Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_ThermofluidStream.Examples.HeatPump.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false)
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.HeatPump")
translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.HeatPump")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001604/0.001604, allocations: 115.3 kB / 15.34 MB, free: 0.5156 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001895/0.001895, allocations: 188.8 kB / 16.25 MB, free: 6.586 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.488/1.488, allocations: 222.9 MB / 239.9 MB, free: 4.5 MB / 190.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.7478/0.7478, allocations: 91.19 MB / 381.3 MB, free: 9.504 MB / 318.1 MB
Notification: Performance of FrontEnd - loaded program: time 0.001428/0.001428, allocations: 82.09 kB / 459.8 MB, free: 23.25 MB / 350.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1286/0.1301, allocations: 67.69 MB / 0.5151 GB, free: 10.51 MB / 398.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.HeatPump): time 1.099/1.229, allocations: 392.2 MB / 0.8981 GB, free: 476 kB / 0.6231 GB
Notification: Performance of NFInst.instExpressions: time 0.7684/1.998, allocations: 232.1 MB / 1.125 GB, free: 288 kB / 0.7637 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter Cvs_US has annotation(Evaluate=true) and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter Cvs_UK has annotation(Evaluate=true) and no binding.
Notification: Performance of NFInst.updateImplicitVariability: time 0.007934/2.006, allocations: 153.5 kB / 1.125 GB, free: 288 kB / 0.7637 GB
Notification: Performance of NFTyping.typeComponents: time 0.007904/2.014, allocations: 2.026 MB / 1.127 GB, free: 276 kB / 0.7637 GB
Notification: Performance of NFTyping.typeBindings: time 0.03503/2.049, allocations: 7.962 MB / 1.135 GB, free: 152 kB / 0.7637 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0694/2.118, allocations: 19.26 MB / 1.154 GB, free: 15.7 MB / 0.7794 GB
Notification: Performance of NFFlatten.flatten: time 0.02147/2.14, allocations: 17.17 MB / 1.17 GB, free: 15.68 MB / 0.7794 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.008341/2.148, allocations: 4.398 MB / 1.175 GB, free: 14.41 MB / 0.7794 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.05883/2.207, allocations: 30.98 MB / 1.205 GB, free: 10.1 MB / 0.7794 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01657/2.224, allocations: 6.938 MB / 1.212 GB, free: 5.086 MB / 0.7794 GB
Notification: Performance of NFPackage.collectConstants: time 0.006324/2.23, allocations: 1.16 MB / 1.213 GB, free: 3.926 MB / 0.7794 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.3069/2.537, allocations: 228.3 MB / 1.436 GB, free: 6.848 MB / 0.9981 GB
Notification: Performance of NFScalarize.scalarize: time 0.006766/2.544, allocations: 2.715 MB / 1.438 GB, free: 5.562 MB / 0.9981 GB
Notification: Performance of NFVerifyModel.verify: time 0.01736/2.561, allocations: 6.445 MB / 1.445 GB, free: 1.293 MB / 0.9981 GB
Notification: Performance of NFConvertDAE.convert: time 1.41/3.971, allocations: 191.5 MB / 1.632 GB, free: 154.6 MB / 1.029 GB
Notification: Performance of FrontEnd - DAE generated: time 1.009e-05/3.971, allocations: 0 / 1.632 GB, free: 154.6 MB / 1.029 GB
Notification: Performance of FrontEnd: time 3.296e-06/3.971, allocations: 0 / 1.632 GB, free: 154.6 MB / 1.029 GB
Notification: Performance of Transformations before backend: time 0.0007101/3.972, allocations: 0.5469 kB / 1.632 GB, free: 154.6 MB / 1.029 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2280
 * Number of variables: 2280
Notification: Performance of Generate backend data structure: time 0.09821/4.07, allocations: 17.99 MB / 1.649 GB, free: 138.8 MB / 1.029 GB
Notification: Performance of prepare preOptimizeDAE: time 4.334e-05/4.07, allocations: 12.03 kB / 1.649 GB, free: 138.7 MB / 1.029 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01305/4.083, allocations: 2.012 MB / 1.651 GB, free: 136.9 MB / 1.029 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01444/4.098, allocations: 6.604 MB / 1.658 GB, free: 132 MB / 1.029 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.000797/4.098, allocations: 0.7315 MB / 1.658 GB, free: 131.6 MB / 1.029 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.00457/4.103, allocations: 0.8403 MB / 1.659 GB, free: 131 MB / 1.029 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.04272/4.146, allocations: 15.36 MB / 1.674 GB, free: 120.2 MB / 1.029 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0002606/4.146, allocations: 0.9375 kB / 1.674 GB, free: 120.2 MB / 1.029 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.00312/4.149, allocations: 341.2 kB / 1.675 GB, free: 120.1 MB / 1.029 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.000213/4.149, allocations: 275.5 kB / 1.675 GB, free: 119.9 MB / 1.029 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.03824/4.188, allocations: 17.46 MB / 1.692 GB, free: 107.8 MB / 1.029 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.1008/4.289, allocations: 58.43 MB / 1.749 GB, free: 57.12 MB / 1.029 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02637/4.315, allocations: 11.93 MB / 1.761 GB, free: 45.2 MB / 1.029 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01577/4.331, allocations: 8.267 MB / 1.769 GB, free: 36.92 MB / 1.029 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.02753/4.358, allocations: 43.46 MB / 1.811 GB, free: 15.97 MB / 1.061 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.000274/4.359, allocations: 134.8 kB / 1.811 GB, free: 15.83 MB / 1.061 GB
Notification: Performance of pre-optimization done (n=1023): time 3.414e-05/4.359, allocations: 3 kB / 1.811 GB, free: 15.83 MB / 1.061 GB
Notification: Performance of matching and sorting (n=1031): time 0.4992/4.858, allocations: 46.43 MB / 1.857 GB, free: 0.54 GB / 1.076 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001019/4.858, allocations: 218.3 kB / 1.857 GB, free: 0.5399 GB / 1.076 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter controlValve.Cvs_UK has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter controlValve.Cvs_US has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01314/4.871, allocations: 6.338 MB / 1.863 GB, free: 0.5395 GB / 1.076 GB
Notification: Performance of collectPreVariables (initialization): time 0.00312/4.874, allocations: 179.7 kB / 1.863 GB, free: 0.5394 GB / 1.076 GB
Notification: Performance of collectInitialEqns (initialization): time 0.003439/4.878, allocations: 3.985 MB / 1.867 GB, free: 0.5375 GB / 1.076 GB
Notification: Performance of collectInitialBindings (initialization): time 0.004752/4.883, allocations: 3.431 MB / 1.87 GB, free: 0.5349 GB / 1.076 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.007293/4.89, allocations: 2.128 MB / 1.873 GB, free: 0.5342 GB / 1.076 GB
Notification: Performance of setup shared object (initialization): time 4.847e-05/4.89, allocations: 305.1 kB / 1.873 GB, free: 0.5339 GB / 1.076 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01518/4.905, allocations: 7.525 MB / 1.88 GB, free: 0.5314 GB / 1.076 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01711/4.922, allocations: 9.113 MB / 1.889 GB, free: 0.5273 GB / 1.076 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.03635/4.959, allocations: 20.6 MB / 1.909 GB, free: 0.5163 GB / 1.076 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 9.363e-05/4.959, allocations: 15.91 kB / 1.909 GB, free: 0.5163 GB / 1.076 GB
Notification: Performance of matching and sorting (n=1280) (initialization): time 0.05234/5.011, allocations: 19.84 MB / 1.929 GB, free: 0.5064 GB / 1.076 GB
Notification: Performance of prepare postOptimizeDAE: time 6.47e-05/5.011, allocations: 22.84 kB / 1.929 GB, free: 0.5064 GB / 1.076 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001132/5.011, allocations: 45.5 kB / 1.929 GB, free: 0.5064 GB / 1.076 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01365/5.025, allocations: 2.17 MB / 1.931 GB, free: 0.5053 GB / 1.076 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01074/5.036, allocations: 2.585 MB / 1.933 GB, free: 0.5045 GB / 1.076 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02785/5.064, allocations: 45.53 MB / 1.978 GB, free: 473.8 MB / 1.076 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01076/5.074, allocations: 1.011 MB / 1.979 GB, free: 472.8 MB / 1.076 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003136/5.078, allocations: 0.7575 MB / 1.979 GB, free: 472.1 MB / 1.076 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.02163/5.099, allocations: 10.34 MB / 1.99 GB, free: 461.7 MB / 1.076 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.01684/5.116, allocations: 9.07 MB / 1.998 GB, free: 452.1 MB / 1.076 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.03574/5.152, allocations: 20.53 MB / 2.018 GB, free: 430.5 MB / 1.076 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 6.127e-05/5.152, allocations: 11.94 kB / 2.018 GB, free: 430.5 MB / 1.076 GB
Notification: Performance of matching and sorting (n=1280) (initialization_lambda0): time 0.05059/5.203, allocations: 19.76 MB / 2.038 GB, free: 410.7 MB / 1.076 GB
Notification: Performance of prepare postOptimizeDAE: time 5.066e-05/5.203, allocations: 23.03 kB / 2.038 GB, free: 410.7 MB / 1.076 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.947e-05/5.203, allocations: 40 kB / 2.038 GB, free: 410.7 MB / 1.076 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01387/5.217, allocations: 2.171 MB / 2.04 GB, free: 408.5 MB / 1.076 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01075/5.227, allocations: 2.569 MB / 2.042 GB, free: 405.9 MB / 1.076 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02915/5.257, allocations: 45.52 MB / 2.087 GB, free: 357.2 MB / 1.076 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01235/5.269, allocations: 1.009 MB / 2.088 GB, free: 356.2 MB / 1.076 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003423/5.272, allocations: 0.7575 MB / 2.089 GB, free: 355.4 MB / 1.076 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 170
 * Number of states: 0 ()
 * Number of discrete variables: 49 (accumulator.medium.phase,receiver.medium.phase,accumulator.outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,controlValve.outlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI2.I.local_reset,PI1.I.local_reset,PI.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (989):
 * Single equations (assignments): 916
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 47
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 26
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,13,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.006251/5.279, allocations: 1.015 MB / 2.09 GB, free: 354.4 MB / 1.076 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.005079/5.284, allocations: 0.8796 MB / 2.09 GB, free: 353.5 MB / 1.076 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.06606/5.35, allocations: 33.52 MB / 2.123 GB, free: 319.9 MB / 1.076 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.04183/5.392, allocations: 20.26 MB / 2.143 GB, free: 299.6 MB / 1.076 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001069/5.392, allocations: 23.94 kB / 2.143 GB, free: 299.6 MB / 1.076 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.000299/5.392, allocations: 51.8 kB / 2.143 GB, free: 299.5 MB / 1.076 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.07891/5.471, allocations: 43.94 MB / 2.186 GB, free: 254.2 MB / 1.076 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 9.372e-05/5.471, allocations: 4 kB / 2.186 GB, free: 254.2 MB / 1.076 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01041/5.482, allocations: 2.305 MB / 2.188 GB, free: 251.9 MB / 1.076 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.006284/5.488, allocations: 2.158 MB / 2.19 GB, free: 249.7 MB / 1.076 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.00279/5.491, allocations: 403.7 kB / 2.191 GB, free: 249.3 MB / 1.076 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02863/5.519, allocations: 46.71 MB / 2.236 GB, free: 199.2 MB / 1.076 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.615e-06/5.52, allocations: 3.938 kB / 2.236 GB, free: 199.2 MB / 1.076 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.06335/5.583, allocations: 31.12 MB / 2.267 GB, free: 167.9 MB / 1.076 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.008475/5.591, allocations: 2.63 MB / 2.269 GB, free: 165.2 MB / 1.076 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.005118/5.597, allocations: 212 kB / 2.27 GB, free: 165 MB / 1.076 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.01101/5.608, allocations: 1.272 MB / 2.271 GB, free: 163.8 MB / 1.076 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.003082/5.611, allocations: 0.7804 MB / 2.272 GB, free: 163 MB / 1.076 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.002526/5.613, allocations: 0.5388 MB / 2.272 GB, free: 162.4 MB / 1.076 GB
Notification: Performance of sorting global known variables: time 0.007861/5.621, allocations: 4.321 MB / 2.276 GB, free: 158.1 MB / 1.076 GB
Notification: Performance of sort global known variables: time 3.91e-07/5.621, allocations: 4 kB / 2.276 GB, free: 158.1 MB / 1.076 GB
Notification: Performance of remove unused functions: time 0.06696/5.688, allocations: 8.91 MB / 2.285 GB, free: 149.9 MB / 1.076 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 3
 * Number of states: 56 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,compressor.m_flow,compressor.phi,compressor.omega,receiver.M,receiver.U_med,fan.m_flow,fan1.m_flow,accumulator.M,accumulator.U_med,accumulator.m_flow_in,heatCapacitor.T,sensorVaporQuality8.value,PI.I.y,PI1.I.y,PI2.I.y,firstOrder2.y)
 * Number of discrete variables: 117 (condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[9].outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[9].outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,accumulator.outlet.state.phase,$cse1.phase,$cse2,$cse3.phase,$cse4,$cse5.phase,$cse6,$cse7.phase,$cse8,$cse9.phase,$cse11.phase,$cse12,$cse15.phase,$cse18.phase,$cse19,$cse21.phase,$cse22,$cse24.phase,$cse25,$cse27.phase,$cse28,$cse30.phase,$cse31,$cse33.phase,$cse34,$cse37.phase,$cse38.phase,$cse39,$cse41.phase,$cse42,$cse45.phase,$cse46,$cse49.phase,$cse50,$cse53.phase,$cse54,$cse57.phase,$cse58,$cse61.phase,$cse62,$cse65.phase,$cse66,$cse69.phase,$cse70,$cse73.phase,$cse74,$cse77.phase,$cse78,$cse81.phase,$cse82,$cse85.phase,$cse86,$cse89.phase,$cse90,$cse93.phase,$cse94,$cse97.phase,$cse98,$cse101.phase,$cse102,$cse105.phase,$cse106,$cse109.phase,$cse110,$cse113.phase,$cse114,$cse117.phase,$cse118,$cse122.phase,$cse123,$cse124.phase,$cse125,$cse126.phase,$cse127,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[10].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[10].state.phase,controlValve.outlet.state.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (960):
 * Single equations (assignments): 850
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 82
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 28
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,1), (1,1), (1,3), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.295/5.983, allocations: 50.75 MB / 2.335 GB, free: 100.4 MB / 1.076 GB
Notification: Performance of simCode: created initialization part: time 0.2744/6.258, allocations: 80.01 MB / 2.413 GB, free: 19.84 MB / 1.076 GB
Notification: Performance of simCode: created event and clocks part: time 1.191e-05/6.258, allocations: 6.562 kB / 2.413 GB, free: 19.84 MB / 1.076 GB
Notification: Performance of simCode: created simulation system equations: time 0.02301/6.281, allocations: 13.84 MB / 2.426 GB, free: 5.492 MB / 1.076 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0216/6.302, allocations: 3.893 MB / 2.43 GB, free: 1.777 MB / 1.076 GB
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(compressor.outputQuantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.4013/6.704, allocations: 34.4 MB / 2.464 GB, free: 490.3 MB / 1.076 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.009345/6.713, allocations: 6.904 MB / 2.47 GB, free: 489.1 MB / 1.076 GB
Notification: Performance of simCode: alias equations: time 0.03691/6.75, allocations: 16.58 MB / 2.487 GB, free: 487.6 MB / 1.076 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.007533/6.757, allocations: 1.562 MB / 2.488 GB, free: 487.5 MB / 1.076 GB
Notification: Performance of SimCode: time 7.71e-07/6.757, allocations: 0 / 2.488 GB, free: 487.5 MB / 1.076 GB
Notification: Performance of Templates: time 0.3807/7.138, allocations: 319.3 MB / 2.8 GB, free: 211 MB / 1.076 GB
make -j1 -f ThermofluidStream_ThermofluidStream.Examples.HeatPump.makefile
(rm -f ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe ; mkfifo ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe ; head -c 1048576 < ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe >> ../files/ThermofluidStream_ThermofluidStream.Examples.HeatPump.sim & ./ThermofluidStream_ThermofluidStream.Examples.HeatPump  -abortSlowSimulation -alarm=1200  -emit_protected -lv LOG_STATS > ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe 2>&1)
diffSimulationResults("ThermofluidStream_ThermofluidStream.Examples.HeatPump_res.mat","/mnt/ReferenceFiles/ThermofluidStream-main-regression/ReferenceData/ThermofluidStream.Examples.HeatPump_ref.mat","/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/ThermofluidStream_ThermofluidStream.Examples.HeatPump.diff",relTol=0.003,relTolDiffMinMax=0.003,rangeDelta=0.001)
Reference file matches