Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries/ --ompython_omhome=/usr Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo", uses=false) Using package Buildings with version 8.1.4 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo) Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo) Running command: "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001132/0.001132, allocations: 115.3 kB / 15.34 MB, free: 0.5156 MB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.00109/0.00109, allocations: 192.2 kB / 16.25 MB, free: 6.625 MB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 1.133/1.133, allocations: 205.1 MB / 222.1 MB, free: 4.707 MB / 174.1 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo): time 1.468/1.468, allocations: 292.3 MB / 0.5486 GB, free: 13.61 MB / 462.1 MB Notification: Modelica requested package Complex of version 3.2.3. Complex 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Modelica requested package ModelicaServices of version 3.2.3. ModelicaServices 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Performance of FrontEnd - loaded program: time 0.001234/0.001234, allocations: 67.25 kB / 0.6711 GB, free: 26.32 MB / 0.5294 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1607/0.162, allocations: 114.5 MB / 0.783 GB, free: 13.8 MB / 0.6075 GB Notification: Performance of NFInst.instantiate(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase): time 3.527/3.689, allocations: 1.931 GB / 2.714 GB, free: 14.84 MB / 1.467 GB Notification: Performance of NFInst.instExpressions: time 1.79/5.479, allocations: 0.5572 GB / 3.271 GB, free: 1.676 MB / 1.639 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.1021/5.581, allocations: 2.149 MB / 3.274 GB, free: 1.676 MB / 1.639 GB Notification: Performance of NFTyping.typeComponents: time 0.08741/5.668, allocations: 25.58 MB / 3.299 GB, free: 14.71 MB / 1.67 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:2:1-99:16:writable] Warning: Pure function ‘Buildings.Experimental.DHC.Loads.BaseClasses.getPeakLoad‘ contains a call to impure function ‘Modelica.Utilities.Streams.readLine‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getHeaderElementTMY3.mo:2:1-105:25:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘ contains a call to impure function ‘Modelica.Utilities.Streams.readLine‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLongitudeTMY3.mo:2:1-48:21:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getLongitudeTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLatitudeTMY3.mo:2:1-48:20:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getLatitudeTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getTimeZoneTMY3.mo:2:1-47:20:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeZoneTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. Notification: Performance of NFTyping.typeBindings: time 0.2312/5.9, allocations: 71.41 MB / 3.368 GB, free: 5.172 MB / 1.717 GB Notification: Performance of NFTyping.typeClassSections: time 0.118/6.018, allocations: 45.28 MB / 3.413 GB, free: 12.16 MB / 1.764 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:34:5-36:23:writable] Error: Failed to evaluate function: Modelica.Utilities.Streams.readLine. Notification: Performance of NFFlatten.flatten: time 0.2044/6.222, allocations: 148.5 MB / 3.558 GB, free: 11.6 MB / 1.904 GB Notification: Performance of NFFlatten.resolveConnections: time 0.119/6.341, allocations: 57.73 MB / 3.614 GB, free: 2.531 MB / 1.951 GB Notification: Performance of NFEvalConstants.evaluate: time 2.093/8.434, allocations: 60.23 MB / 3.673 GB, free: 76.02 MB / 1.967 GB Notification: Performance of NFSimplifyModel.simplify: time 0.06984/8.504, allocations: 44.35 MB / 3.716 GB, free: 71.73 MB / 1.967 GB Notification: Performance of NFPackage.collectConstants: time 0.02576/8.53, allocations: 6.924 MB / 3.723 GB, free: 71.73 MB / 1.967 GB Notification: Performance of NFFlatten.collectFunctions: time 0.07954/8.609, allocations: 30.45 MB / 3.753 GB, free: 71.73 MB / 1.967 GB Notification: Performance of NFScalarize.scalarize: time 0.03314/8.643, allocations: 16.93 MB / 3.769 GB, free: 69.49 MB / 1.967 GB Notification: Performance of NFVerifyModel.verify: time 0.06588/8.708, allocations: 34.75 MB / 3.803 GB, free: 60.52 MB / 1.967 GB Notification: Performance of NFConvertDAE.convert: time 0.1395/8.848, allocations: 106.5 MB / 3.907 GB, free: 49.83 MB / 1.967 GB Notification: Performance of FrontEnd - DAE generated: time 4.739e-06/8.848, allocations: 0.9062 kB / 3.907 GB, free: 49.83 MB / 1.967 GB Notification: Performance of FrontEnd: time 1.713e-06/8.848, allocations: 0 / 3.907 GB, free: 49.83 MB / 1.967 GB Notification: Performance of Transformations before backend: time 0.002793/8.851, allocations: 3.875 kB / 3.907 GB, free: 49.83 MB / 1.967 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8753 * Number of variables: 8753 Notification: Performance of Generate backend data structure: time 0.1495/9, allocations: 64.72 MB / 3.97 GB, free: 23.78 MB / 1.967 GB Notification: Performance of prepare preOptimizeDAE: time 3.989e-05/9, allocations: 9.812 kB / 3.97 GB, free: 23.78 MB / 1.967 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01324/9.014, allocations: 4.338 MB / 3.974 GB, free: 22.71 MB / 1.967 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.07158/9.085, allocations: 14.81 MB / 3.989 GB, free: 15.99 MB / 1.967 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.09692/9.182, allocations: 53.89 MB / 4.042 GB, free: 13.02 MB / 1.983 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumChi.eff.getArrayAsString({(ret2.pumChi.eff.per.pressure.dp[2] - ret2.pumChi.eff.per.pressure.dp[1]) / (ret2.pumChi.eff.per.pressure.V_flow[2] - ret2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHotWat.eff.getArrayAsString({(ret2.pumHotWat.eff.per.pressure.dp[2] - ret2.pumHotWat.eff.per.pressure.dp[1]) / (ret2.pumHotWat.eff.per.pressure.V_flow[2] - ret2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHea.eff.getArrayAsString({(ret2.pumHea.eff.per.pressure.dp[2] - ret2.pumHea.eff.per.pressure.dp[1]) / (ret2.pumHea.eff.per.pressure.V_flow[2] - ret2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumChi.eff.getArrayAsString({(apa2.pumChi.eff.per.pressure.dp[2] - apa2.pumChi.eff.per.pressure.dp[1]) / (apa2.pumChi.eff.per.pressure.V_flow[2] - apa2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHotWat.eff.getArrayAsString({(apa2.pumHotWat.eff.per.pressure.dp[2] - apa2.pumHotWat.eff.per.pressure.dp[1]) / (apa2.pumHotWat.eff.per.pressure.V_flow[2] - apa2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHea.eff.getArrayAsString({(apa2.pumHea.eff.per.pressure.dp[2] - apa2.pumHea.eff.per.pressure.dp[1]) / (apa2.pumHea.eff.per.pressure.V_flow[2] - apa2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumChi.eff.getArrayAsString({(larOff4.pumChi.eff.per.pressure.dp[2] - larOff4.pumChi.eff.per.pressure.dp[1]) / (larOff4.pumChi.eff.per.pressure.V_flow[2] - larOff4.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHotWat.eff.getArrayAsString({(larOff4.pumHotWat.eff.per.pressure.dp[2] - larOff4.pumHotWat.eff.per.pressure.dp[1]) / (larOff4.pumHotWat.eff.per.pressure.V_flow[2] - larOff4.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHea.eff.getArrayAsString({(larOff4.pumHea.eff.per.pressure.dp[2] - larOff4.pumHea.eff.per.pressure.dp[1]) / (larOff4.pumHea.eff.per.pressure.V_flow[2] - larOff4.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumChi.eff.getArrayAsString({(larOff3.pumChi.eff.per.pressure.dp[2] - larOff3.pumChi.eff.per.pressure.dp[1]) / (larOff3.pumChi.eff.per.pressure.V_flow[2] - larOff3.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHotWat.eff.getArrayAsString({(larOff3.pumHotWat.eff.per.pressure.dp[2] - larOff3.pumHotWat.eff.per.pressure.dp[1]) / (larOff3.pumHotWat.eff.per.pressure.V_flow[2] - larOff3.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHea.eff.getArrayAsString({(larOff3.pumHea.eff.per.pressure.dp[2] - larOff3.pumHea.eff.per.pressure.dp[1]) / (larOff3.pumHea.eff.per.pressure.V_flow[2] - larOff3.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumChi.eff.getArrayAsString({(apa1.pumChi.eff.per.pressure.dp[2] - apa1.pumChi.eff.per.pressure.dp[1]) / (apa1.pumChi.eff.per.pressure.V_flow[2] - apa1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHotWat.eff.getArrayAsString({(apa1.pumHotWat.eff.per.pressure.dp[2] - apa1.pumHotWat.eff.per.pressure.dp[1]) / (apa1.pumHotWat.eff.per.pressure.V_flow[2] - apa1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHea.eff.getArrayAsString({(apa1.pumHea.eff.per.pressure.dp[2] - apa1.pumHea.eff.per.pressure.dp[1]) / (apa1.pumHea.eff.per.pressure.V_flow[2] - apa1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumChi.eff.getArrayAsString({(larOff2.pumChi.eff.per.pressure.dp[2] - larOff2.pumChi.eff.per.pressure.dp[1]) / (larOff2.pumChi.eff.per.pressure.V_flow[2] - larOff2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHotWat.eff.getArrayAsString({(larOff2.pumHotWat.eff.per.pressure.dp[2] - larOff2.pumHotWat.eff.per.pressure.dp[1]) / (larOff2.pumHotWat.eff.per.pressure.V_flow[2] - larOff2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHea.eff.getArrayAsString({(larOff2.pumHea.eff.per.pressure.dp[2] - larOff2.pumHea.eff.per.pressure.dp[1]) / (larOff2.pumHea.eff.per.pressure.V_flow[2] - larOff2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumChi.eff.getArrayAsString({(ret1.pumChi.eff.per.pressure.dp[2] - ret1.pumChi.eff.per.pressure.dp[1]) / (ret1.pumChi.eff.per.pressure.V_flow[2] - ret1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHotWat.eff.getArrayAsString({(ret1.pumHotWat.eff.per.pressure.dp[2] - ret1.pumHotWat.eff.per.pressure.dp[1]) / (ret1.pumHotWat.eff.per.pressure.V_flow[2] - ret1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHea.eff.getArrayAsString({(ret1.pumHea.eff.per.pressure.dp[2] - ret1.pumHea.eff.per.pressure.dp[1]) / (ret1.pumHea.eff.per.pressure.V_flow[2] - ret1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumChi.eff.getArrayAsString({(larOff1.pumChi.eff.per.pressure.dp[2] - larOff1.pumChi.eff.per.pressure.dp[1]) / (larOff1.pumChi.eff.per.pressure.V_flow[2] - larOff1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHotWat.eff.getArrayAsString({(larOff1.pumHotWat.eff.per.pressure.dp[2] - larOff1.pumHotWat.eff.per.pressure.dp[1]) / (larOff1.pumHotWat.eff.per.pressure.V_flow[2] - larOff1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHea.eff.getArrayAsString({(larOff1.pumHea.eff.per.pressure.dp[2] - larOff1.pumHea.eff.per.pressure.dp[1]) / (larOff1.pumHea.eff.per.pressure.V_flow[2] - larOff1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.01439/9.197, allocations: 7.104 MB / 4.048 GB, free: 9.855 MB / 1.983 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01145/9.208, allocations: 3.553 MB / 4.052 GB, free: 7.441 MB / 1.983 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.1094/9.317, allocations: 44.19 MB / 4.095 GB, free: 8.066 MB / 2.014 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0006938/9.318, allocations: 78.69 kB / 4.095 GB, free: 8.035 MB / 2.014 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.00686/9.325, allocations: 1.421 MB / 4.097 GB, free: 7.695 MB / 2.014 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0006146/9.326, allocations: 0.8702 MB / 4.097 GB, free: 6.836 MB / 2.014 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.09714/9.423, allocations: 38.5 MB / 4.135 GB, free: 8.473 MB / 2.045 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.2904/9.713, allocations: 210.7 MB / 4.341 GB, free: 15.72 MB / 2.264 GB Notification: Performance of preOpt comSubExp (simulation): time 0.1128/9.826, allocations: 39.48 MB / 4.379 GB, free: 8.82 MB / 2.295 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.03049/9.857, allocations: 13.59 MB / 4.393 GB, free: 11.2 MB / 2.311 GB Notification: Performance of preOpt evalFunc (simulation): time 0.09588/9.952, allocations: 66.89 MB / 4.458 GB, free: 3.551 MB / 2.373 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.448/10.4, allocations: 15.31 MB / 4.473 GB, free: 1.484 GB / 2.373 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.01855/10.42, allocations: 2.553 MB / 4.475 GB, free: 1.484 GB / 2.373 GB Notification: Performance of pre-optimization done (n=1811): time 6.772e-05/10.42, allocations: 0 / 4.475 GB, free: 1.484 GB / 2.373 GB Notification: Performance of matching and sorting (n=1811): time 0.2094/10.63, allocations: 59.83 MB / 4.534 GB, free: 1.48 GB / 2.373 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002518/10.63, allocations: 1.186 MB / 4.535 GB, free: 1.479 GB / 2.373 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0702/10.7, allocations: 45.33 MB / 4.579 GB, free: 1.463 GB / 2.373 GB Notification: Performance of collectPreVariables (initialization): time 0.005078/10.7, allocations: 0.4977 MB / 4.58 GB, free: 1.462 GB / 2.373 GB Notification: Performance of collectInitialEqns (initialization): time 0.02071/10.72, allocations: 26.53 MB / 4.606 GB, free: 1.445 GB / 2.373 GB Notification: Performance of collectInitialBindings (initialization): time 0.007051/10.73, allocations: 6.181 MB / 4.612 GB, free: 1.441 GB / 2.373 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.009793/10.74, allocations: 5.85 MB / 4.617 GB, free: 1.438 GB / 2.373 GB Notification: Performance of setup shared object (initialization): time 3.354e-05/10.74, allocations: 305.1 kB / 4.618 GB, free: 1.438 GB / 2.373 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.02866/10.77, allocations: 14.94 MB / 4.632 GB, free: 1.433 GB / 2.373 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.03694/10.81, allocations: 25.3 MB / 4.657 GB, free: 1.416 GB / 2.373 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.06466/10.87, allocations: 35.69 MB / 4.692 GB, free: 1.396 GB / 2.373 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.000245/10.87, allocations: 64.19 kB / 4.692 GB, free: 1.396 GB / 2.373 GB Notification: Performance of matching and sorting (n=3373) (initialization): time 0.1181/10.99, allocations: 47.19 MB / 4.738 GB, free: 1.38 GB / 2.373 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002506/10.99, allocations: 103.4 kB / 4.738 GB, free: 1.38 GB / 2.373 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.000362/10.99, allocations: 228.6 kB / 4.738 GB, free: 1.38 GB / 2.373 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.02931/11.02, allocations: 8.799 MB / 4.747 GB, free: 1.378 GB / 2.373 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02496/11.05, allocations: 6.276 MB / 4.753 GB, free: 1.373 GB / 2.373 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02493/11.07, allocations: 22.05 MB / 4.775 GB, free: 1.353 GB / 2.373 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.04836/11.12, allocations: 5.887 MB / 4.78 GB, free: 1.349 GB / 2.373 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.005201/11.12, allocations: 1.379 MB / 4.782 GB, free: 1.348 GB / 2.373 GB Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.04862/11.17, allocations: 23.43 MB / 4.805 GB, free: 1.328 GB / 2.373 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.0353/11.21, allocations: 24.8 MB / 4.829 GB, free: 1.302 GB / 2.373 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.06087/11.27, allocations: 34.71 MB / 4.863 GB, free: 1.268 GB / 2.373 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.000198/11.27, allocations: 68 kB / 4.863 GB, free: 1.268 GB / 2.373 GB Notification: Performance of matching and sorting (n=3373) (initialization_lambda0): time 0.1144/11.38, allocations: 46.21 MB / 4.908 GB, free: 1.224 GB / 2.373 GB Notification: Performance of prepare postOptimizeDAE: time 0.0001815/11.38, allocations: 104 kB / 4.908 GB, free: 1.224 GB / 2.373 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0002464/11.38, allocations: 231.7 kB / 4.908 GB, free: 1.224 GB / 2.373 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.02967/11.41, allocations: 8.799 MB / 4.917 GB, free: 1.215 GB / 2.373 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02488/11.44, allocations: 6.221 MB / 4.923 GB, free: 1.209 GB / 2.373 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02504/11.46, allocations: 22.05 MB / 4.944 GB, free: 1.187 GB / 2.373 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.04986/11.51, allocations: 6.044 MB / 4.95 GB, free: 1.181 GB / 2.373 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.005249/11.52, allocations: 1.349 MB / 4.952 GB, free: 1.18 GB / 2.373 GB Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 1046 * Number of states: 0 () * Number of discrete variables: 123 ($PRE.ret2.loa.nextTimeEvent,$whenCondition8,$PRE.apa2.loa.nextTimeEvent,$whenCondition7,$PRE.larOff4.loa.nextTimeEvent,$whenCondition6,$PRE.larOff3.loa.nextTimeEvent,$whenCondition5,$PRE.apa1.loa.nextTimeEvent,$whenCondition4,$PRE.larOff2.loa.nextTimeEvent,$whenCondition3,$PRE.ret1.loa.nextTimeEvent,$whenCondition2,$PRE.larOff1.loa.nextTimeEvent,$whenCondition1,ret2.pumChi.eff.haveDPMax,ret2.pumChi.eff.haveMinimumDecrease,ret2.pumChi.eff.per.havePressureCurve,ret2.pumHotWat.eff.haveDPMax,ret2.pumHotWat.eff.haveMinimumDecrease,ret2.pumHotWat.eff.per.havePressureCurve,ret2.pumHea.eff.haveDPMax,ret2.pumHea.eff.haveMinimumDecrease,ret2.pumHea.eff.per.havePressureCurve,apa2.pumChi.eff.haveDPMax,apa2.pumChi.eff.haveMinimumDecrease,apa2.pumChi.eff.per.havePressureCurve,apa2.pumHotWat.eff.haveDPMax,apa2.pumHotWat.eff.haveMinimumDecrease,apa2.pumHotWat.eff.per.havePressureCurve,apa2.pumHea.eff.haveDPMax,apa2.pumHea.eff.haveMinimumDecrease,apa2.pumHea.eff.per.havePressureCurve,larOff4.pumChi.eff.haveDPMax,larOff4.pumChi.eff.haveMinimumDecrease,larOff4.pumChi.eff.per.havePressureCurve,larOff4.pumHotWat.eff.haveDPMax,larOff4.pumHotWat.eff.haveMinimumDecrease,larOff4.pumHotWat.eff.per.havePressureCurve,larOff4.pumHea.eff.haveDPMax,larOff4.pumHea.eff.haveMinimumDecrease,larOff4.pumHea.eff.per.havePressureCurve,larOff3.pumChi.eff.haveDPMax,larOff3.pumChi.eff.haveMinimumDecrease,larOff3.pumChi.eff.per.havePressureCurve,larOff3.pumHotWat.eff.haveDPMax,larOff3.pumHotWat.eff.haveMinimumDecrease,larOff3.pumHotWat.eff.per.havePressureCurve,larOff3.pumHea.eff.haveDPMax,larOff3.pumHea.eff.haveMinimumDecrease,larOff3.pumHea.eff.per.havePressureCurve,apa1.pumChi.eff.haveDPMax,apa1.pumChi.eff.haveMinimumDecrease,apa1.pumChi.eff.per.havePressureCurve,apa1.pumHotWat.eff.haveDPMax,apa1.pumHotWat.eff.haveMinimumDecrease,apa1.pumHotWat.eff.per.havePressureCurve,apa1.pumHea.eff.haveDPMax,apa1.pumHea.eff.haveMinimumDecrease,apa1.pumHea.eff.per.havePressureCurve,larOff2.pumChi.eff.haveDPMax,larOff2.pumChi.eff.haveMinimumDecrease,larOff2.pumChi.eff.per.havePressureCurve,larOff2.pumHotWat.eff.haveDPMax,larOff2.pumHotWat.eff.haveMinimumDecrease,larOff2.pumHotWat.eff.per.havePressureCurve,larOff2.pumHea.eff.haveDPMax,larOff2.pumHea.eff.haveMinimumDecrease,larOff2.pumHea.eff.per.havePressureCurve,ret1.pumChi.eff.haveDPMax,ret1.pumChi.eff.haveMinimumDecrease,ret1.pumChi.eff.per.havePressureCurve,ret1.pumHotWat.eff.haveDPMax,ret1.pumHotWat.eff.haveMinimumDecrease,ret1.pumHotWat.eff.per.havePressureCurve,ret1.pumHea.eff.haveDPMax,ret1.pumHea.eff.haveMinimumDecrease,ret1.pumHea.eff.per.havePressureCurve,larOff1.pumChi.eff.haveDPMax,larOff1.pumChi.eff.haveMinimumDecrease,larOff1.pumChi.eff.per.havePressureCurve,larOff1.pumHotWat.eff.haveDPMax,larOff1.pumHotWat.eff.haveMinimumDecrease,larOff1.pumHotWat.eff.per.havePressureCurve,larOff1.pumHea.eff.haveDPMax,larOff1.pumHea.eff.haveMinimumDecrease,larOff1.pumHea.eff.per.havePressureCurve,weaDat.conTim.tNext,$PRE.weaDat.conTim.tNext,weaDat.conTimMin.tNext,$PRE.weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,$PRE.ret2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,$PRE.apa2.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,$PRE.larOff4.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,$PRE.larOff3.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,$PRE.apa1.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,$PRE.larOff2.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,$PRE.ret1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,$PRE.larOff1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEvent,$whenCondition9,$whenCondition10,ETheCoo.local_reset,ETheHotWat.local_reset,ETheHea.local_reset,EEleCoo.local_reset,EEleHea.local_reset) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (2989): * Single equations (assignments): 2917 * Array equations: 24 * Algorithm blocks: 0 * Record equations: 24 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 24 systems {(1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12)} Notification: Performance of prepare postOptimizeDAE: time 0.009348/11.53, allocations: 1.985 MB / 4.954 GB, free: 1.178 GB / 2.373 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01249/11.54, allocations: 4.602 MB / 4.958 GB, free: 1.174 GB / 2.373 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.1054/11.65, allocations: 49.79 MB / 5.007 GB, free: 1.125 GB / 2.373 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.0002612/11.65, allocations: 255.8 kB / 5.007 GB, free: 1.125 GB / 2.373 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 4.002e-05/11.65, allocations: 4 kB / 5.007 GB, free: 1.125 GB / 2.373 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0763/11.72, allocations: 30.5 MB / 5.037 GB, free: 1.095 GB / 2.373 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1756/11.9, allocations: 88.42 MB / 5.123 GB, free: 1.009 GB / 2.373 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0001499/11.9, allocations: 36 kB / 5.123 GB, free: 1.009 GB / 2.373 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01804/11.92, allocations: 3.952 MB / 5.127 GB, free: 1.005 GB / 2.373 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.02008/11.94, allocations: 7.343 MB / 5.134 GB, free: 0.9976 GB / 2.373 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002975/11.94, allocations: 0.566 MB / 5.135 GB, free: 0.9971 GB / 2.373 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02435/11.96, allocations: 21.97 MB / 5.156 GB, free: 0.9751 GB / 2.373 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.751e-05/11.96, allocations: 47.81 kB / 5.156 GB, free: 0.975 GB / 2.373 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1208/12.08, allocations: 58.67 MB / 5.213 GB, free: 0.917 GB / 2.373 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02098/12.11, allocations: 8.765 MB / 5.222 GB, free: 0.9084 GB / 2.373 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01101/12.12, allocations: 399.8 kB / 5.222 GB, free: 0.908 GB / 2.373 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.03783/12.15, allocations: 4.109 MB / 5.226 GB, free: 0.904 GB / 2.373 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.002762/12.16, allocations: 1.285 MB / 5.228 GB, free: 0.9027 GB / 2.373 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.00242/12.16, allocations: 0.925 MB / 5.229 GB, free: 0.9018 GB / 2.373 GB Notification: Performance of sorting global known variables: time 0.04837/12.21, allocations: 30.77 MB / 5.259 GB, free: 0.872 GB / 2.373 GB Notification: Performance of sort global known variables: time 3.81e-07/12.21, allocations: 0 / 5.259 GB, free: 0.872 GB / 2.373 GB Notification: Performance of remove unused functions: time 0.07231/12.28, allocations: 24.05 MB / 5.282 GB, free: 0.8489 GB / 2.373 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 129 * Number of states: 5 (EEleHea.y,EEleCoo.y,ETheHea.y,ETheHotWat.y,ETheCoo.y) * Number of discrete variables: 28 ($whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,larOff1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,ret2.loa.nextTimeEventScaled,weaDat.conTimMin.tNext,weaDat.conTim.tNext) * Number of discrete states: 18 (ret2.loa.nextTimeEvent,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEvent,weaDat.conTim.tNext,weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,apa2.loa.nextTimeEventScaled,larOff4.loa.nextTimeEventScaled,larOff3.loa.nextTimeEventScaled,apa1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEventScaled,ret1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEventScaled) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (1737): * Single equations (assignments): 1575 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 120 * When equations: 18 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 24 systems {(1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14), (1,14)} Notification: Performance of Backend phase and start with SimCode phase: time 0.1247/12.41, allocations: 65.17 MB / 5.346 GB, free: 0.7861 GB / 2.373 GB Notification: Performance of simCode: created initialization part: time 0.4091/12.81, allocations: 74.6 MB / 5.419 GB, free: 0.7133 GB / 2.373 GB Notification: Performance of simCode: created event and clocks part: time 3.081e-05/12.81, allocations: 28.58 kB / 5.419 GB, free: 0.7133 GB / 2.373 GB Notification: Performance of simCode: created simulation system equations: time 0.03193/12.85, allocations: 14.96 MB / 5.433 GB, free: 0.6987 GB / 2.373 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.09811/12.94, allocations: 23.34 MB / 5.456 GB, free: 0.6766 GB / 2.373 GB Warning: Could not resolve URI (uri) at compile-time; copying all loaded packages into the FMU Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 3.903/16.85, allocations: 1.269 GB / 6.725 GB, free: 0.9516 GB / 2.373 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.0335/16.88, allocations: 20.92 MB / 6.746 GB, free: 0.9484 GB / 2.373 GB Notification: Performance of simCode: alias equations: time 0.05052/16.93, allocations: 10.87 MB / 6.756 GB, free: 0.9477 GB / 2.373 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.03386/16.97, allocations: 26.04 MB / 6.782 GB, free: 0.9267 GB / 2.373 GB Notification: Performance of SimCode: time 8.92e-07/16.97, allocations: 3.938 kB / 6.782 GB, free: 0.9267 GB / 2.373 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 6.294/23.26, allocations: 1.266 GB / 8.048 GB, free: 1.177 GB / 2.374 GB Notification: Performance of buildModelFMU: configured platform static using cached values: time 0.0001977/23.26, allocations: 354.7 kB / 8.048 GB, free: 1.177 GB / 2.374 GB Notification: Performance of buildModelFMU: Generate platform static: time 39.96/63.22, allocations: 3.938 kB / 8.048 GB, free: 1.177 GB / 2.374 GB (rm -f Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe ; mkfifo Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe ; head -c 1048576 < Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe >> ../files/Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.sim & /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --tempDir=temp_Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_fmu --startTime=0 --stopTime=3.1536e+07 --timeout=50 --tolerance=1e-06 Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase.fmu > Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe 2>&1)