Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0004401/0.0004401, allocations: 20.45 kB / 9.884 MB, free: 0.8086 MB / 10.45 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.001154/0.001594, allocations: 429.8 kB / 10.3 MB, free: 400 kB / 10.45 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180] "[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.5682/0.5682, allocations: 100.7 MB / 111.7 MB, free: 15.07 MB / 122.8 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.1171/0.6852, allocations: 28.1 MB / 139.8 MB, free: 6.23 MB / 138.8 MB " [Timeout remaining time 179] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo): time 0.06263/0.06263, allocations: 16.03 MB / 156.7 MB, free: 5.758 MB / 154.8 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.01128/0.07391, allocations: 6.789 MB / 163.5 MB, free: 14.95 MB / 170.8 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0007316/0.0007316, allocations: 81.55 kB / 164.3 MB, free: 14.14 MB / 170.8 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.002658/0.00339, allocations: 451.5 kB / 164.8 MB, free: 13.7 MB / 170.8 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.005335/0.005335, allocations: 144.7 kB / 165.7 MB, free: 12.82 MB / 170.8 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.001747/0.007082, allocations: 490.9 kB / 166.1 MB, free: 12.34 MB / 170.8 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9859/0.9859, allocations: 177.1 MB / 344 MB, free: 6.086 MB / 330.8 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.09411/1.08, allocations: 53.67 MB / 397.7 MB, free: 324 kB / 378.8 MB " [Timeout remaining time 179] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 2.036/2.036, allocations: 376.9 MB / 0.7572 GB, free: 10.3 MB / 0.7293 GB Notification: Performance of NFInstanceAPI.mkTop(): time 0.2327/2.269, allocations: 123.2 MB / 0.8775 GB, free: 15.1 MB / 0.8543 GB " [Timeout remaining time 178] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo", uses=false) [Timeout 180] "[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different. Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo): time 1.918/1.918, allocations: 241.5 MB / 1.114 GB, free: 3.199 MB / 1.058 GB Notification: Performance of NFInstanceAPI.mkTop(): time 0.147/2.065, allocations: 70.6 MB / 1.183 GB, free: 16 kB / 1.12 GB " [Timeout remaining time 178] Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo) Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo) Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo) Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo) Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo) Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo) Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo) Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo) Running command: translateModel(TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF") translateModel(TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF") [Timeout 660] "Notification: Performance of FrontEnd - loaded program: time 2.054e-06/2.054e-06, allocations: 0 / 1.185 GB, free: 14.27 MB / 1.136 GB Notification: Performance of FrontEnd - Absyn->SCode: time 3.433e-05/3.639e-05, allocations: 6.25 kB / 1.185 GB, free: 14.27 MB / 1.136 GB Notification: Performance of NFInst.instantiate(TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF): time 0.004764/0.0048, allocations: 2.764 MB / 1.187 GB, free: 11.49 MB / 1.136 GB Notification: Performance of NFInst.instExpressions: time 0.001665/0.006466, allocations: 0.7281 MB / 1.188 GB, free: 10.75 MB / 1.136 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.0001967/0.006662, allocations: 7.938 kB / 1.188 GB, free: 10.75 MB / 1.136 GB Notification: Performance of NFTyping.typeComponents: time 0.0003028/0.006965, allocations: 47.45 kB / 1.188 GB, free: 10.7 MB / 1.136 GB Notification: Performance of NFTyping.typeBindings: time 0.0002503/0.007215, allocations: 63.5 kB / 1.188 GB, free: 10.64 MB / 1.136 GB Notification: Performance of NFTyping.typeClassSections: time 0.0005625/0.007778, allocations: 179.6 kB / 1.188 GB, free: 10.46 MB / 1.136 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:52:3-52:54:writable] Warning: Parameter k_turbine has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:53:3-53:52:writable] Warning: Parameter J has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:54:3-54:53:writable] Warning: Parameter lambdaOpt has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:55:3-55:52:writable] Warning: Parameter rho has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:56:3-56:59:writable] Warning: Parameter radius has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:57:3-57:50:writable] Warning: Parameter cp_opt has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:58:3-58:28:writable] Warning: Parameter tau_n has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:62:3-62:51:writable] Warning: Parameter v_cutIn has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Producer/Electrical/Wind/Controller/TorqueController_SI_deltaF.mo:63:3-63:56:writable] Warning: Parameter v_fullLoad has neither value nor start value, and is fixed during initialization (fixed=true). [Non-standard Modelica: --allowNonStandardModelica=implicitParameterStartAttribute] Notification: Performance of NFFlatten.flatten: time 0.0004672/0.008245, allocations: 293.9 kB / 1.189 GB, free: 10.18 MB / 1.136 GB Notification: Performance of NFFlatten.resolveConnections: time 0.0001935/0.008439, allocations: 78.56 kB / 1.189 GB, free: 10.1 MB / 1.136 GB Notification: Performance of NFEvalConstants.evaluate: time 0.0004295/0.008868, allocations: 208.1 kB / 1.189 GB, free: 9.898 MB / 1.136 GB Notification: Performance of NFSimplifyModel.simplify: time 0.0002166/0.009085, allocations: 107.7 kB / 1.189 GB, free: 9.793 MB / 1.136 GB Notification: Performance of NFPackage.collectConstants: time 5.074e-05/0.009135, allocations: 20 kB / 1.189 GB, free: 9.773 MB / 1.136 GB Notification: Performance of NFFlatten.collectFunctions: time 4.261e-05/0.009178, allocations: 24 kB / 1.189 GB, free: 9.75 MB / 1.136 GB Notification: Performance of NFScalarize.scalarize: time 7.957e-05/0.009258, allocations: 43.81 kB / 1.189 GB, free: 9.707 MB / 1.136 GB Notification: Performance of NFVerifyModel.verify: time 0.0001005/0.009358, allocations: 59.81 kB / 1.189 GB, free: 9.648 MB / 1.136 GB Notification: Performance of NFConvertDAE.convert: time 0.000366/0.009724, allocations: 187.1 kB / 1.189 GB, free: 9.465 MB / 1.136 GB Notification: Performance of FrontEnd - DAE generated: time 2.081e-05/0.009745, allocations: 0 / 1.189 GB, free: 9.465 MB / 1.136 GB Notification: Performance of FrontEnd: time 1.293e-06/0.009746, allocations: 4 kB / 1.189 GB, free: 9.461 MB / 1.136 GB Notification: Performance of Transformations before backend: time 2.307e-05/0.009769, allocations: 0 / 1.189 GB, free: 9.461 MB / 1.136 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 48 * Number of variables: 48 Notification: Performance of Generate backend data structure: time 0.001022/0.01079, allocations: 0.5463 MB / 1.19 GB, free: 8.891 MB / 1.136 GB Notification: Performance of prepare preOptimizeDAE: time 3.825e-05/0.01083, allocations: 8.031 kB / 1.19 GB, free: 8.883 MB / 1.136 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 8.146e-05/0.01091, allocations: 40.91 kB / 1.19 GB, free: 8.844 MB / 1.136 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.000399/0.01131, allocations: 237.2 kB / 1.19 GB, free: 8.578 MB / 1.136 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 3.448e-05/0.01134, allocations: 16.88 kB / 1.19 GB, free: 8.562 MB / 1.136 GB Notification: Performance of preOpt expandDerOperator (simulation): time 4.508e-05/0.01139, allocations: 24.38 kB / 1.19 GB, free: 8.539 MB / 1.136 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.0004168/0.01181, allocations: 312.3 kB / 1.191 GB, free: 8.184 MB / 1.136 GB Notification: Performance of preOpt findStateOrder (simulation): time 1.156e-05/0.01182, allocations: 192 / 1.191 GB, free: 8.184 MB / 1.136 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 2.331e-05/0.01184, allocations: 8.375 kB / 1.191 GB, free: 8.176 MB / 1.136 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 1.215e-05/0.01185, allocations: 11.94 kB / 1.191 GB, free: 8.164 MB / 1.136 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.0001513/0.01201, allocations: 64.3 kB / 1.191 GB, free: 8.105 MB / 1.136 GB Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0009034/0.01291, allocations: 480.1 kB / 1.191 GB, free: 7.609 MB / 1.136 GB Notification: Performance of preOpt comSubExp (simulation): time 0.0003821/0.01329, allocations: 185.5 kB / 1.191 GB, free: 7.406 MB / 1.136 GB Notification: Performance of preOpt resolveLoops (simulation): time 6.477e-05/0.01336, allocations: 41.64 kB / 1.191 GB, free: 7.359 MB / 1.136 GB Notification: Performance of preOpt evalFunc (simulation): time 3.336e-05/0.01339, allocations: 4 kB / 1.191 GB, free: 7.355 MB / 1.136 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 3.411e-05/0.01342, allocations: 38.56 kB / 1.191 GB, free: 7.309 MB / 1.136 GB Notification: Performance of pre-optimization done (n=20): time 3.176e-06/0.01343, allocations: 0 / 1.191 GB, free: 7.309 MB / 1.136 GB Notification: Performance of matching and sorting (n=20): time 0.0003144/0.01374, allocations: 131.6 kB / 1.191 GB, free: 7.176 MB / 1.136 GB Notification: Performance of inlineWhenForInitialization (initialization): time 4.993e-05/0.01379, allocations: 81.11 kB / 1.192 GB, free: 7.078 MB / 1.136 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0002269/0.01402, allocations: 233 kB / 1.192 GB, free: 6.84 MB / 1.136 GB Notification: Performance of collectPreVariables (initialization): time 3.601e-05/0.01405, allocations: 37.64 kB / 1.192 GB, free: 6.797 MB / 1.136 GB Notification: Performance of collectInitialEqns (initialization): time 9.141e-05/0.01414, allocations: 152.8 kB / 1.192 GB, free: 6.645 MB / 1.136 GB Notification: Performance of collectInitialBindings (initialization): time 6.061e-05/0.01421, allocations: 75.53 kB / 1.192 GB, free: 6.57 MB / 1.136 GB Notification: Performance of simplifyInitialFunctions (initialization): time 8.111e-05/0.01429, allocations: 45.64 kB / 1.192 GB, free: 6.52 MB / 1.136 GB Notification: Performance of setup shared object (initialization): time 0.0001322/0.01442, allocations: 342.8 kB / 1.192 GB, free: 6.176 MB / 1.136 GB Notification: Performance of preBalanceInitialSystem (initialization): time 6.782e-05/0.01449, allocations: 35.67 kB / 1.192 GB, free: 6.137 MB / 1.136 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.0001396/0.01463, allocations: 174.7 kB / 1.193 GB, free: 5.926 MB / 1.136 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.0002105/0.01484, allocations: 115 kB / 1.193 GB, free: 5.809 MB / 1.136 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 3.637e-06/0.01484, allocations: 3.938 kB / 1.193 GB, free: 5.805 MB / 1.136 GB Notification: Performance of matching and sorting (n=26) (initialization): time 0.000223/0.01506, allocations: 117.6 kB / 1.193 GB, free: 5.684 MB / 1.136 GB Notification: Performance of prepare postOptimizeDAE: time 2.093e-05/0.01508, allocations: 10.19 kB / 1.193 GB, free: 5.676 MB / 1.136 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 8.476e-06/0.01509, allocations: 4 kB / 1.193 GB, free: 5.672 MB / 1.136 GB Notification: Performance of postOpt tearingSystem (initialization): time 1.409e-05/0.01511, allocations: 4.031 kB / 1.193 GB, free: 5.668 MB / 1.136 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0001915/0.0153, allocations: 47.92 kB / 1.193 GB, free: 5.621 MB / 1.136 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 6.062e-06/0.0153, allocations: 7.938 kB / 1.193 GB, free: 5.613 MB / 1.136 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0001351/0.01544, allocations: 31.86 kB / 1.193 GB, free: 5.582 MB / 1.136 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 1.484e-05/0.01545, allocations: 4 kB / 1.193 GB, free: 5.578 MB / 1.136 GB Warning: Assuming fixed start value for the following 2 variables: firstOrder.y:VARIABLE(flow=false start = firstOrder.y_start fixed = true ) \"Connector of Real output signal\" type: Real add_Inertia.x_scaled[1]:VARIABLE(fixed = true protected = true ) \"Scaled vector x\" type: Real [1] Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0002079/0.01566, allocations: 121.7 kB / 1.193 GB, free: 5.453 MB / 1.136 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.0001505/0.01581, allocations: 176.7 kB / 1.193 GB, free: 5.238 MB / 1.136 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.0001617/0.01597, allocations: 108.3 kB / 1.193 GB, free: 5.133 MB / 1.136 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 1.403e-06/0.01598, allocations: 0 / 1.193 GB, free: 5.133 MB / 1.136 GB Notification: Performance of matching and sorting (n=26) (initialization_lambda0): time 0.0001992/0.01617, allocations: 129.4 kB / 1.193 GB, free: 5 MB / 1.136 GB Notification: Performance of prepare postOptimizeDAE: time 1.254e-05/0.01619, allocations: 8 kB / 1.193 GB, free: 4.992 MB / 1.136 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 2.505e-06/0.01619, allocations: 0 / 1.193 GB, free: 4.992 MB / 1.136 GB Notification: Performance of postOpt tearingSystem (initialization): time 4.349e-06/0.01619, allocations: 0 / 1.193 GB, free: 4.992 MB / 1.136 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0001443/0.01634, allocations: 39.98 kB / 1.193 GB, free: 4.953 MB / 1.136 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 5.731e-06/0.01634, allocations: 7.938 kB / 1.193 GB, free: 4.945 MB / 1.136 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0001348/0.01648, allocations: 35.91 kB / 1.194 GB, free: 4.91 MB / 1.136 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 1.26e-05/0.01649, allocations: 4 kB / 1.194 GB, free: 4.906 MB / 1.136 GB Warning: Assuming fixed start value for the following 2 variables: firstOrder.y:VARIABLE(flow=false start = firstOrder.y_start fixed = true ) \"Connector of Real output signal\" type: Real add_Inertia.x_scaled[1]:VARIABLE(fixed = true protected = true ) \"Scaled vector x\" type: Real [1] Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 2 * Number of states: 0 () * Number of discrete variables: 5 ($PRE.torqueControllerDisabled1.y,$PRE.torqueControllerDisabled.y,torqueControllerDisabled1.y,greaterThreshold.y,torqueControllerDisabled.y) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (26): * Single equations (assignments): 26 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 0 * Mixed (continuous/discrete) equation systems: 0 Notification: Performance of prepare postOptimizeDAE: time 0.0001457/0.01664, allocations: 200.3 kB / 1.194 GB, free: 4.703 MB / 1.136 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 6.682e-05/0.0167, allocations: 19.92 kB / 1.194 GB, free: 4.684 MB / 1.136 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.0002446/0.01695, allocations: 127.7 kB / 1.194 GB, free: 4.547 MB / 1.136 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 5.4e-06/0.01695, allocations: 4 kB / 1.194 GB, free: 4.543 MB / 1.136 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 2.445e-06/0.01696, allocations: 0 / 1.194 GB, free: 4.543 MB / 1.136 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 5.8e-06/0.01696, allocations: 0 / 1.194 GB, free: 4.543 MB / 1.136 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0003015/0.01726, allocations: 149.7 kB / 1.194 GB, free: 4.379 MB / 1.136 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 3.978e-06/0.01727, allocations: 8 kB / 1.194 GB, free: 4.371 MB / 1.136 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.0001735/0.01744, allocations: 31.98 kB / 1.194 GB, free: 4.34 MB / 1.136 GB Notification: Performance of postOpt removeConstants (simulation): time 4.911e-05/0.01749, allocations: 31.69 kB / 1.194 GB, free: 4.309 MB / 1.136 GB Notification: Performance of postOpt tearingSystem (simulation): time 3.817e-06/0.01749, allocations: 0 / 1.194 GB, free: 4.309 MB / 1.136 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 2.745e-05/0.01752, allocations: 15.92 kB / 1.194 GB, free: 4.293 MB / 1.136 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 4.108e-06/0.01753, allocations: 4 kB / 1.194 GB, free: 4.289 MB / 1.136 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.913e-06/0.01753, allocations: 0 / 1.194 GB, free: 4.289 MB / 1.136 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.0003911/0.01792, allocations: 361.8 kB / 1.194 GB, free: 3.922 MB / 1.136 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 4.585e-05/0.01796, allocations: 8 kB / 1.194 GB, free: 3.914 MB / 1.136 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.0001851/0.01815, allocations: 28.02 kB / 1.194 GB, free: 3.887 MB / 1.136 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 6.902e-05/0.01822, allocations: 19.95 kB / 1.194 GB, free: 3.867 MB / 1.136 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 1.192e-05/0.01823, allocations: 7.984 kB / 1.195 GB, free: 3.859 MB / 1.136 GB Notification: Performance of sorting global known variables: time 0.0001089/0.01834, allocations: 78.78 kB / 1.195 GB, free: 3.781 MB / 1.136 GB Notification: Performance of sort global known variables: time 3.41e-07/0.01834, allocations: 3.938 kB / 1.195 GB, free: 3.777 MB / 1.136 GB Notification: Performance of remove unused functions: time 0.0003817/0.01872, allocations: 91.78 kB / 1.195 GB, free: 3.688 MB / 1.136 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 2 * Number of states: 2 (firstOrder.y,add_Inertia.x_scaled[1]) * Number of discrete variables: 3 (torqueControllerDisabled.y,greaterThreshold.y,torqueControllerDisabled1.y) * Number of discrete states: 2 (torqueControllerDisabled1.y,torqueControllerDisabled.y) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (20): * Single equations (assignments): 20 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 0 * Mixed (continuous/discrete) equation systems: 0 Notification: Performance of Backend phase and start with SimCode phase: time 0.0001667/0.01889, allocations: 92.34 kB / 1.195 GB, free: 3.59 MB / 1.136 GB Notification: Performance of simCode: created initialization part: time 0.0003127/0.0192, allocations: 153.5 kB / 1.195 GB, free: 3.434 MB / 1.136 GB Notification: Performance of simCode: created event and clocks part: time 1.439e-05/0.01922, allocations: 8.125 kB / 1.195 GB, free: 3.426 MB / 1.136 GB Notification: Performance of simCode: created simulation system equations: time 8.841e-05/0.0193, allocations: 50.97 kB / 1.195 GB, free: 3.375 MB / 1.136 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0004379/0.01974, allocations: 78.09 kB / 1.195 GB, free: 3.301 MB / 1.136 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.001928/0.02167, allocations: 0.5161 MB / 1.196 GB, free: 2.75 MB / 1.136 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 9.187e-05/0.02176, allocations: 88.81 kB / 1.196 GB, free: 2.645 MB / 1.136 GB Notification: Performance of simCode: alias equations: time 0.0001512/0.02191, allocations: 29.61 kB / 1.196 GB, free: 2.617 MB / 1.136 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0002126/0.02213, allocations: 99.33 kB / 1.196 GB, free: 2.52 MB / 1.136 GB Notification: Performance of SimCode: time 1.944e-06/0.02213, allocations: 4 kB / 1.196 GB, free: 2.516 MB / 1.136 GB Notification: Performance of Templates: time 0.008281/0.03041, allocations: 3.696 MB / 1.199 GB, free: 14.9 MB / 1.151 GB " [Timeout remaining time 660] make -j1 -f TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.makefile [Timeout 660] (rm -f TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.pipe ; mkfifo TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.pipe >> ../files/TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.sim & ./TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF -abortSlowSimulation -alarm=240 -lv LOG_STATS > TransiEnt_TransiEnt.Producer.Electrical.Wind.Controller.TorqueController_SI_deltaF.pipe 2>&1) [Timeout 240] [Calling os._exit(0), Time elapsed: 7.781107984483242]