Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo", uses=false) Using package Buildings with version 8.1.4 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo) Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo) Running command: "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3Clusters",fmuType="me",version="2.0",platforms={"static"}) "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3Clusters",fmuType="me",version="2.0",platforms={"static"}) Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001211/0.001211, allocations: 108 kB / 15.61 MB, free: 152 kB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001275/0.001275, allocations: 197.6 kB / 16.53 MB, free: 6.66 MB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 1.175/1.175, allocations: 205.1 MB / 222.4 MB, free: 4.586 MB / 174.1 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo): time 1.504/1.504, allocations: 292.3 MB / 0.5489 GB, free: 12.84 MB / 462.1 MB Notification: Modelica requested package Complex of version 3.2.3. Complex 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Modelica requested package ModelicaServices of version 3.2.3. ModelicaServices 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Performance of FrontEnd - loaded program: time 0.00129/0.00129, allocations: 70.47 kB / 0.6716 GB, free: 26.27 MB / 0.5294 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1746/0.1759, allocations: 114.6 MB / 0.7835 GB, free: 13.42 MB / 0.6075 GB Notification: Performance of NFInst.instantiate(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters): time 6.011/6.187, allocations: 2.843 GB / 3.627 GB, free: 105.5 MB / 1.936 GB Notification: Performance of NFInst.instExpressions: time 0.5671/6.754, allocations: 0.5327 GB / 4.159 GB, free: 12 MB / 1.982 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.09872/6.853, allocations: 3.002 MB / 4.162 GB, free: 10.09 MB / 1.982 GB Notification: Performance of NFTyping.typeComponents: time 0.09754/6.95, allocations: 38.18 MB / 4.2 GB, free: 6.031 MB / 2.014 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:216:3-259:11:writable] Warning: Pure function 'Modelica.Utilities.Strings.find' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:1211:5-1277:25:writable] Warning: Pure function 'Modelica.Utilities.Strings.Advanced.skipLineComments' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:965:3-1021:18:writable] Warning: Pure function 'Modelica.Utilities.Strings.syntaxError' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:846:3-933:20:writable] Warning: Pure function 'Modelica.Utilities.Strings.scanDelimiter' contains a call to impure function 'Modelica.Utilities.Strings.length'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:638:3-686:15:writable] Warning: Pure function 'Modelica.Utilities.Strings.scanReal' contains a call to impure function 'Modelica.Utilities.Strings.Advanced.scanReal'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:2:1-99:16:writable] Warning: Pure function 'Buildings.Experimental.DHC.Loads.BaseClasses.getPeakLoad' contains a call to impure function 'Modelica.Utilities.Streams.readLine'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/Utilities/Strings.mo:139:3-175:14:writable] Warning: Pure function 'Modelica.Utilities.Strings.isEmpty' contains a call to impure function 'Modelica.Utilities.Strings.Advanced.skipWhiteSpace'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getHeaderElementTMY3.mo:2:1-105:25:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3' contains a call to impure function 'Modelica.Utilities.Streams.readLine'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLongitudeTMY3.mo:2:1-48:21:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getLongitudeTMY3' contains a call to impure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLatitudeTMY3.mo:2:1-48:20:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getLatitudeTMY3' contains a call to impure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getTimeZoneTMY3.mo:2:1-47:20:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeZoneTMY3' contains a call to impure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getAbsolutePath.mo:2:1-50:20:writable] Warning: Pure function 'Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath' contains a call to impure function 'Modelica.Utilities.Files.exist'. Notification: Performance of NFTyping.typeBindings: time 0.2528/7.203, allocations: 101.2 MB / 4.298 GB, free: 14.88 MB / 2.107 GB Notification: Performance of NFTyping.typeClassSections: time 0.1272/7.331, allocations: 62.62 MB / 4.36 GB, free: 5.969 MB / 2.154 GB Notification: Performance of NFFlatten.flatten: time 2.401/9.731, allocations: 207 MB / 4.562 GB, free: 38.55 MB / 2.264 GB Notification: Performance of NFFlatten.resolveConnections: time 0.128/9.859, allocations: 81.3 MB / 4.641 GB, free: 29.79 MB / 2.264 GB Notification: Performance of NFEvalConstants.evaluate: time 0.1472/10.01, allocations: 82.13 MB / 4.721 GB, free: 24 MB / 2.264 GB Notification: Performance of NFSimplifyModel.simplify: time 0.08762/10.09, allocations: 59.16 MB / 4.779 GB, free: 13.64 MB / 2.264 GB Notification: Performance of NFPackage.collectConstants: time 0.02845/10.12, allocations: 9.03 MB / 4.788 GB, free: 13.64 MB / 2.264 GB Notification: Performance of NFFlatten.collectFunctions: time 0.09836/10.22, allocations: 39.77 MB / 4.827 GB, free: 13.64 MB / 2.264 GB Notification: Performance of NFScalarize.scalarize: time 0.03141/10.25, allocations: 22.34 MB / 4.849 GB, free: 10.63 MB / 2.264 GB Notification: Performance of NFVerifyModel.verify: time 0.1268/10.38, allocations: 51.79 MB / 4.899 GB, free: 13.55 MB / 2.279 GB Notification: Performance of NFConvertDAE.convert: time 0.1867/10.57, allocations: 139.8 MB / 5.036 GB, free: 3.316 MB / 2.358 GB Notification: Performance of FrontEnd - DAE generated: time 5.51e-06/10.57, allocations: 0 / 5.036 GB, free: 3.316 MB / 2.358 GB Notification: Performance of FrontEnd: time 1.343e-06/10.57, allocations: 0 / 5.036 GB, free: 3.316 MB / 2.358 GB Notification: Performance of Transformations before backend: time 0.003216/10.57, allocations: 0 / 5.036 GB, free: 3.316 MB / 2.358 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 11857 * Number of variables: 11857 Notification: Performance of Generate backend data structure: time 0.2178/10.79, allocations: 86.94 MB / 5.121 GB, free: 11.57 MB / 2.436 GB Notification: Performance of prepare preOptimizeDAE: time 4.097e-05/10.79, allocations: 8.031 kB / 5.121 GB, free: 11.57 MB / 2.436 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01994/10.81, allocations: 5.912 MB / 5.126 GB, free: 8.555 MB / 2.436 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.09854/10.91, allocations: 18.4 MB / 5.144 GB, free: 6.199 MB / 2.451 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.1459/11.05, allocations: 71.55 MB / 5.214 GB, free: 4.18 MB / 2.514 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret2.pumChi.eff.getArrayAsString({(-20000.0) / ret2.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret2.pumHotWat.eff.getArrayAsString({(-20000.0) / ret2.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret2.pumHea.eff.getArrayAsString({(-20000.0) / ret2.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa2.pumChi.eff.getArrayAsString({(-20000.0) / apa2.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa2.pumHotWat.eff.getArrayAsString({(-20000.0) / apa2.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa2.pumHea.eff.getArrayAsString({(-20000.0) / apa2.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff4.pumChi.eff.getArrayAsString({(-20000.0) / larOff4.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff4.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff4.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff4.pumHea.eff.getArrayAsString({(-20000.0) / larOff4.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff3.pumChi.eff.getArrayAsString({(-20000.0) / larOff3.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff3.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff3.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff3.pumHea.eff.getArrayAsString({(-20000.0) / larOff3.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa1.pumChi.eff.getArrayAsString({(-20000.0) / apa1.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa1.pumHotWat.eff.getArrayAsString({(-20000.0) / apa1.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa1.pumHea.eff.getArrayAsString({(-20000.0) / apa1.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff2.pumChi.eff.getArrayAsString({(-20000.0) / larOff2.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff2.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff2.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff2.pumHea.eff.getArrayAsString({(-20000.0) / larOff2.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret1.pumChi.eff.getArrayAsString({(-20000.0) / ret1.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret1.pumHotWat.eff.getArrayAsString({(-20000.0) / ret1.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret1.pumHea.eff.getArrayAsString({(-20000.0) / ret1.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff1.pumChi.eff.getArrayAsString({(-20000.0) / larOff1.pumChi.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff1.pumHotWat.eff.getArrayAsString({(-20000.0) / larOff1.pumHotWat.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff1.pumHea.eff.getArrayAsString({(-20000.0) / larOff1.pumHea.eff.per.pressure.V_flow[2]}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.01738/11.07, allocations: 7.738 MB / 5.222 GB, free: 12.34 MB / 2.529 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01673/11.09, allocations: 4.797 MB / 5.227 GB, free: 7.562 MB / 2.529 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.1467/11.23, allocations: 61.16 MB / 5.286 GB, free: 8.035 MB / 2.592 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.001312/11.23, allocations: 155 kB / 5.286 GB, free: 7.961 MB / 2.592 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.01084/11.24, allocations: 1.955 MB / 5.288 GB, free: 6.016 MB / 2.592 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.001329/11.25, allocations: 1.667 MB / 5.29 GB, free: 4.355 MB / 2.592 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.1346/11.38, allocations: 51.91 MB / 5.341 GB, free: 1.098 MB / 2.639 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 1.168/12.55, allocations: 322.2 MB / 5.655 GB, free: 1.644 GB / 2.748 GB Notification: Performance of preOpt comSubExp (simulation): time 0.09413/12.64, allocations: 43.43 MB / 5.698 GB, free: 1.641 GB / 2.748 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.03844/12.68, allocations: 19.18 MB / 5.716 GB, free: 1.634 GB / 2.748 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt evalFunc (simulation): time 0.1145/12.8, allocations: 81.98 MB / 5.797 GB, free: 1.57 GB / 2.748 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.03967/12.84, allocations: 20.01 MB / 5.816 GB, free: 1.559 GB / 2.748 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.01848/12.85, allocations: 2.525 MB / 5.819 GB, free: 1.559 GB / 2.748 GB Notification: Performance of pre-optimization done (n=2455): time 6.638e-05/12.85, allocations: 3.281 kB / 5.819 GB, free: 1.559 GB / 2.748 GB Notification: Performance of matching and sorting (n=2465): time 0.5718/13.43, allocations: 340.9 MB / 6.151 GB, free: 1.29 GB / 2.748 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002831/13.43, allocations: 1.377 MB / 6.153 GB, free: 1.289 GB / 2.748 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.08627/13.51, allocations: 56.78 MB / 6.208 GB, free: 1.234 GB / 2.748 GB Notification: Performance of collectPreVariables (initialization): time 0.006847/13.52, allocations: 0.6519 MB / 6.209 GB, free: 1.233 GB / 2.748 GB Notification: Performance of collectInitialEqns (initialization): time 0.03064/13.55, allocations: 36.73 MB / 6.245 GB, free: 1.197 GB / 2.748 GB Notification: Performance of collectInitialBindings (initialization): time 0.01029/13.56, allocations: 8.537 MB / 6.253 GB, free: 1.189 GB / 2.748 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.01389/13.57, allocations: 7.119 MB / 6.26 GB, free: 1.182 GB / 2.748 GB Notification: Performance of setup shared object (initialization): time 3.76e-05/13.57, allocations: 311.2 kB / 6.26 GB, free: 1.182 GB / 2.748 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.03669/13.61, allocations: 16.98 MB / 6.277 GB, free: 1.165 GB / 2.748 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.04344/13.65, allocations: 30.96 MB / 6.307 GB, free: 1.13 GB / 2.748 GB Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: pla.coo.con.vol.dynBal.medium.p = pla.coo.con.vol.dynBal.p_start (pla.sinCoo.p = pla.coo.con.vol.dynBal.p_start) Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: pla.hea.eva.vol.dynBal.medium.p = pla.hea.eva.vol.dynBal.p_start (pla.sinHea.p = pla.hea.eva.vol.dynBal.p_start) Notification: Performance of analyzeInitialSystem (initialization): time 0.3364/13.99, allocations: 125.6 MB / 6.43 GB, free: 1.004 GB / 2.748 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0002782/13.99, allocations: 96 kB / 6.43 GB, free: 1.004 GB / 2.748 GB Notification: Performance of matching and sorting (n=4316) (initialization): time 0.1205/14.11, allocations: 55 MB / 6.484 GB, free: 0.9502 GB / 2.748 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002859/14.11, allocations: 151.9 kB / 6.484 GB, free: 0.9501 GB / 2.748 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0004023/14.11, allocations: 328 kB / 6.484 GB, free: 0.9498 GB / 2.748 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.0435/14.16, allocations: 33.73 MB / 6.517 GB, free: 0.9168 GB / 2.748 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02835/14.18, allocations: 7.66 MB / 6.524 GB, free: 0.9093 GB / 2.748 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.05701/14.24, allocations: 36.49 MB / 6.56 GB, free: 0.8724 GB / 2.748 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.05083/14.29, allocations: 3.578 MB / 6.564 GB, free: 0.8689 GB / 2.748 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.006527/14.3, allocations: 1.746 MB / 6.565 GB, free: 0.8672 GB / 2.748 GB Warning: The initial conditions are over specified. The following 2 initial equations are redundant, so they are removed from the initialization system: pla.coo.con.vol.dynBal.medium.p = pla.coo.con.vol.dynBal.p_start pla.hea.eva.vol.dynBal.medium.p = pla.hea.eva.vol.dynBal.p_start. Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.06285/14.36, allocations: 29.14 MB / 6.594 GB, free: 0.8388 GB / 2.748 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.04333/14.41, allocations: 30.32 MB / 6.623 GB, free: 0.8032 GB / 2.748 GB Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: pla.coo.con.vol.dynBal.medium.p = pla.coo.con.vol.dynBal.p_start (pla.sinCoo.p = pla.coo.con.vol.dynBal.p_start) Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: pla.hea.eva.vol.dynBal.medium.p = pla.hea.eva.vol.dynBal.p_start (pla.sinHea.p = pla.hea.eva.vol.dynBal.p_start) Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.3151/14.72, allocations: 121 MB / 6.741 GB, free: 0.6806 GB / 2.748 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0002122/14.72, allocations: 96 kB / 6.742 GB, free: 0.6805 GB / 2.748 GB Notification: Performance of matching and sorting (n=4316) (initialization_lambda0): time 0.1195/14.84, allocations: 53.43 MB / 6.794 GB, free: 0.6282 GB / 2.748 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002415/14.84, allocations: 152.1 kB / 6.794 GB, free: 0.628 GB / 2.748 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.000357/14.84, allocations: 324 kB / 6.794 GB, free: 0.6277 GB / 2.748 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.03693/14.88, allocations: 31.08 MB / 6.825 GB, free: 0.5973 GB / 2.748 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02837/14.91, allocations: 7.695 MB / 6.832 GB, free: 0.5898 GB / 2.748 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.0542/14.96, allocations: 35.36 MB / 6.867 GB, free: 0.554 GB / 2.748 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.05185/15.01, allocations: 3.79 MB / 6.87 GB, free: 0.5503 GB / 2.748 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.005798/15.02, allocations: 1.706 MB / 6.872 GB, free: 0.5486 GB / 2.748 GB Warning: The initial conditions are over specified. The following 2 initial equations are redundant, so they are removed from the initialization_lambda0 system: pla.coo.con.vol.dynBal.medium.p = pla.coo.con.vol.dynBal.p_start pla.hea.eva.vol.dynBal.medium.p = pla.hea.eva.vol.dynBal.p_start. Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 1494 * Number of states: 0 () * Number of discrete variables: 56 ($PRE.watTem.nextTimeEvent,$whenCondition11,$PRE.ret2.loa.nextTimeEvent,$whenCondition8,$PRE.apa2.loa.nextTimeEvent,$whenCondition7,$PRE.larOff4.loa.nextTimeEvent,$whenCondition6,$PRE.larOff3.loa.nextTimeEvent,$whenCondition5,$PRE.apa1.loa.nextTimeEvent,$whenCondition4,$PRE.larOff2.loa.nextTimeEvent,$whenCondition3,$PRE.ret1.loa.nextTimeEvent,$whenCondition2,$PRE.larOff1.loa.nextTimeEvent,$whenCondition1,ETheCoo.local_reset,ETheHotWat.local_reset,ETheHea.local_reset,EEleCoo.local_reset,EEleHea.local_reset,watTem.nextTimeEventScaled,$PRE.watTem.nextTimeEventScaled,watTem.nextTimeEvent,weaDat.conTim.tNext,$PRE.weaDat.conTim.tNext,weaDat.conTimMin.tNext,$PRE.weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,$PRE.ret2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,$PRE.apa2.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,$PRE.larOff4.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,$PRE.larOff3.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,$PRE.apa1.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,$PRE.larOff2.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,$PRE.ret1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,$PRE.larOff1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEvent,$whenCondition9,$whenCondition10) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (3804): * Single equations (assignments): 3768 * Array equations: 26 * Algorithm blocks: 0 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 10 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 6 systems {(1,6,100.0%), (1,6,100.0%), (1,6,100.0%), (1,6,100.0%), (1,6,100.0%), (1,6,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 4 systems {(1,4), (1,4), (2,22), (27,393)} Notification: Performance of prepare postOptimizeDAE: time 0.01105/15.03, allocations: 2.506 MB / 6.874 GB, free: 0.5462 GB / 2.748 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01689/15.05, allocations: 5.899 MB / 6.88 GB, free: 0.5403 GB / 2.748 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.1163/15.16, allocations: 60.18 MB / 6.939 GB, free: 493.4 MB / 2.748 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.0002222/15.16, allocations: 303.9 kB / 6.939 GB, free: 493.1 MB / 2.748 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 4.24e-05/15.16, allocations: 12 kB / 6.939 GB, free: 493.1 MB / 2.748 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.07884/15.24, allocations: 35.89 MB / 6.974 GB, free: 457 MB / 2.748 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.2056/15.45, allocations: 108.7 MB / 7.08 GB, free: 348.4 MB / 2.748 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 6.884e-05/15.45, allocations: 28 kB / 7.081 GB, free: 348.3 MB / 2.748 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.02027/15.47, allocations: 4.997 MB / 7.085 GB, free: 343.3 MB / 2.748 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.02865/15.5, allocations: 12.23 MB / 7.097 GB, free: 331.1 MB / 2.748 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002425/15.5, allocations: 0.7377 MB / 7.098 GB, free: 330.3 MB / 2.748 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.04115/15.54, allocations: 29.39 MB / 7.127 GB, free: 299.8 MB / 2.748 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.642e-05/15.54, allocations: 43.88 kB / 7.127 GB, free: 299.8 MB / 2.748 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1394/15.68, allocations: 70.8 MB / 7.196 GB, free: 228.1 MB / 2.748 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02647/15.71, allocations: 10.91 MB / 7.207 GB, free: 217 MB / 2.748 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01458/15.72, allocations: 0.5231 MB / 7.207 GB, free: 216.5 MB / 2.748 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.04219/15.76, allocations: 3.087 MB / 7.21 GB, free: 213.4 MB / 2.748 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.003297/15.77, allocations: 1.633 MB / 7.212 GB, free: 211.8 MB / 2.748 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.004043/15.77, allocations: 1.218 MB / 7.213 GB, free: 210.6 MB / 2.748 GB Notification: Performance of sorting global known variables: time 0.0677/15.84, allocations: 38.73 MB / 7.251 GB, free: 172.2 MB / 2.748 GB Notification: Performance of sort global known variables: time 1.493e-06/15.84, allocations: 4 kB / 7.251 GB, free: 172.2 MB / 2.748 GB Notification: Performance of remove unused functions: time 0.0924/15.93, allocations: 27.71 MB / 7.278 GB, free: 145.1 MB / 2.748 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 127 * Number of states: 61 (larOff1.del_a.dynBal.U,larOff1.del_b.dynBal.U,ret1.del_a.dynBal.U,ret1.del_b.dynBal.U,larOff2.del_a.dynBal.U,larOff2.del_b.dynBal.U,apa1.del_a.dynBal.U,apa1.del_b.dynBal.U,larOff3.del_a.dynBal.U,larOff3.del_b.dynBal.U,larOff4.del_a.dynBal.U,larOff4.del_b.dynBal.U,apa2.del_a.dynBal.U,apa2.del_b.dynBal.U,ret2.del_a.dynBal.U,ret2.del_b.dynBal.U,EEleHea.y,EEleCoo.y,ETheHea.y,ETheHotWat.y,ETheCoo.y,pla.coo.con.vol.dynBal.U,pla.coo.con.vol.dynBal.mXi[1],pla.coo.eva.outCon.T,pla.hea.con.outCon.T,pla.hea.eva.vol.dynBal.U,pla.hea.eva.vol.dynBal.mXi[1],bayWatHex.valCoo.vol.dynBal.U,bayWatHex.valHea.vol.dynBal.U,pip.vol[1].dynBal.U,pip.vol[2].dynBal.U,pip.vol[3].dynBal.U,pip1.vol[1].dynBal.U,pip1.vol[2].dynBal.U,pip1.vol[3].dynBal.U,pip2.vol[1].dynBal.U,pip2.vol[2].dynBal.U,pip2.vol[3].dynBal.U,pip3.vol[1].dynBal.U,pip3.vol[2].dynBal.U,pip3.vol[3].dynBal.U,pip4.vol[1].dynBal.U,pip4.vol[2].dynBal.U,pip4.vol[3].dynBal.U,pip5.vol[1].dynBal.U,pip5.vol[2].dynBal.U,pip5.vol[3].dynBal.U,splSup1.vol.dynBal.U,splRet1.vol.dynBal.U,splSup2.vol.dynBal.U,splRet2.vol.dynBal.U,splSup3.vol.dynBal.U,splRet3.vol.dynBal.U,splSup5.vol.dynBal.U,splRet5.vol.dynBal.U,splSup6.vol.dynBal.U,splRet6.vol.dynBal.U,splSup4.vol.dynBal.U,splRet4.vol.dynBal.U,splSup7.vol.dynBal.U,splRet7.vol.dynBal.U) * Number of discrete variables: 31 ($whenCondition11,$whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,larOff1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,ret2.loa.nextTimeEventScaled,weaDat.conTimMin.tNext,weaDat.conTim.tNext,watTem.nextTimeEvent,watTem.nextTimeEventScaled) * Number of discrete states: 20 (watTem.nextTimeEvent,ret2.loa.nextTimeEvent,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEvent,weaDat.conTim.tNext,weaDat.conTimMin.tNext,watTem.nextTimeEventScaled,ret2.loa.nextTimeEventScaled,apa2.loa.nextTimeEventScaled,larOff4.loa.nextTimeEventScaled,larOff3.loa.nextTimeEventScaled,apa1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEventScaled,ret1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEventScaled) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (2216): * Single equations (assignments): 2078 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 109 * When equations: 20 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 9 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 6 systems {(1,6,100.0%), (1,6,100.0%), (1,6,100.0%), (1,6,100.0%), (1,6,100.0%), (1,6,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 3 systems {(1,4), (1,4), (27,417)} Notification: Performance of Backend phase and start with SimCode phase: time 0.1606/16.09, allocations: 82.89 MB / 7.359 GB, free: 62.72 MB / 2.748 GB Notification: Performance of simCode: created initialization part: time 1.131/17.22, allocations: 133.6 MB / 7.489 GB, free: 1.793 GB / 2.748 GB Notification: Performance of simCode: created event and clocks part: time 3.456e-05/17.22, allocations: 32.52 kB / 7.489 GB, free: 1.793 GB / 2.748 GB Notification: Performance of simCode: created simulation system equations: time 0.04267/17.26, allocations: 20.13 MB / 7.509 GB, free: 1.792 GB / 2.748 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.1294/17.39, allocations: 30.56 MB / 7.539 GB, free: 1.789 GB / 2.748 GB Warning: Could not resolve URI (uri) at compile-time; copying all loaded packages into the FMU Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 2.367/19.76, allocations: 1.951 GB / 9.489 GB, free: 1.57 GB / 2.749 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.04469/19.81, allocations: 29.39 MB / 9.518 GB, free: 1.567 GB / 2.749 GB Notification: Performance of simCode: alias equations: time 0.06528/19.87, allocations: 14.94 MB / 9.533 GB, free: 1.566 GB / 2.749 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.04847/19.92, allocations: 35.51 MB / 9.567 GB, free: 1.549 GB / 2.749 GB Notification: Performance of SimCode: time 9.11e-07/19.92, allocations: 0 / 9.567 GB, free: 1.549 GB / 2.749 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 25.08/45, allocations: 1.66 GB / 11.23 GB, free: 1.709 GB / 2.749 GB Notification: Performance of buildModelFMU: Generate platform static: time 64.02/109, allocations: 5.516 kB / 11.23 GB, free: 1.709 GB / 2.749 GB (rm -f Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.pipe ; mkfifo Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.pipe ; head -c 1048576 < Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.pipe >> ../files/Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.sim & /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --tempDir=temp_Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3Clusters_fmu --startTime=0 --stopTime=3.1536e+07 --timeout=50 --tolerance=1e-06 Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3Clusters.fmu > Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.pipe 2>&1)