Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries/ --ompython_omhome=/usr Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo", uses=false) Using package Buildings with version 8.1.4 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo) Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo) Running command: "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001024/0.001025, allocations: 111.3 kB / 15.23 MB, free: 0.6406 MB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001011/0.001011, allocations: 198.5 kB / 16.14 MB, free: 6.707 MB / 14.72 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 1.131/1.131, allocations: 205.1 MB / 222 MB, free: 5.016 MB / 174.1 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/package.mo): time 1.48/1.48, allocations: 292.3 MB / 0.5484 GB, free: 13.66 MB / 462.1 MB Notification: Modelica requested package Complex of version 3.2.3. Complex 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Modelica requested package ModelicaServices of version 3.2.3. ModelicaServices 4.0.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Performance of FrontEnd - loaded program: time 0.001277/0.001277, allocations: 71.73 kB / 0.6709 GB, free: 26.33 MB / 0.5294 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1639/0.1652, allocations: 114.6 MB / 0.7828 GB, free: 13.89 MB / 0.6075 GB Notification: Performance of NFInst.instantiate(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase): time 3.236/3.401, allocations: 1.937 GB / 2.719 GB, free: 10.25 MB / 1.467 GB Notification: Performance of NFInst.instExpressions: time 1.382/4.783, allocations: 0.561 GB / 3.28 GB, free: 14.55 MB / 1.654 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.07638/4.86, allocations: 2.149 MB / 3.282 GB, free: 14.55 MB / 1.654 GB Notification: Performance of NFTyping.typeComponents: time 0.0691/4.929, allocations: 24.01 MB / 3.306 GB, free: 12.15 MB / 1.67 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:2:1-99:16:writable] Warning: Pure function ‘Buildings.Experimental.DHC.Loads.BaseClasses.getPeakLoad‘ contains a call to impure function ‘Modelica.Utilities.Streams.readLine‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getHeaderElementTMY3.mo:2:1-105:25:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘ contains a call to impure function ‘Modelica.Utilities.Streams.readLine‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLongitudeTMY3.mo:2:1-48:21:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getLongitudeTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getLatitudeTMY3.mo:2:1-48:20:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getLatitudeTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/BoundaryConditions/WeatherData/BaseClasses/getTimeZoneTMY3.mo:2:1-47:20:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeZoneTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. Notification: Performance of NFTyping.typeBindings: time 0.1734/5.102, allocations: 70.75 MB / 3.375 GB, free: 1.816 MB / 1.717 GB Notification: Performance of NFTyping.typeClassSections: time 0.09323/5.196, allocations: 44.99 MB / 3.419 GB, free: 9.074 MB / 1.764 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:34:5-36:23:writable] Error: Failed to evaluate function: Modelica.Utilities.Streams.readLine. Notification: Performance of NFFlatten.flatten: time 0.1834/5.379, allocations: 186.3 MB / 3.601 GB, free: 2.684 MB / 1.936 GB Notification: Performance of NFFlatten.resolveConnections: time 1.875/7.254, allocations: 47.28 MB / 3.647 GB, free: 28.17 MB / 1.967 GB Notification: Performance of NFEvalConstants.evaluate: time 0.09939/7.353, allocations: 49.34 MB / 3.695 GB, free: 26.4 MB / 1.967 GB Notification: Performance of NFSimplifyModel.simplify: time 0.06925/7.422, allocations: 41.93 MB / 3.736 GB, free: 18.82 MB / 1.967 GB Notification: Performance of NFPackage.collectConstants: time 0.01948/7.442, allocations: 2.884 MB / 3.739 GB, free: 18.82 MB / 1.967 GB Notification: Performance of NFFlatten.collectFunctions: time 0.07313/7.515, allocations: 24.47 MB / 3.763 GB, free: 18.8 MB / 1.967 GB Notification: Performance of NFScalarize.scalarize: time 0.0251/7.54, allocations: 12.9 MB / 3.775 GB, free: 16.56 MB / 1.967 GB Notification: Performance of NFVerifyModel.verify: time 0.0581/7.598, allocations: 30.42 MB / 3.805 GB, free: 7.59 MB / 1.967 GB Notification: Performance of NFConvertDAE.convert: time 0.124/7.722, allocations: 103.6 MB / 3.906 GB, free: 13 MB / 1.983 GB Notification: Performance of FrontEnd - DAE generated: time 6.893e-06/7.722, allocations: 10.11 kB / 3.906 GB, free: 13 MB / 1.983 GB Notification: Performance of FrontEnd: time 1.432e-06/7.722, allocations: 0 / 3.906 GB, free: 13 MB / 1.983 GB Notification: Performance of Transformations before backend: time 0.00243/7.725, allocations: 0 / 3.906 GB, free: 13 MB / 1.983 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8753 * Number of variables: 8753 Notification: Performance of Generate backend data structure: time 0.1455/7.87, allocations: 64.71 MB / 3.97 GB, free: 1.836 MB / 1.998 GB Notification: Performance of prepare preOptimizeDAE: time 4.116e-05/7.871, allocations: 10.44 kB / 3.97 GB, free: 1.836 MB / 1.998 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01254/7.883, allocations: 4.344 MB / 3.974 GB, free: 0.7656 MB / 1.998 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.07338/7.956, allocations: 14.82 MB / 3.988 GB, free: 9.977 MB / 2.014 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.1011/8.058, allocations: 53.89 MB / 4.041 GB, free: 7.012 MB / 2.029 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumChi.eff.getArrayAsString({(ret2.pumChi.eff.per.pressure.dp[2] - ret2.pumChi.eff.per.pressure.dp[1]) / (ret2.pumChi.eff.per.pressure.V_flow[2] - ret2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHotWat.eff.getArrayAsString({(ret2.pumHotWat.eff.per.pressure.dp[2] - ret2.pumHotWat.eff.per.pressure.dp[1]) / (ret2.pumHotWat.eff.per.pressure.V_flow[2] - ret2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHea.eff.getArrayAsString({(ret2.pumHea.eff.per.pressure.dp[2] - ret2.pumHea.eff.per.pressure.dp[1]) / (ret2.pumHea.eff.per.pressure.V_flow[2] - ret2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumChi.eff.getArrayAsString({(apa2.pumChi.eff.per.pressure.dp[2] - apa2.pumChi.eff.per.pressure.dp[1]) / (apa2.pumChi.eff.per.pressure.V_flow[2] - apa2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHotWat.eff.getArrayAsString({(apa2.pumHotWat.eff.per.pressure.dp[2] - apa2.pumHotWat.eff.per.pressure.dp[1]) / (apa2.pumHotWat.eff.per.pressure.V_flow[2] - apa2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHea.eff.getArrayAsString({(apa2.pumHea.eff.per.pressure.dp[2] - apa2.pumHea.eff.per.pressure.dp[1]) / (apa2.pumHea.eff.per.pressure.V_flow[2] - apa2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumChi.eff.getArrayAsString({(larOff4.pumChi.eff.per.pressure.dp[2] - larOff4.pumChi.eff.per.pressure.dp[1]) / (larOff4.pumChi.eff.per.pressure.V_flow[2] - larOff4.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHotWat.eff.getArrayAsString({(larOff4.pumHotWat.eff.per.pressure.dp[2] - larOff4.pumHotWat.eff.per.pressure.dp[1]) / (larOff4.pumHotWat.eff.per.pressure.V_flow[2] - larOff4.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHea.eff.getArrayAsString({(larOff4.pumHea.eff.per.pressure.dp[2] - larOff4.pumHea.eff.per.pressure.dp[1]) / (larOff4.pumHea.eff.per.pressure.V_flow[2] - larOff4.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumChi.eff.getArrayAsString({(larOff3.pumChi.eff.per.pressure.dp[2] - larOff3.pumChi.eff.per.pressure.dp[1]) / (larOff3.pumChi.eff.per.pressure.V_flow[2] - larOff3.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHotWat.eff.getArrayAsString({(larOff3.pumHotWat.eff.per.pressure.dp[2] - larOff3.pumHotWat.eff.per.pressure.dp[1]) / (larOff3.pumHotWat.eff.per.pressure.V_flow[2] - larOff3.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHea.eff.getArrayAsString({(larOff3.pumHea.eff.per.pressure.dp[2] - larOff3.pumHea.eff.per.pressure.dp[1]) / (larOff3.pumHea.eff.per.pressure.V_flow[2] - larOff3.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumChi.eff.getArrayAsString({(apa1.pumChi.eff.per.pressure.dp[2] - apa1.pumChi.eff.per.pressure.dp[1]) / (apa1.pumChi.eff.per.pressure.V_flow[2] - apa1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHotWat.eff.getArrayAsString({(apa1.pumHotWat.eff.per.pressure.dp[2] - apa1.pumHotWat.eff.per.pressure.dp[1]) / (apa1.pumHotWat.eff.per.pressure.V_flow[2] - apa1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHea.eff.getArrayAsString({(apa1.pumHea.eff.per.pressure.dp[2] - apa1.pumHea.eff.per.pressure.dp[1]) / (apa1.pumHea.eff.per.pressure.V_flow[2] - apa1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumChi.eff.getArrayAsString({(larOff2.pumChi.eff.per.pressure.dp[2] - larOff2.pumChi.eff.per.pressure.dp[1]) / (larOff2.pumChi.eff.per.pressure.V_flow[2] - larOff2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHotWat.eff.getArrayAsString({(larOff2.pumHotWat.eff.per.pressure.dp[2] - larOff2.pumHotWat.eff.per.pressure.dp[1]) / (larOff2.pumHotWat.eff.per.pressure.V_flow[2] - larOff2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHea.eff.getArrayAsString({(larOff2.pumHea.eff.per.pressure.dp[2] - larOff2.pumHea.eff.per.pressure.dp[1]) / (larOff2.pumHea.eff.per.pressure.V_flow[2] - larOff2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumChi.eff.getArrayAsString({(ret1.pumChi.eff.per.pressure.dp[2] - ret1.pumChi.eff.per.pressure.dp[1]) / (ret1.pumChi.eff.per.pressure.V_flow[2] - ret1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHotWat.eff.getArrayAsString({(ret1.pumHotWat.eff.per.pressure.dp[2] - ret1.pumHotWat.eff.per.pressure.dp[1]) / (ret1.pumHotWat.eff.per.pressure.V_flow[2] - ret1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHea.eff.getArrayAsString({(ret1.pumHea.eff.per.pressure.dp[2] - ret1.pumHea.eff.per.pressure.dp[1]) / (ret1.pumHea.eff.per.pressure.V_flow[2] - ret1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumChi.eff.getArrayAsString({(larOff1.pumChi.eff.per.pressure.dp[2] - larOff1.pumChi.eff.per.pressure.dp[1]) / (larOff1.pumChi.eff.per.pressure.V_flow[2] - larOff1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHotWat.eff.getArrayAsString({(larOff1.pumHotWat.eff.per.pressure.dp[2] - larOff1.pumHotWat.eff.per.pressure.dp[1]) / (larOff1.pumHotWat.eff.per.pressure.V_flow[2] - larOff1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.1.4-maint.8.1.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHea.eff.getArrayAsString({(larOff1.pumHea.eff.per.pressure.dp[2] - larOff1.pumHea.eff.per.pressure.dp[1]) / (larOff1.pumHea.eff.per.pressure.V_flow[2] - larOff1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0142/8.072, allocations: 7.103 MB / 4.048 GB, free: 4.609 MB / 2.029 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01084/8.083, allocations: 3.552 MB / 4.051 GB, free: 4.602 MB / 2.029 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.1031/8.186, allocations: 44.19 MB / 4.094 GB, free: 5.102 MB / 2.045 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0006586/8.187, allocations: 80 kB / 4.094 GB, free: 5.07 MB / 2.045 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.005803/8.192, allocations: 1.427 MB / 4.096 GB, free: 4.727 MB / 2.045 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0006591/8.193, allocations: 0.8613 MB / 4.097 GB, free: 3.875 MB / 2.045 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.09396/8.287, allocations: 38.5 MB / 4.134 GB, free: 10.68 MB / 2.076 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.2928/8.58, allocations: 210.7 MB / 4.34 GB, free: 2.949 MB / 2.264 GB Notification: Performance of preOpt comSubExp (simulation): time 0.1168/8.697, allocations: 39.49 MB / 4.379 GB, free: 12.04 MB / 2.311 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.03045/8.727, allocations: 13.58 MB / 4.392 GB, free: 14.43 MB / 2.326 GB Notification: Performance of preOpt evalFunc (simulation): time 0.101/8.828, allocations: 66.88 MB / 4.457 GB, free: 6.742 MB / 2.389 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.03571/8.864, allocations: 15.31 MB / 4.472 GB, free: 7.309 MB / 2.404 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.01824/8.882, allocations: 2.857 MB / 4.475 GB, free: 4.434 MB / 2.404 GB Notification: Performance of pre-optimization done (n=1811): time 4.755e-05/8.882, allocations: 0 / 4.475 GB, free: 4.434 MB / 2.404 GB Notification: Performance of matching and sorting (n=1811): time 2.074/10.96, allocations: 59.52 MB / 4.533 GB, free: 0.536 GB / 2.405 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002972/10.96, allocations: 1.182 MB / 4.534 GB, free: 0.5348 GB / 2.405 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0916/11.05, allocations: 45.32 MB / 4.579 GB, free: 0.5325 GB / 2.405 GB Notification: Performance of collectPreVariables (initialization): time 0.005234/11.05, allocations: 0.4979 MB / 4.579 GB, free: 0.5325 GB / 2.405 GB Notification: Performance of collectInitialEqns (initialization): time 0.02578/11.08, allocations: 26.52 MB / 4.605 GB, free: 0.5299 GB / 2.405 GB Notification: Performance of collectInitialBindings (initialization): time 0.00755/11.09, allocations: 6.186 MB / 4.611 GB, free: 0.5263 GB / 2.405 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.01086/11.1, allocations: 5.823 MB / 4.617 GB, free: 0.526 GB / 2.405 GB Notification: Performance of setup shared object (initialization): time 3.417e-05/11.1, allocations: 307.9 kB / 4.617 GB, free: 0.5257 GB / 2.405 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.03233/11.13, allocations: 14.89 MB / 4.631 GB, free: 0.5253 GB / 2.405 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.04044/11.17, allocations: 25.26 MB / 4.656 GB, free: 0.5139 GB / 2.405 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.07017/11.24, allocations: 35.62 MB / 4.691 GB, free: 0.5047 GB / 2.405 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0003628/11.24, allocations: 66.22 kB / 4.691 GB, free: 0.5047 GB / 2.405 GB Notification: Performance of matching and sorting (n=3373) (initialization): time 0.1152/11.36, allocations: 46.3 MB / 4.736 GB, free: 0.501 GB / 2.405 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002462/11.36, allocations: 101.9 kB / 4.736 GB, free: 0.501 GB / 2.405 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0004248/11.36, allocations: 228.6 kB / 4.737 GB, free: 0.501 GB / 2.405 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.02069/11.38, allocations: 7.175 MB / 4.744 GB, free: 0.5005 GB / 2.405 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02533/11.4, allocations: 6.312 MB / 4.75 GB, free: 0.5005 GB / 2.405 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02574/11.43, allocations: 21.66 MB / 4.771 GB, free: 498.9 MB / 2.405 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.05018/11.48, allocations: 5.886 MB / 4.777 GB, free: 495.3 MB / 2.405 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.006214/11.49, allocations: 1.365 MB / 4.778 GB, free: 494.3 MB / 2.405 GB Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.05424/11.54, allocations: 23.39 MB / 4.801 GB, free: 482.1 MB / 2.405 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.03865/11.58, allocations: 24.77 MB / 4.825 GB, free: 455.9 MB / 2.405 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.06313/11.64, allocations: 34.62 MB / 4.859 GB, free: 422.1 MB / 2.405 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0002441/11.64, allocations: 71.66 kB / 4.859 GB, free: 422 MB / 2.405 GB Notification: Performance of matching and sorting (n=3373) (initialization_lambda0): time 0.1096/11.75, allocations: 45.32 MB / 4.903 GB, free: 383.5 MB / 2.405 GB Notification: Performance of prepare postOptimizeDAE: time 0.0001794/11.75, allocations: 104 kB / 4.903 GB, free: 383.4 MB / 2.405 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0002765/11.75, allocations: 228 kB / 4.903 GB, free: 383.2 MB / 2.405 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.01875/11.77, allocations: 7.179 MB / 4.91 GB, free: 377.4 MB / 2.405 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02378/11.79, allocations: 6.26 MB / 4.917 GB, free: 372 MB / 2.405 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02492/11.82, allocations: 21.66 MB / 4.938 GB, free: 349.9 MB / 2.405 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.05579/11.88, allocations: 6.051 MB / 4.944 GB, free: 343.9 MB / 2.405 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.007614/11.88, allocations: 1.338 MB / 4.945 GB, free: 342.5 MB / 2.405 GB Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 1046 * Number of states: 0 () * Number of discrete variables: 123 ($PRE.ret2.loa.nextTimeEvent,$whenCondition8,$PRE.apa2.loa.nextTimeEvent,$whenCondition7,$PRE.larOff4.loa.nextTimeEvent,$whenCondition6,$PRE.larOff3.loa.nextTimeEvent,$whenCondition5,$PRE.apa1.loa.nextTimeEvent,$whenCondition4,$PRE.larOff2.loa.nextTimeEvent,$whenCondition3,$PRE.ret1.loa.nextTimeEvent,$whenCondition2,$PRE.larOff1.loa.nextTimeEvent,$whenCondition1,ret2.pumChi.eff.haveDPMax,ret2.pumChi.eff.haveMinimumDecrease,ret2.pumChi.eff.per.havePressureCurve,ret2.pumHotWat.eff.haveDPMax,ret2.pumHotWat.eff.haveMinimumDecrease,ret2.pumHotWat.eff.per.havePressureCurve,ret2.pumHea.eff.haveDPMax,ret2.pumHea.eff.haveMinimumDecrease,ret2.pumHea.eff.per.havePressureCurve,apa2.pumChi.eff.haveDPMax,apa2.pumChi.eff.haveMinimumDecrease,apa2.pumChi.eff.per.havePressureCurve,apa2.pumHotWat.eff.haveDPMax,apa2.pumHotWat.eff.haveMinimumDecrease,apa2.pumHotWat.eff.per.havePressureCurve,apa2.pumHea.eff.haveDPMax,apa2.pumHea.eff.haveMinimumDecrease,apa2.pumHea.eff.per.havePressureCurve,larOff4.pumChi.eff.haveDPMax,larOff4.pumChi.eff.haveMinimumDecrease,larOff4.pumChi.eff.per.havePressureCurve,larOff4.pumHotWat.eff.haveDPMax,larOff4.pumHotWat.eff.haveMinimumDecrease,larOff4.pumHotWat.eff.per.havePressureCurve,larOff4.pumHea.eff.haveDPMax,larOff4.pumHea.eff.haveMinimumDecrease,larOff4.pumHea.eff.per.havePressureCurve,larOff3.pumChi.eff.haveDPMax,larOff3.pumChi.eff.haveMinimumDecrease,larOff3.pumChi.eff.per.havePressureCurve,larOff3.pumHotWat.eff.haveDPMax,larOff3.pumHotWat.eff.haveMinimumDecrease,larOff3.pumHotWat.eff.per.havePressureCurve,larOff3.pumHea.eff.haveDPMax,larOff3.pumHea.eff.haveMinimumDecrease,larOff3.pumHea.eff.per.havePressureCurve,apa1.pumChi.eff.haveDPMax,apa1.pumChi.eff.haveMinimumDecrease,apa1.pumChi.eff.per.havePressureCurve,apa1.pumHotWat.eff.haveDPMax,apa1.pumHotWat.eff.haveMinimumDecrease,apa1.pumHotWat.eff.per.havePressureCurve,apa1.pumHea.eff.haveDPMax,apa1.pumHea.eff.haveMinimumDecrease,apa1.pumHea.eff.per.havePressureCurve,larOff2.pumChi.eff.haveDPMax,larOff2.pumChi.eff.haveMinimumDecrease,larOff2.pumChi.eff.per.havePressureCurve,larOff2.pumHotWat.eff.haveDPMax,larOff2.pumHotWat.eff.haveMinimumDecrease,larOff2.pumHotWat.eff.per.havePressureCurve,larOff2.pumHea.eff.haveDPMax,larOff2.pumHea.eff.haveMinimumDecrease,larOff2.pumHea.eff.per.havePressureCurve,ret1.pumChi.eff.haveDPMax,ret1.pumChi.eff.haveMinimumDecrease,ret1.pumChi.eff.per.havePressureCurve,ret1.pumHotWat.eff.haveDPMax,ret1.pumHotWat.eff.haveMinimumDecrease,ret1.pumHotWat.eff.per.havePressureCurve,ret1.pumHea.eff.haveDPMax,ret1.pumHea.eff.haveMinimumDecrease,ret1.pumHea.eff.per.havePressureCurve,larOff1.pumChi.eff.haveDPMax,larOff1.pumChi.eff.haveMinimumDecrease,larOff1.pumChi.eff.per.havePressureCurve,larOff1.pumHotWat.eff.haveDPMax,larOff1.pumHotWat.eff.haveMinimumDecrease,larOff1.pumHotWat.eff.per.havePressureCurve,larOff1.pumHea.eff.haveDPMax,larOff1.pumHea.eff.haveMinimumDecrease,larOff1.pumHea.eff.per.havePressureCurve,weaDat.conTim.tNext,$PRE.weaDat.conTim.tNext,weaDat.conTimMin.tNext,$PRE.weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,$PRE.ret2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,$PRE.apa2.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,$PRE.larOff4.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,$PRE.larOff3.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,$PRE.apa1.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,$PRE.larOff2.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,$PRE.ret1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,$PRE.larOff1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEvent,$whenCondition9,$whenCondition10,ETheCoo.local_reset,ETheHotWat.local_reset,ETheHea.local_reset,EEleCoo.local_reset,EEleHea.local_reset) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (3013): * Single equations (assignments): 2941 * Array equations: 24 * Algorithm blocks: 0 * Record equations: 24 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 24 systems {(1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11), (1,11)} Notification: Performance of prepare postOptimizeDAE: time 0.01372/11.9, allocations: 1.973 MB / 4.947 GB, free: 340.9 MB / 2.405 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01502/11.91, allocations: 4.607 MB / 4.951 GB, free: 336.2 MB / 2.405 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.1103/12.02, allocations: 50.19 MB / 5 GB, free: 286.7 MB / 2.405 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.000233/12.02, allocations: 247.9 kB / 5.001 GB, free: 286.4 MB / 2.405 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 4.073e-05/12.02, allocations: 12 kB / 5.001 GB, free: 286.4 MB / 2.405 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.08094/12.1, allocations: 31.1 MB / 5.031 GB, free: 255.3 MB / 2.405 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1868/12.29, allocations: 91.28 MB / 5.12 GB, free: 164.1 MB / 2.405 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 8.228e-05/12.29, allocations: 29 kB / 5.12 GB, free: 164 MB / 2.405 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.0176/12.31, allocations: 3.992 MB / 5.124 GB, free: 160.2 MB / 2.405 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.01944/12.33, allocations: 6.945 MB / 5.131 GB, free: 153.2 MB / 2.405 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002107/12.33, allocations: 0.562 MB / 5.131 GB, free: 152.7 MB / 2.405 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02474/12.35, allocations: 21.43 MB / 5.152 GB, free: 130.8 MB / 2.405 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.323e-05/12.35, allocations: 49.19 kB / 5.152 GB, free: 130.7 MB / 2.405 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.13/12.48, allocations: 58.8 MB / 5.21 GB, free: 71.41 MB / 2.405 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02098/12.5, allocations: 8.738 MB / 5.218 GB, free: 62.59 MB / 2.405 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.0116/12.52, allocations: 395.8 kB / 5.219 GB, free: 62.2 MB / 2.405 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.0392/12.56, allocations: 4.125 MB / 5.223 GB, free: 58.07 MB / 2.405 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001989/12.56, allocations: 1.275 MB / 5.224 GB, free: 56.82 MB / 2.405 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.002533/12.56, allocations: 0.9211 MB / 5.225 GB, free: 55.89 MB / 2.405 GB Notification: Performance of sorting global known variables: time 0.05562/12.62, allocations: 30.76 MB / 5.255 GB, free: 25.4 MB / 2.405 GB Notification: Performance of sort global known variables: time 3.41e-07/12.62, allocations: 0 / 5.255 GB, free: 25.4 MB / 2.405 GB Notification: Performance of remove unused functions: time 0.07248/12.69, allocations: 24.03 MB / 5.278 GB, free: 1.781 MB / 2.405 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 129 * Number of states: 5 (EEleHea.y,EEleCoo.y,ETheHea.y,ETheHotWat.y,ETheCoo.y) * Number of discrete variables: 28 ($whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,larOff1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,ret2.loa.nextTimeEventScaled,weaDat.conTimMin.tNext,weaDat.conTim.tNext) * Number of discrete states: 18 (ret2.loa.nextTimeEvent,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEvent,weaDat.conTim.tNext,weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,apa2.loa.nextTimeEventScaled,larOff4.loa.nextTimeEventScaled,larOff3.loa.nextTimeEventScaled,apa1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEventScaled,ret1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEventScaled) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (1761): * Single equations (assignments): 1599 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 120 * When equations: 18 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 24 systems {(1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12), (1,12)} Notification: Performance of Backend phase and start with SimCode phase: time 0.5493/13.24, allocations: 64.79 MB / 5.342 GB, free: 1.577 GB / 2.467 GB Notification: Performance of simCode: created initialization part: time 0.1201/13.36, allocations: 53.24 MB / 5.394 GB, free: 1.575 GB / 2.467 GB Notification: Performance of simCode: created event and clocks part: time 3.557e-05/13.36, allocations: 24.33 kB / 5.394 GB, free: 1.575 GB / 2.467 GB Notification: Performance of simCode: created simulation system equations: time 0.03393/13.39, allocations: 14.81 MB / 5.408 GB, free: 1.575 GB / 2.467 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.1074/13.5, allocations: 22.62 MB / 5.43 GB, free: 1.571 GB / 2.467 GB Warning: Could not resolve URI (uri) at compile-time; copying all loaded packages into the FMU Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 3.333/16.83, allocations: 1.269 GB / 6.699 GB, free: 389.5 MB / 2.467 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.02504/16.86, allocations: 20.89 MB / 6.719 GB, free: 372.2 MB / 2.467 GB Notification: Performance of simCode: alias equations: time 0.04725/16.9, allocations: 10.91 MB / 6.73 GB, free: 361.8 MB / 2.467 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.03136/16.94, allocations: 25.99 MB / 6.755 GB, free: 335.8 MB / 2.467 GB Notification: Performance of SimCode: time 6.61e-07/16.94, allocations: 0 / 6.755 GB, free: 335.8 MB / 2.467 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 6.565/23.5, allocations: 1.232 GB / 7.988 GB, free: 1.362 GB / 2.467 GB Notification: Performance of buildModelFMU: configured platform static using cached values: time 0.0001793/23.5, allocations: 353 kB / 7.988 GB, free: 1.361 GB / 2.467 GB Notification: Performance of buildModelFMU: Generate platform static: time 43.8/67.3, allocations: 0 / 7.988 GB, free: 1.361 GB / 2.467 GB (rm -f Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe ; mkfifo Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe ; head -c 1048576 < Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe >> ../files/Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.sim & /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --tempDir=temp_Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_fmu --startTime=0 --stopTime=3.1536e+07 --timeout=50 --tolerance=1e-06 Buildings_8_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase.fmu > Buildings_8_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.pipe 2>&1)