Environment - simulationEnvironment:
startTime=1.728e+06
stopTime=1.8144e+06
tolerance=1e-06
numberOfIntervals=2500
stepSize=34.56
Regular simulation: ./Buildings_latest_Buildings.DHC.Loads.Steam.Examples.BuildingTimeSeriesAtETS  -abortSlowSimulation -alarm=480  -emit_protected -lv LOG_STATS
assert            | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.1-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 1728000.000000
|                 | |       | ((not (bui.pumCNR.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or bui.pumCNR.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in BuildingTimeSeriesAtETS.bui.pumCNR: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
assert            | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.1-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 1728000.000000
|                 | |       | ((bui.pumCNR.per.haveWMot_nominal or not (bui.pumCNR.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or bui.pumCNR.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in BuildingTimeSeriesAtETS.bui.pumCNR: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
assert            | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.1-master/Media/Steam.mo:26:5-26:42:writable]
|                 | |       | The following assertion has been violated at time 1728000.000000
|                 | |       | ((bui.sta_a.T >= 1.0 and bui.sta_a.T <= 10000.0)) --> "Variable violating min/max constraint: 1.0 <= bui.sta_a.T <= 10000.0, has value: -245.389"
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |   0.00874571s          reading init.xml
|                 | |       | | |  0.000828173s          reading info.xml
|                 | |       | | |  0.000550533s [  0.0%] pre-initialization
|                 | |       | | |   0.00335207s [  0.1%] initialization
|                 | |       | | |   0.00102218s [  0.0%] steps
|                 | |       | | |   0.00490861s [  0.1%] solver (excl. callbacks)
|                 | |       | | |   0.00473485s [  0.1%] creating output-file
|                 | |       | | |    0.0177695s [  0.4%] event-handling
|                 | |       | | |    0.0334382s [  0.7%] overhead
|                 | |       | | |      4.91253s [ 98.7%] simulation
|                 | |       | | |      4.97831s [100.0%] total
|                 | |       | | events
|                 | |       | | |     0 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | |   258 steps taken
|                 | |       | | |   406 calls of functionODE
|                 | |       | | |    80 evaluations of jacobian
|                 | |       | | |    25 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 0.000499713s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.