Environment - simulationEnvironment:
startTime=0
stopTime=3600
tolerance=1e-06
numberOfIntervals=2500
stepSize=1.44
Regular simulation: ./Buildings_latest_Buildings.DHC.Networks.Examples.Distribution1PipeExample  -abortSlowSimulation -alarm=480  -emit_protected -lv LOG_STATS
stdout            | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 11.0.1-master/Resources/Data/DHC/Loads/Examples/SwissResidential_20190916.mos"
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | Non-Linear Solver try to handle a problem with a called assert.
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | Non-Linear Solver try to handle a problem with a called assert.
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | Non-Linear Solver try to handle a problem with a called assert.
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | Non-Linear Solver try to handle a problem with a called assert.
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | Non-Linear Solver try to handle a problem with a called assert.
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
assert            | debug   | Division by zero roughness / diameter in function context
stdout            | warning | While solving non-linear system an assertion failed during initialization.
|                 | |       | | The non-linear solver tries to solve the problem that could take some time.
|                 | |       | | It could help to provide better start-values for the iteration variables.
|                 | |       | | For more information simulate with -lv LOG_NLS_V
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terAutoSize.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumAutoSize.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumAutoSize.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Distribution1PipeExample.pumAutoSize: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumAutoSize.per.haveWMot_nominal or not (pumAutoSize.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumAutoSize.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Distribution1PipeExample.pumAutoSize: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | false
assert            | warning | *** Warning in Distribution1PipeExample.terPlugFlow.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumPlugFlow.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumPlugFlow.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Distribution1PipeExample.pumPlugFlow: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumPlugFlow.per.haveWMot_nominal or not (pumPlugFlow.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumPlugFlow.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Distribution1PipeExample.pumPlugFlow: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |     0.275827s          reading init.xml
|                 | |       | | |     0.021891s          reading info.xml
|                 | |       | | |   0.00943411s [  0.1%] pre-initialization
|                 | |       | | |   0.00673668s [  0.1%] initialization
|                 | |       | | |  0.000297789s [  0.0%] steps
|                 | |       | | |      1.35781s [ 10.6%] solver (excl. callbacks)
|                 | |       | | |    0.0572693s [  0.4%] creating output-file
|                 | |       | | |      1.15286s [  9.0%] event-handling
|                 | |       | | |    0.0709041s [  0.6%] overhead
|                 | |       | | |      10.1635s [ 79.3%] simulation
|                 | |       | | |      12.8188s [100.0%] total
|                 | |       | | events
|                 | |       | | |     1 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | | 54492 steps taken
|                 | |       | | | 114961 calls of functionODE
|                 | |       | | | 31772 evaluations of jacobian
|                 | |       | | | 14121 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 6.28106s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.