Environment - simulationEnvironment:
startTime=1.5552e+07
stopTime=1.5984e+07
tolerance=1e-06
numberOfIntervals=2500
stepSize=172.8
Regular simulation: ./Buildings_10_Buildings.Fluid.HeatExchangers.CoolingTowers.Examples.FixedApproachWetBulb  -abortSlowSimulation -alarm=480  -emit_protected -lv LOG_STATS
assert            | warning | The following assertion has been violated during initialization at time 15552000.000000
|                 | |       | not (pum.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pum.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.CoolingTowers.Examples.FixedApproachWetBulb.pum: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 15552000.000000
|                 | |       | pum.per.haveWMot_nominal or not (pum.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pum.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.CoolingTowers.Examples.FixedApproachWetBulb.pum: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |     0.011823s          reading init.xml
|                 | |       | | |   0.00119891s          reading info.xml
|                 | |       | | |   0.00037836s [  0.1%] pre-initialization
|                 | |       | | |    0.0322516s [  7.3%] initialization
|                 | |       | | |   4.1829e-05s [  0.0%] steps
|                 | |       | | |     0.052153s [ 11.7%] solver (excl. callbacks)
|                 | |       | | |   0.00269658s [  0.6%] creating output-file
|                 | |       | | |     0.114897s [ 25.8%] event-handling
|                 | |       | | |      0.01135s [  2.6%] overhead
|                 | |       | | |     0.231077s [ 51.9%] simulation
|                 | |       | | |     0.444845s [100.0%] total
|                 | |       | | events
|                 | |       | | |   637 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | | 73162 steps taken
|                 | |       | | | 89346 calls of functionODE
|                 | |       | | | 16060 evaluations of jacobian
|                 | |       | | |   786 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 0.0721056s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.