Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_ThermofluidStream.Examples.HeatPump.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false)
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.HeatPump")
translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.HeatPump")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001417/0.001417, allocations: 109.2 kB / 15.99 MB, free: 5.891 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001709/0.001709, allocations: 194.9 kB / 16.91 MB, free: 5.746 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.323/1.323, allocations: 222.9 MB / 240.6 MB, free: 4.535 MB / 190.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.6906/0.6906, allocations: 91.2 MB / 381.9 MB, free: 9.547 MB / 318.1 MB
Notification: Performance of FrontEnd - loaded program: time 0.001495/0.001495, allocations: 85.03 kB / 460.5 MB, free: 23.28 MB / 350.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1182/0.1197, allocations: 67.69 MB / 0.5158 GB, free: 10.52 MB / 398.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.HeatPump): time 1.007/1.127, allocations: 392.2 MB / 0.8988 GB, free: 476 kB / 0.6231 GB
Notification: Performance of NFInst.instExpressions: time 0.7392/1.866, allocations: 232.1 MB / 1.125 GB, free: 300 kB / 0.7637 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter Cvs_US has annotation(Evaluate=true) and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter Cvs_UK has annotation(Evaluate=true) and no binding.
Notification: Performance of NFInst.updateImplicitVariability: time 0.00667/1.873, allocations: 152.4 kB / 1.126 GB, free: 300 kB / 0.7637 GB
Notification: Performance of NFTyping.typeComponents: time 0.008035/1.881, allocations: 2.025 MB / 1.128 GB, free: 288 kB / 0.7637 GB
Notification: Performance of NFTyping.typeBindings: time 0.0295/1.911, allocations: 7.958 MB / 1.135 GB, free: 172 kB / 0.7637 GB
Notification: Performance of NFTyping.typeClassSections: time 0.06499/1.976, allocations: 19.26 MB / 1.154 GB, free: 15.71 MB / 0.7794 GB
Notification: Performance of NFFlatten.flatten: time 0.01968/1.995, allocations: 17.18 MB / 1.171 GB, free: 15.7 MB / 0.7794 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.007208/2.003, allocations: 4.387 MB / 1.175 GB, free: 14.43 MB / 0.7794 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0536/2.056, allocations: 30.98 MB / 1.206 GB, free: 10.1 MB / 0.7794 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01448/2.071, allocations: 6.945 MB / 1.212 GB, free: 5.129 MB / 0.7794 GB
Notification: Performance of NFPackage.collectConstants: time 0.006651/2.077, allocations: 1.156 MB / 1.213 GB, free: 3.973 MB / 0.7794 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.2981/2.376, allocations: 228.3 MB / 1.436 GB, free: 6.906 MB / 0.9981 GB
Notification: Performance of NFScalarize.scalarize: time 0.006535/2.382, allocations: 2.709 MB / 1.439 GB, free: 5.625 MB / 0.9981 GB
Notification: Performance of NFVerifyModel.verify: time 0.01552/2.398, allocations: 6.46 MB / 1.445 GB, free: 1.348 MB / 0.9981 GB
Notification: Performance of NFConvertDAE.convert: time 0.7433/3.141, allocations: 102.4 MB / 1.545 GB, free: 213.5 MB / 1.029 GB
Notification: Performance of FrontEnd - DAE generated: time 6.402e-06/3.141, allocations: 0 / 1.545 GB, free: 213.5 MB / 1.029 GB
Notification: Performance of FrontEnd: time 2.044e-06/3.141, allocations: 0 / 1.545 GB, free: 213.5 MB / 1.029 GB
Notification: Performance of Transformations before backend: time 0.0006515/3.142, allocations: 0.5625 kB / 1.545 GB, free: 213.5 MB / 1.029 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2280
 * Number of variables: 2280
Notification: Performance of Generate backend data structure: time 0.1077/3.249, allocations: 18 MB / 1.563 GB, free: 200.5 MB / 1.029 GB
Notification: Performance of prepare preOptimizeDAE: time 4.814e-05/3.249, allocations: 8.031 kB / 1.563 GB, free: 200.5 MB / 1.029 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01437/3.264, allocations: 2.019 MB / 1.565 GB, free: 198.9 MB / 1.029 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0159/3.28, allocations: 6.599 MB / 1.571 GB, free: 194.9 MB / 1.029 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0008289/3.281, allocations: 0.7315 MB / 1.572 GB, free: 194.5 MB / 1.029 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.004637/3.285, allocations: 0.8409 MB / 1.573 GB, free: 193.9 MB / 1.029 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0417/3.327, allocations: 15.36 MB / 1.588 GB, free: 183.1 MB / 1.029 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0003724/3.327, allocations: 5.969 kB / 1.588 GB, free: 183.1 MB / 1.029 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.00393/3.331, allocations: 342.6 kB / 1.588 GB, free: 183 MB / 1.029 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0002386/3.332, allocations: 271.4 kB / 1.588 GB, free: 182.8 MB / 1.029 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.04099/3.373, allocations: 17.46 MB / 1.606 GB, free: 170.7 MB / 1.029 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.09858/3.471, allocations: 58.43 MB / 1.663 GB, free: 122.2 MB / 1.029 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02294/3.494, allocations: 11.93 MB / 1.674 GB, free: 110.6 MB / 1.029 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01462/3.509, allocations: 8.267 MB / 1.682 GB, free: 102.3 MB / 1.029 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.02025/3.529, allocations: 43.47 MB / 1.725 GB, free: 49.36 MB / 1.029 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001955/3.529, allocations: 134.3 kB / 1.725 GB, free: 49.21 MB / 1.029 GB
Notification: Performance of pre-optimization done (n=1023): time 2.853e-05/3.529, allocations: 0 / 1.725 GB, free: 49.21 MB / 1.029 GB
Notification: Performance of matching and sorting (n=1031): time 0.129/3.658, allocations: 46.44 MB / 1.77 GB, free: 2.117 MB / 1.029 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 9.532e-05/3.659, allocations: 215.2 kB / 1.77 GB, free: 1.875 MB / 1.029 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter controlValve.Cvs_UK has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter controlValve.Cvs_US has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01338/3.672, allocations: 6.339 MB / 1.777 GB, free: 11.57 MB / 1.045 GB
Notification: Performance of collectPreVariables (initialization): time 0.003265/3.675, allocations: 181.7 kB / 1.777 GB, free: 11.39 MB / 1.045 GB
Notification: Performance of collectInitialEqns (initialization): time 0.004243/3.68, allocations: 3.974 MB / 1.781 GB, free: 7.406 MB / 1.045 GB
Notification: Performance of collectInitialBindings (initialization): time 0.006495/3.686, allocations: 3.437 MB / 1.784 GB, free: 4.008 MB / 1.045 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.01168/3.698, allocations: 2.125 MB / 1.786 GB, free: 1.871 MB / 1.045 GB
Notification: Performance of setup shared object (initialization): time 9.481e-05/3.698, allocations: 305.1 kB / 1.786 GB, free: 1.57 MB / 1.045 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01698/3.715, allocations: 7.524 MB / 1.794 GB, free: 10.03 MB / 1.061 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.02099/3.736, allocations: 9.112 MB / 1.803 GB, free: 400 kB / 1.061 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.04279/3.779, allocations: 20.6 MB / 1.823 GB, free: 10.63 MB / 1.092 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 7.13e-05/3.779, allocations: 12.66 kB / 1.823 GB, free: 10.62 MB / 1.092 GB
Notification: Performance of matching and sorting (n=1280) (initialization): time 0.05549/3.834, allocations: 19.84 MB / 1.842 GB, free: 6.902 MB / 1.107 GB
Notification: Performance of prepare postOptimizeDAE: time 8.74e-05/3.834, allocations: 20.62 kB / 1.842 GB, free: 6.883 MB / 1.107 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001409/3.835, allocations: 44 kB / 1.842 GB, free: 6.84 MB / 1.107 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01424/3.849, allocations: 2.17 MB / 1.844 GB, free: 4.602 MB / 1.107 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0119/3.861, allocations: 2.59 MB / 1.847 GB, free: 2.109 MB / 1.107 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.674/4.535, allocations: 45.51 MB / 1.891 GB, free: 0.5393 GB / 1.123 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0167/4.552, allocations: 1.011 MB / 1.892 GB, free: 0.5393 GB / 1.123 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0048/4.556, allocations: 0.7584 MB / 1.893 GB, free: 0.5393 GB / 1.123 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.03046/4.587, allocations: 10.34 MB / 1.903 GB, free: 0.5391 GB / 1.123 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.01633/4.603, allocations: 9.077 MB / 1.912 GB, free: 0.5368 GB / 1.123 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.03638/4.64, allocations: 20.54 MB / 1.932 GB, free: 0.526 GB / 1.123 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0001145/4.64, allocations: 9.188 kB / 1.932 GB, free: 0.526 GB / 1.123 GB
Notification: Performance of matching and sorting (n=1280) (initialization_lambda0): time 0.07106/4.711, allocations: 19.76 MB / 1.951 GB, free: 0.5196 GB / 1.123 GB
Notification: Performance of prepare postOptimizeDAE: time 7.845e-05/4.711, allocations: 23.8 kB / 1.951 GB, free: 0.5196 GB / 1.123 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001378/4.711, allocations: 41.22 kB / 1.951 GB, free: 0.5196 GB / 1.123 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01433/4.726, allocations: 2.172 MB / 1.954 GB, free: 0.519 GB / 1.123 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01186/4.737, allocations: 2.575 MB / 1.956 GB, free: 0.5188 GB / 1.123 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.03145/4.769, allocations: 45.52 MB / 2.001 GB, free: 492.1 MB / 1.123 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01095/4.78, allocations: 1.008 MB / 2.002 GB, free: 492 MB / 1.123 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003446/4.783, allocations: 0.7627 MB / 2.002 GB, free: 491.9 MB / 1.123 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 170
 * Number of states: 0 ()
 * Number of discrete variables: 49 (accumulator.medium.phase,receiver.medium.phase,accumulator.outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,controlValve.outlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI2.I.local_reset,PI1.I.local_reset,PI.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (989):
 * Single equations (assignments): 916
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 47
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 26
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,13,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.006618/4.79, allocations: 1.007 MB / 2.003 GB, free: 491.2 MB / 1.123 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.004934/4.795, allocations: 0.875 MB / 2.004 GB, free: 491.2 MB / 1.123 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.06867/4.864, allocations: 33.53 MB / 2.037 GB, free: 475.2 MB / 1.123 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.04293/4.907, allocations: 20.25 MB / 2.057 GB, free: 454.9 MB / 1.123 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001034/4.907, allocations: 23.94 kB / 2.057 GB, free: 454.9 MB / 1.123 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0003289/4.907, allocations: 55.8 kB / 2.057 GB, free: 454.8 MB / 1.123 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.08506/4.992, allocations: 43.94 MB / 2.1 GB, free: 409.9 MB / 1.123 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.000142/4.992, allocations: 8 kB / 2.1 GB, free: 409.9 MB / 1.123 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01087/5.003, allocations: 2.305 MB / 2.102 GB, free: 407.6 MB / 1.123 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.006383/5.01, allocations: 2.154 MB / 2.104 GB, free: 405.3 MB / 1.123 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.003355/5.013, allocations: 407.7 kB / 2.104 GB, free: 404.9 MB / 1.123 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02882/5.042, allocations: 46.72 MB / 2.15 GB, free: 354.9 MB / 1.123 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.324e-06/5.042, allocations: 0 / 2.15 GB, free: 354.9 MB / 1.123 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.06205/5.104, allocations: 31.11 MB / 2.18 GB, free: 323.6 MB / 1.123 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.008142/5.112, allocations: 2.627 MB / 2.183 GB, free: 320.9 MB / 1.123 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.004132/5.116, allocations: 220 kB / 2.183 GB, free: 320.7 MB / 1.123 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.01081/5.127, allocations: 1.277 MB / 2.184 GB, free: 319.4 MB / 1.123 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.0033/5.13, allocations: 0.7843 MB / 2.185 GB, free: 318.6 MB / 1.123 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.002958/5.133, allocations: 0.5388 MB / 2.186 GB, free: 318.1 MB / 1.123 GB
Notification: Performance of sorting global known variables: time 0.008255/5.142, allocations: 4.317 MB / 2.19 GB, free: 313.8 MB / 1.123 GB
Notification: Performance of sort global known variables: time 5.21e-07/5.142, allocations: 0 / 2.19 GB, free: 313.8 MB / 1.123 GB
Notification: Performance of remove unused functions: time 0.06689/5.209, allocations: 8.912 MB / 2.199 GB, free: 305.6 MB / 1.123 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 3
 * Number of states: 56 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,compressor.m_flow,compressor.phi,compressor.omega,receiver.M,receiver.U_med,fan.m_flow,fan1.m_flow,accumulator.M,accumulator.U_med,accumulator.m_flow_in,heatCapacitor.T,sensorVaporQuality8.value,PI.I.y,PI1.I.y,PI2.I.y,firstOrder2.y)
 * Number of discrete variables: 117 (condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[9].outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[9].outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,accumulator.outlet.state.phase,$cse1.phase,$cse2,$cse3.phase,$cse4,$cse5.phase,$cse6,$cse7.phase,$cse8,$cse9.phase,$cse11.phase,$cse12,$cse15.phase,$cse18.phase,$cse19,$cse21.phase,$cse22,$cse24.phase,$cse25,$cse27.phase,$cse28,$cse30.phase,$cse31,$cse33.phase,$cse34,$cse37.phase,$cse38.phase,$cse39,$cse41.phase,$cse42,$cse45.phase,$cse46,$cse49.phase,$cse50,$cse53.phase,$cse54,$cse57.phase,$cse58,$cse61.phase,$cse62,$cse65.phase,$cse66,$cse69.phase,$cse70,$cse73.phase,$cse74,$cse77.phase,$cse78,$cse81.phase,$cse82,$cse85.phase,$cse86,$cse89.phase,$cse90,$cse93.phase,$cse94,$cse97.phase,$cse98,$cse101.phase,$cse102,$cse105.phase,$cse106,$cse109.phase,$cse110,$cse113.phase,$cse114,$cse117.phase,$cse118,$cse122.phase,$cse123,$cse124.phase,$cse125,$cse126.phase,$cse127,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[10].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[10].state.phase,controlValve.outlet.state.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (960):
 * Single equations (assignments): 850
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 82
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 28
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,1), (1,1), (1,3), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.3001/5.509, allocations: 50.75 MB / 2.248 GB, free: 256.1 MB / 1.123 GB
Notification: Performance of simCode: created initialization part: time 0.2219/5.731, allocations: 80.01 MB / 2.326 GB, free: 175.5 MB / 1.123 GB
Notification: Performance of simCode: created event and clocks part: time 1.499e-05/5.731, allocations: 10.56 kB / 2.326 GB, free: 175.5 MB / 1.123 GB
Notification: Performance of simCode: created simulation system equations: time 0.02375/5.755, allocations: 13.82 MB / 2.34 GB, free: 161.2 MB / 1.123 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.02316/5.778, allocations: 3.889 MB / 2.344 GB, free: 157.5 MB / 1.123 GB
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(compressor.outputQuantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.05515/5.833, allocations: 34.49 MB / 2.377 GB, free: 123 MB / 1.123 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.008207/5.841, allocations: 6.791 MB / 2.384 GB, free: 116.2 MB / 1.123 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.009556/5.851, allocations: 1.818 MB / 2.386 GB, free: 114.4 MB / 1.123 GB
Notification: Performance of SimCode: time 8.11e-07/5.851, allocations: 0 / 2.386 GB, free: 114.4 MB / 1.123 GB
Notification: Performance of Templates: time 3.089/8.94, allocations: 1.698 GB / 4.084 GB, free: 0.5041 GB / 1.123 GB
make -j1 -f ThermofluidStream_ThermofluidStream.Examples.HeatPump.makefile
(rm -f ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe ; mkfifo ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe ; head -c 1048576 < ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe >> ../files/ThermofluidStream_ThermofluidStream.Examples.HeatPump.sim & ./ThermofluidStream_ThermofluidStream.Examples.HeatPump  -abortSlowSimulation -alarm=1200  -emit_protected -lv LOG_STATS > ThermofluidStream_ThermofluidStream.Examples.HeatPump.pipe 2>&1)
diffSimulationResults("ThermofluidStream_ThermofluidStream.Examples.HeatPump_res.mat","/mnt/ReferenceFiles/ThermofluidStream-main-regression/ReferenceData/ThermofluidStream.Examples.HeatPump_ref.mat","/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/ThermofluidStream_ThermofluidStream.Examples.HeatPump.diff",relTol=0.003,relTolDiffMinMax=0.003,rangeDelta=0.001)
Reference file matches