Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo", uses=false) Using package Buildings with version 8.1.4 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo) Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo) Running command: "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001137/0.001137, allocations: 108 kB / 15.61 MB, free: 148 kB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001114/0.001114, allocations: 193.9 kB / 16.53 MB, free: 6.664 MB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 1.137/1.137, allocations: 205.1 MB / 222.4 MB, free: 4.539 MB / 174.1 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo): time 1.531/1.531, allocations: 292.3 MB / 0.5489 GB, free: 12.81 MB / 462.1 MB Notification: Modelica requested package Complex of version 3.2.3. Complex 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Modelica requested package ModelicaServices of version 3.2.3. ModelicaServices 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Performance of FrontEnd - loaded program: time 0.001354/0.001354, allocations: 70.58 kB / 0.6716 GB, free: 26.27 MB / 0.5294 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1642/0.1656, allocations: 114.5 MB / 0.7835 GB, free: 13.37 MB / 0.6075 GB Notification: Performance of NFInst.instantiate(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase): time 3.819/3.985, allocations: 1.95 GB / 2.734 GB, free: 4.109 MB / 1.498 GB Notification: Performance of NFInst.instExpressions: time 1.604/5.589, allocations: 0.5628 GB / 3.296 GB, free: 7.047 MB / 1.654 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.08587/5.675, allocations: 2.347 MB / 3.299 GB, free: 5.559 MB / 1.654 GB Notification: Performance of NFTyping.typeComponents: time 0.07952/5.754, allocations: 29.57 MB / 3.328 GB, free: 9.617 MB / 1.686 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:216:3-259:11:writable] Warning: Pure function 'Modelica.Utilities.Strings.find' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:1211:5-1277:25:writable] Warning: Pure function 'Modelica.Utilities.Strings.Advanced.skipLineComments' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:965:3-1021:18:writable] Warning: Pure function 'Modelica.Utilities.Strings.syntaxError' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:846:3-933:20:writable] Warning: Pure function 'Modelica.Utilities.Strings.scanDelimiter' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:638:3-686:15:writable] Warning: Pure function 'Modelica.Utilities.Strings.scanReal' contains a call to impure function 'Modelica.Utilities.Strings.Advanced.scanReal'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:2:1-99:16:writable] Warning: Pure function 'Buildings.Experimental.DHC.Loads.BaseClasses.getPeakLoad' contains a call to impure function 'Modelica.Utilities.Streams.readLine'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:139:3-175:14:writable] Warning: Pure function 'Modelica.Utilities.Strings.isEmpty' contains a call to impure function 'Modelica.Utilities.Strings.Advanced.skipWhiteSpace'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getHeaderElementTMY3.mo:2:1-105:25:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3' contains a call to impure function 'Modelica.Utilities.Streams.readLine'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLongitudeTMY3.mo:2:1-48:21:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getLongitudeTMY3' contains a call to impure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLatitudeTMY3.mo:2:1-48:20:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getLatitudeTMY3' contains a call to impure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getTimeZoneTMY3.mo:2:1-47:20:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeZoneTMY3' contains a call to impure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3'. Notification: Performance of NFTyping.typeBindings: time 0.1968/5.951, allocations: 76.45 MB / 3.402 GB, free: 7.695 MB / 1.748 GB Notification: Performance of NFTyping.typeClassSections: time 0.1045/6.056, allocations: 48.35 MB / 3.449 GB, free: 11.59 MB / 1.795 GB Notification: Performance of NFFlatten.flatten: time 0.1737/6.229, allocations: 147.6 MB / 3.594 GB, free: 11.9 MB / 1.936 GB Notification: Performance of NFFlatten.resolveConnections: time 2.191/8.421, allocations: 57.85 MB / 3.65 GB, free: 21.23 MB / 1.936 GB Notification: Performance of NFEvalConstants.evaluate: time 0.1231/8.544, allocations: 59.49 MB / 3.708 GB, free: 18.52 MB / 1.936 GB Notification: Performance of NFSimplifyModel.simplify: time 0.07522/8.619, allocations: 42.56 MB / 3.75 GB, free: 10.93 MB / 1.936 GB Notification: Performance of NFPackage.collectConstants: time 0.02669/8.646, allocations: 6.834 MB / 3.756 GB, free: 10.93 MB / 1.936 GB Notification: Performance of NFFlatten.collectFunctions: time 0.08272/8.728, allocations: 29.89 MB / 3.786 GB, free: 10.93 MB / 1.936 GB Notification: Performance of NFScalarize.scalarize: time 0.02707/8.756, allocations: 16.78 MB / 3.802 GB, free: 8.68 MB / 1.936 GB Notification: Performance of NFVerifyModel.verify: time 0.06149/8.817, allocations: 34.58 MB / 3.836 GB, free: 0 / 1.936 GB Notification: Performance of NFConvertDAE.convert: time 0.1447/8.962, allocations: 105.3 MB / 3.939 GB, free: 4.43 MB / 1.951 GB Notification: Performance of FrontEnd - DAE generated: time 6.913e-06/8.962, allocations: 0 / 3.939 GB, free: 4.43 MB / 1.951 GB Notification: Performance of FrontEnd: time 1.653e-06/8.962, allocations: 0 / 3.939 GB, free: 4.43 MB / 1.951 GB Notification: Performance of Transformations before backend: time 0.002715/8.965, allocations: 0 / 3.939 GB, free: 4.43 MB / 1.951 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8753 * Number of variables: 8753 Notification: Performance of Generate backend data structure: time 0.1649/9.129, allocations: 64.66 MB / 4.002 GB, free: 3.652 MB / 1.983 GB Notification: Performance of prepare preOptimizeDAE: time 3.842e-05/9.129, allocations: 9.656 kB / 4.002 GB, free: 3.652 MB / 1.983 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01565/9.145, allocations: 4.336 MB / 4.006 GB, free: 2.59 MB / 1.983 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.08019/9.225, allocations: 14.82 MB / 4.02 GB, free: 5.34 MB / 1.998 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.1124/9.338, allocations: 53.26 MB / 4.072 GB, free: 4.824 MB / 2.029 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumChi.eff.getArrayAsString({(-20000.0) / ret2.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHotWat.eff.getArrayAsString({(-20000.0) / ret2.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHea.eff.getArrayAsString({(-20000.0) / ret2.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumChi.eff.getArrayAsString({(-20000.0) / apa2.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHotWat.eff.getArrayAsString({(-20000.0) / apa2.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHea.eff.getArrayAsString({(-20000.0) / apa2.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumChi.eff.getArrayAsString({(-20000.0) / larOff4.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff4.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHea.eff.getArrayAsString({(-20000.0) / larOff4.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumChi.eff.getArrayAsString({(-20000.0) / larOff3.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff3.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHea.eff.getArrayAsString({(-20000.0) / larOff3.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumChi.eff.getArrayAsString({(-20000.0) / apa1.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHotWat.eff.getArrayAsString({(-20000.0) / apa1.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHea.eff.getArrayAsString({(-20000.0) / apa1.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumChi.eff.getArrayAsString({(-20000.0) / larOff2.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff2.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHea.eff.getArrayAsString({(-20000.0) / larOff2.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumChi.eff.getArrayAsString({(-20000.0) / ret1.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHotWat.eff.getArrayAsString({(-20000.0) / ret1.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHea.eff.getArrayAsString({(-20000.0) / ret1.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumChi.eff.getArrayAsString({(-20000.0) / larOff1.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff1.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHea.eff.getArrayAsString({(-20000.0) / larOff1.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.01653/9.354, allocations: 6.815 MB / 4.079 GB, free: 15.08 MB / 2.045 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01201/9.366, allocations: 3.54 MB / 4.083 GB, free: 12.68 MB / 2.045 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.1222/9.489, allocations: 45.07 MB / 4.127 GB, free: 12.68 MB / 2.076 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.001009/9.49, allocations: 108.2 kB / 4.127 GB, free: 12.63 MB / 2.076 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.01083/9.5, allocations: 1.444 MB / 4.128 GB, free: 12.27 MB / 2.076 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0007089/9.501, allocations: 0.8689 MB / 4.129 GB, free: 11.41 MB / 2.076 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.1088/9.61, allocations: 38.32 MB / 4.166 GB, free: 7.977 MB / 2.108 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.3318/9.942, allocations: 223 MB / 4.384 GB, free: 2.43 MB / 2.326 GB Notification: Performance of preOpt comSubExp (simulation): time 0.1266/10.07, allocations: 38.86 MB / 4.422 GB, free: 12.12 MB / 2.373 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.4675/10.54, allocations: 13.47 MB / 4.435 GB, free: 1.49 GB / 2.373 GB Notification: Performance of preOpt evalFunc (simulation): time 0.1013/10.64, allocations: 65.79 MB / 4.499 GB, free: 1.46 GB / 2.373 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.03748/10.67, allocations: 15.17 MB / 4.514 GB, free: 1.455 GB / 2.373 GB Notification: Performance of pre-optimization done (n=1787): time 2.619e-05/10.67, allocations: 0 / 4.514 GB, free: 1.455 GB / 2.373 GB Notification: Performance of matching and sorting (n=1787): time 0.2127/10.89, allocations: 59.09 MB / 4.572 GB, free: 1.441 GB / 2.373 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002665/10.89, allocations: 1.188 MB / 4.573 GB, free: 1.44 GB / 2.373 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.08541/10.97, allocations: 45.11 MB / 4.617 GB, free: 1.424 GB / 2.373 GB Notification: Performance of collectPreVariables (initialization): time 0.004876/10.98, allocations: 0.4914 MB / 4.618 GB, free: 1.424 GB / 2.373 GB Notification: Performance of collectInitialEqns (initialization): time 0.02464/11, allocations: 27.13 MB / 4.644 GB, free: 1.406 GB / 2.373 GB Notification: Performance of collectInitialBindings (initialization): time 0.007608/11.01, allocations: 6.09 MB / 4.65 GB, free: 1.402 GB / 2.373 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.01082/11.02, allocations: 5.396 MB / 4.655 GB, free: 1.399 GB / 2.373 GB Notification: Performance of setup shared object (initialization): time 3.79e-05/11.02, allocations: 301.1 kB / 4.656 GB, free: 1.399 GB / 2.373 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.03198/11.05, allocations: 13.04 MB / 4.668 GB, free: 1.395 GB / 2.373 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.03883/11.09, allocations: 23.92 MB / 4.692 GB, free: 1.377 GB / 2.373 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.06465/11.16, allocations: 34.34 MB / 4.725 GB, free: 1.358 GB / 2.373 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0004084/11.16, allocations: 74.59 kB / 4.725 GB, free: 1.358 GB / 2.373 GB Notification: Performance of matching and sorting (n=3181) (initialization): time 0.1176/11.28, allocations: 43.22 MB / 4.768 GB, free: 1.337 GB / 2.373 GB Notification: Performance of prepare postOptimizeDAE: time 0.0003304/11.28, allocations: 119.9 kB / 4.768 GB, free: 1.337 GB / 2.373 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0004331/11.28, allocations: 256 kB / 4.768 GB, free: 1.337 GB / 2.373 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.02072/11.3, allocations: 7.22 MB / 4.775 GB, free: 1.331 GB / 2.373 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02516/11.32, allocations: 6.255 MB / 4.781 GB, free: 1.326 GB / 2.373 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02616/11.35, allocations: 21.69 MB / 4.802 GB, free: 1.306 GB / 2.373 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.04012/11.39, allocations: 4.711 MB / 4.807 GB, free: 1.302 GB / 2.373 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.004886/11.39, allocations: 1.361 MB / 4.808 GB, free: 1.301 GB / 2.373 GB Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.04755/11.44, allocations: 21.52 MB / 4.829 GB, free: 1.28 GB / 2.373 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.03519/11.48, allocations: 23.42 MB / 4.852 GB, free: 1.253 GB / 2.373 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.06174/11.54, allocations: 33.34 MB / 4.885 GB, free: 1.217 GB / 2.373 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0001725/11.54, allocations: 72 kB / 4.885 GB, free: 1.217 GB / 2.373 GB Notification: Performance of matching and sorting (n=3181) (initialization_lambda0): time 0.1069/11.64, allocations: 42.25 MB / 4.926 GB, free: 1.175 GB / 2.373 GB Notification: Performance of prepare postOptimizeDAE: time 0.0001887/11.64, allocations: 119.9 kB / 4.926 GB, free: 1.175 GB / 2.373 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0002639/11.65, allocations: 256 kB / 4.926 GB, free: 1.175 GB / 2.373 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.01954/11.66, allocations: 7.218 MB / 4.933 GB, free: 1.168 GB / 2.373 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02325/11.69, allocations: 6.201 MB / 4.939 GB, free: 1.162 GB / 2.373 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02638/11.71, allocations: 21.68 MB / 4.961 GB, free: 1.14 GB / 2.373 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.04095/11.76, allocations: 3.996 MB / 4.965 GB, free: 1.136 GB / 2.373 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.005283/11.76, allocations: 1.339 MB / 4.966 GB, free: 1.135 GB / 2.373 GB Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 1166 * Number of states: 0 () * Number of discrete variables: 51 ($PRE.ret2.loa.nextTimeEvent,$whenCondition8,$PRE.apa2.loa.nextTimeEvent,$whenCondition7,$PRE.larOff4.loa.nextTimeEvent,$whenCondition6,$PRE.larOff3.loa.nextTimeEvent,$whenCondition5,$PRE.apa1.loa.nextTimeEvent,$whenCondition4,$PRE.larOff2.loa.nextTimeEvent,$whenCondition3,$PRE.ret1.loa.nextTimeEvent,$whenCondition2,$PRE.larOff1.loa.nextTimeEvent,$whenCondition1,ETheCoo.local_reset,ETheHotWat.local_reset,ETheHea.local_reset,EEleCoo.local_reset,EEleHea.local_reset,weaDat.conTim.tNext,$PRE.weaDat.conTim.tNext,weaDat.conTimMin.tNext,$PRE.weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,$PRE.ret2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,$PRE.apa2.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,$PRE.larOff4.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,$PRE.larOff3.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,$PRE.apa1.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,$PRE.larOff2.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,$PRE.ret1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,$PRE.larOff1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEvent,$whenCondition9,$whenCondition10) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (2893): * Single equations (assignments): 2845 * Array equations: 24 * Algorithm blocks: 0 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 24 systems {(1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11)} Notification: Performance of prepare postOptimizeDAE: time 0.009295/11.77, allocations: 1.944 MB / 4.968 GB, free: 1.133 GB / 2.373 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01387/11.78, allocations: 4.653 MB / 4.972 GB, free: 1.128 GB / 2.373 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.1232/11.91, allocations: 50.27 MB / 5.021 GB, free: 1.08 GB / 2.373 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.0003804/11.91, allocations: 243.9 kB / 5.022 GB, free: 1.08 GB / 2.373 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 4.847e-05/11.91, allocations: 8 kB / 5.022 GB, free: 1.079 GB / 2.373 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.09303/12, allocations: 31.31 MB / 5.052 GB, free: 1.049 GB / 2.373 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1875/12.19, allocations: 87.63 MB / 5.138 GB, free: 0.9632 GB / 2.373 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0001507/12.19, allocations: 32.91 kB / 5.138 GB, free: 0.9631 GB / 2.373 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01855/12.21, allocations: 3.947 MB / 5.142 GB, free: 0.9593 GB / 2.373 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.01991/12.23, allocations: 6.915 MB / 5.148 GB, free: 0.9526 GB / 2.373 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.003434/12.23, allocations: 0.562 MB / 5.149 GB, free: 0.9521 GB / 2.373 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02704/12.26, allocations: 21.48 MB / 5.17 GB, free: 0.9306 GB / 2.373 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.854e-05/12.26, allocations: 46.62 kB / 5.17 GB, free: 0.9305 GB / 2.373 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1398/12.4, allocations: 58.31 MB / 5.227 GB, free: 0.873 GB / 2.373 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02171/12.42, allocations: 8.855 MB / 5.236 GB, free: 0.8643 GB / 2.373 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01362/12.43, allocations: 399.7 kB / 5.236 GB, free: 0.8639 GB / 2.373 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.03537/12.47, allocations: 2.447 MB / 5.238 GB, free: 0.8615 GB / 2.373 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.003558/12.47, allocations: 1.258 MB / 5.24 GB, free: 0.8602 GB / 2.373 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.004628/12.48, allocations: 0.9117 MB / 5.24 GB, free: 0.8594 GB / 2.373 GB Notification: Performance of sorting global known variables: time 0.05512/12.53, allocations: 30.76 MB / 5.27 GB, free: 0.8296 GB / 2.373 GB Notification: Performance of sort global known variables: time 8.12e-07/12.53, allocations: 3.844 kB / 5.271 GB, free: 0.8296 GB / 2.373 GB Notification: Performance of remove unused functions: time 0.07123/12.6, allocations: 23.58 MB / 5.294 GB, free: 0.807 GB / 2.373 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 129 * Number of states: 5 (EEleHea.y,EEleCoo.y,ETheHea.y,ETheHotWat.y,ETheCoo.y) * Number of discrete variables: 28 ($whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,larOff1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,ret2.loa.nextTimeEventScaled,weaDat.conTimMin.tNext,weaDat.conTim.tNext) * Number of discrete states: 18 (ret2.loa.nextTimeEvent,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEvent,weaDat.conTim.tNext,weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,apa2.loa.nextTimeEventScaled,larOff4.loa.nextTimeEventScaled,larOff3.loa.nextTimeEventScaled,apa1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEventScaled,ret1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEventScaled) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (1737): * Single equations (assignments): 1575 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 120 * When equations: 18 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 24 systems {(1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12)} Notification: Performance of Backend phase and start with SimCode phase: time 0.1307/12.73, allocations: 64.95 MB / 5.357 GB, free: 0.7442 GB / 2.373 GB Notification: Performance of simCode: created initialization part: time 0.3991/13.13, allocations: 70.23 MB / 5.426 GB, free: 0.6758 GB / 2.373 GB Notification: Performance of simCode: created event and clocks part: time 2.899e-05/13.13, allocations: 26.42 kB / 5.426 GB, free: 0.6758 GB / 2.373 GB Notification: Performance of simCode: created simulation system equations: time 0.03661/13.17, allocations: 14.82 MB / 5.44 GB, free: 0.6613 GB / 2.373 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.1072/13.28, allocations: 23.79 MB / 5.463 GB, free: 0.6387 GB / 2.373 GB Warning: Could not resolve URI (uri) at compile-time; copying all loaded packages into the FMU Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 1.541/14.82, allocations: 1.254 GB / 6.717 GB, free: 0.9302 GB / 2.373 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.02872/14.85, allocations: 20.89 MB / 6.737 GB, free: 0.9269 GB / 2.373 GB Notification: Performance of simCode: alias equations: time 0.05165/14.9, allocations: 11.01 MB / 6.748 GB, free: 0.9262 GB / 2.373 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0369/14.93, allocations: 25.96 MB / 6.773 GB, free: 0.9054 GB / 2.373 GB Notification: Performance of SimCode: time 7.41e-07/14.94, allocations: 0 / 6.773 GB, free: 0.9054 GB / 2.373 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 2.505/17.44, allocations: 1.281 GB / 8.054 GB, free: 1.153 GB / 2.374 GB Notification: Performance of buildModelFMU: Generate platform static: time 54.6/72.04, allocations: 8.297 kB / 8.054 GB, free: 1.153 GB / 2.374 GB (rm -f Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe ; mkfifo Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe ; head -c 1048576 < Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe >> ../files/Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.sim & /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --tempDir=temp_Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_fmu --startTime=0 --stopTime=3.1536e+07 --timeout=50 --tolerance=1e-06 Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase.fmu > Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe 2>&1)