 GB, free: 303.5 MB / 1.029 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.009869/4.146, allocations: 0.7732 MB / 1.731 GB, free: 302.7 MB / 1.029 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003958/4.15, allocations: 0.7614 MB / 1.732 GB, free: 302 MB / 1.029 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.02119/4.172, allocations: 10.34 MB / 1.742 GB, free: 291.6 MB / 1.029 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.01543/4.187, allocations: 9.079 MB / 1.751 GB, free: 282.1 MB / 1.029 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.03153/4.219, allocations: 20.53 MB / 1.771 GB, free: 260.4 MB / 1.029 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 6.167e-05/4.219, allocations: 12 kB / 1.771 GB, free: 260.4 MB / 1.029 GB
Notification: Performance of matching and sorting (n=1280) (initialization_lambda0): time 0.04077/4.259, allocations: 19.76 MB / 1.79 GB, free: 240.6 MB / 1.029 GB
Notification: Performance of prepare postOptimizeDAE: time 5.257e-05/4.26, allocations: 24 kB / 1.79 GB, free: 240.6 MB / 1.029 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001308/4.26, allocations: 44.12 kB / 1.79 GB, free: 240.6 MB / 1.029 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01308/4.273, allocations: 2.161 MB / 1.793 GB, free: 238.3 MB / 1.029 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01081/4.284, allocations: 2.578 MB / 1.795 GB, free: 235.7 MB / 1.029 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02773/4.311, allocations: 45.52 MB / 1.84 GB, free: 186.9 MB / 1.029 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.009783/4.321, allocations: 0.7725 MB / 1.84 GB, free: 186.1 MB / 1.029 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003269/4.325, allocations: 0.7614 MB / 1.841 GB, free: 185.4 MB / 1.029 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 170
 * Number of states: 0 ()
 * Number of discrete variables: 49 (accumulator.medium.phase,receiver.medium.phase,accumulator.outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,controlValve.outlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI2.I.local_reset,PI1.I.local_reset,PI.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (989):
 * Single equations (assignments): 916
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 47
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 26
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,13,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.005616/4.33, allocations: 1.026 MB / 1.842 GB, free: 184.3 MB / 1.029 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.0047/4.335, allocations: 0.8757 MB / 1.843 GB, free: 183.4 MB / 1.029 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.07122/4.406, allocations: 33.52 MB / 1.876 GB, free: 149.8 MB / 1.029 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.04383/4.45, allocations: 20.25 MB / 1.895 GB, free: 129.5 MB / 1.029 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 9.02e-05/4.45, allocations: 23.98 kB / 1.895 GB, free: 129.4 MB / 1.029 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0002816/4.45, allocations: 51.8 kB / 1.896 GB, free: 129.4 MB / 1.029 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.08297/4.533, allocations: 43.97 MB / 1.938 GB, free: 84.05 MB / 1.029 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0001652/4.534, allocations: 4 kB / 1.938 GB, free: 84.05 MB / 1.029 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01091/4.545, allocations: 2.305 MB / 1.941 GB, free: 81.74 MB / 1.029 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.006231/4.551, allocations: 2.159 MB / 1.943 GB, free: 79.5 MB / 1.029 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002943/4.554, allocations: 407.7 kB / 1.943 GB, free: 79.1 MB / 1.029 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02813/4.582, allocations: 46.72 MB / 1.989 GB, free: 28.97 MB / 1.029 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.364e-06/4.582, allocations: 240 / 1.989 GB, free: 28.97 MB / 1.029 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.4265/5.009, allocations: 31.11 MB / 2.019 GB, free: 468.9 MB / 1.029 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.00812/5.017, allocations: 2.637 MB / 2.022 GB, free: 468.8 MB / 1.029 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.003062/5.02, allocations: 210.1 kB / 2.022 GB, free: 468.8 MB / 1.029 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.008294/5.028, allocations: 0.8481 MB / 2.023 GB, free: 468.8 MB / 1.029 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001993/5.03, allocations: 0.7809 MB / 2.024 GB, free: 468.8 MB / 1.029 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001397/5.032, allocations: 0.5403 MB / 2.024 GB, free: 468.8 MB / 1.029 GB
Notification: Performance of sorting global known variables: time 0.008035/5.04, allocations: 4.316 MB / 2.028 GB, free: 468.6 MB / 1.029 GB
Notification: Performance of sort global known variables: time 6.02e-07/5.04, allocations: 0 / 2.028 GB, free: 468.6 MB / 1.029 GB
Notification: Performance of remove unused functions: time 0.05954/5.099, allocations: 8.863 MB / 2.037 GB, free: 468.5 MB / 1.029 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 3
 * Number of states: 56 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,compressor.m_flow,compressor.phi,compressor.omega,receiver.M,receiver.U_med,fan.m_flow,fan1.m_flow,accumulator.M,accumulator.U_med,accumulator.m_flow_in,heatCapacitor.T,sensorVaporQuality8.value,PI.I.y,PI1.I.y,PI2.I.y,firstOrder2.y)
 * Number of discrete variables: 117 (condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[9].outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[9].outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,accumulator.outlet.state.phase,$cse1.phase,$cse2,$cse3.phase,$cse4,$cse5.phase,$cse6,$cse7.phase,$cse8,$cse9.phase,$cse11.phase,$cse12,$cse15.phase,$cse18.phase,$cse19,$cse21.phase,$cse22,$cse24.phase,$cse25,$cse27.phase,$cse28,$cse30.phase,$cse31,$cse33.phase,$cse34,$cse37.phase,$cse38.phase,$cse39,$cse41.phase,$cse42,$cse45.phase,$cse46,$cse49.phase,$cse50,$cse53.phase,$cse54,$cse57.phase,$cse58,$cse61.phase,$cse62,$cse65.phase,$cse66,$cse69.phase,$cse70,$cse73.phase,$cse74,$cse77.phase,$cse78,$cse81.phase,$cse82,$cse85.phase,$cse86,$cse89.phase,$cse90,$cse93.phase,$cse94,$cse97.phase,$cse98,$cse101.phase,$cse102,$cse105.phase,$cse106,$cse109.phase,$cse110,$cse113.phase,$cse114,$cse117.phase,$cse118,$cse122.phase,$cse123,$cse124.phase,$cse125,$cse126.phase,$cse127,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[10].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[10].state.phase,controlValve.outlet.state.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (960):
 * Single equations (assignments): 850
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 82
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 28
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,1), (1,1), (1,3), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.2793/5.378, allocations: 50.74 MB / 2.087 GB, free: 444.1 MB / 1.029 GB
Notification: Performance of simCode: created initialization part: time 0.2188/5.597, allocations: 80.03 MB / 2.165 GB, free: 390.3 MB / 1.029 GB
Notification: Performance of simCode: created event and clocks part: time 1.722e-05/5.597, allocations: 9.312 kB / 2.165 GB, free: 390.3 MB / 1.029 GB
Notification: Performance of simCode: created simulation system equations: time 0.02606/5.623, allocations: 13.85 MB / 2.178 GB, free: 377.9 MB / 1.029 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.02718/5.651, allocations: 3.893 MB / 2.182 GB, free: 375 MB / 1.029 GB
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(compressor.outputQuantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.06838/5.719, allocations: 29.7 MB / 2.211 GB, free: 349.4 MB / 1.029 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.016/5.735, allocations: 6.91 MB / 2.218 GB, free: 344.2 MB / 1.029 GB
Notification: Performance of simCode: alias equations: time 0.03473/5.77, allocations: 16.57 MB / 2.234 GB, free: 328.8 MB / 1.029 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.007981/5.778, allocations: 1.565 MB / 2.235 GB, free: 327.2 MB / 1.029 GB
Notification: Performance of SimCode: time 9.51e-07/5.778, allocations: 0 / 2.235 GB, free: 327.2 MB / 1.029 GB
Notification: Performance of Templates: time 0.7911/6.569, allocations: 319.1 MB / 2.547 GB, free: 398.1 MB / 1.029 GB
make -j1 -f ThermofluidStream_ThermofluidStream.Examples.HeatPump.makefile
(rm -f ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe ; mkfifo ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe ; head -c 1048576 < ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe >> ../files/ThermofluidStream_ThermofluidStream.Examples.HeatPump.sim & ./ThermofluidStream_ThermofluidStream.Examples.HeatPump  -abortSlowSimulation -alarm=1200  -emit_protected -lv LOG_STATS > ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe 2>&1)
diffSimulationResults("ThermofluidStream_ThermofluidStream.Examples.HeatPump_res.mat","/mnt/ReferenceFiles/ThermofluidStream-main-regression/ReferenceData/ThermofluidStream.Examples.HeatPump_ref.mat","/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/ThermofluidStream_ThermofluidStream.Examples.HeatPump.diff",relTol=0.003,relTolDiffMinMax=0.003,rangeDelta=0.001)
Reference file matches