Environment - simulationEnvironment:
startTime=3.024e+06
stopTime=3.456e+06
tolerance=1e-06
numberOfIntervals=3474
stepSize=124.352
Regular simulation: ./Buildings_latest_Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage -abortSlowSimulation -alarm=240 -s gbode -gbm=radauIIA3 -emit_protected -lv LOG_STATS
LOG_STDOUT        | warning | Numerical Jacobians without coloring are currently not supported by GBODE. Colored numerical Jacobian will be used.
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumChiWat.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumChiWat.pum.etaHyd, has value: -1.048e-32"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumHeaWat.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumHeaWat.pum.etaHyd, has value: -7.55987e-34"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumConWatCon.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCon.pum.etaHyd, has value: -9.3058e-37"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumConWatEva.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatEva.pum.etaHyd, has value: -2.55553e-32"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.ports_aCon[1].m_flow >= 0.0 and disHea.ports_aCon[1].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.ports_aCon[1].m_flow <= 1e5, has value: -1.86564e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.ports_aCon[2].m_flow >= 0.0 and disHea.ports_aCon[2].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.ports_aCon[2].m_flow <= 1e5, has value: -1.61433e-17"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.mCon_flow[1] >= 0.0 and disHea.mCon_flow[1] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.mCon_flow[1] <= 1e5, has value: -1.86564e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.mCon_flow[2] >= 0.0 and disHea.mCon_flow[2] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.mCon_flow[2] <= 1e5, has value: -1.61433e-17"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.con[1].pipDisSup.m_flow >= 0.0 and disHea.con[1].pipDisSup.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.con[1].pipDisSup.m_flow <= 1e5, has value: -2.02707e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.con[1].pipDisRet.m_flow >= 0.0 and disHea.con[1].pipDisRet.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.con[1].pipDisRet.m_flow <= 1e5, has value: -2.02707e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disCoo.ports_aCon[1].m_flow >= 0.0 and disCoo.ports_aCon[1].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.ports_aCon[1].m_flow <= 1e5, has value: -2.05142e-15"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disCoo.mCon_flow[1] >= 0.0 and disCoo.mCon_flow[1] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.mCon_flow[1] <= 1e5, has value: -2.05142e-15"
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000023
|                 | |       | ((pla.heaPum.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.heaPum.pum.etaHyd, has value: -2.69951e-33"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024030.000000
|                 | |       | ((disCoo.ports_aCon[2].m_flow >= 0.0 and disCoo.ports_aCon[2].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.ports_aCon[2].m_flow <= 1e5, has value: -7.53901e-26"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024030.000000
|                 | |       | ((disCoo.mCon_flow[2] >= 0.0 and disCoo.mCon_flow[2] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.mCon_flow[2] <= 1e5, has value: -7.53901e-26"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024030.000000
|                 | |       | ((disCoo.con[1].pipDisSup.m_flow >= 0.0 and disCoo.con[1].pipDisSup.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.con[1].pipDisSup.m_flow <= 1e5, has value: -1.5078e-25"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024030.000000
|                 | |       | ((disCoo.con[1].pipDisRet.m_flow >= 0.0 and disCoo.con[1].pipDisRet.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.con[1].pipDisRet.m_flow <= 1e5, has value: -1.5078e-25"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024915.646352
|                 | |       | ((loaHea[1].bui.disFloHea.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[1].bui.disFloHea.pumFlo.etaHyd, has value: -0.0426998"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024915.646352
|                 | |       | ((loaHea[1].bui.disFloHea.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[1].bui.disFloHea.pumFlo.eff.yMot, has value: -0.038471"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024915.646352
|                 | |       | ((loaHea[2].bui.disFloHea.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[2].bui.disFloHea.pumFlo.etaHyd, has value: -0.042699"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024915.646352
|                 | |       | ((loaHea[2].bui.disFloHea.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[2].bui.disFloHea.pumFlo.eff.yMot, has value: -0.0384658"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((loaHea[1].bui.terUniHea.port_bHeaWat.m_flow >= -1e5 and loaHea[1].bui.terUniHea.port_bHeaWat.m_flow <= 0.0)) --> "Variable violating min/max constraint: -1e5 <= loaHea[1].bui.terUniHea.port_bHeaWat.m_flow <= 0.0, has value: 3.07751e-32"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialFourPortInterface.mo:23:3-24:84:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((loaHea[1].bui.terUniHea.hex.m1_flow >= 0.0 and loaHea[1].bui.terUniHea.hex.m1_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaHea[1].bui.terUniHea.hex.m1_flow <= 1e5, has value: -3.85186e-34"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((loaHea[1].bui.disFloHea.m_flow >= 0.0 and loaHea[1].bui.disFloHea.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaHea[1].bui.disFloHea.m_flow <= 1e5, has value: -3.07751e-32"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((loaHea[2].bui.terUniHea.port_bHeaWat.m_flow >= -1e5 and loaHea[2].bui.terUniHea.port_bHeaWat.m_flow <= 0.0)) --> "Variable violating min/max constraint: -1e5 <= loaHea[2].bui.terUniHea.port_bHeaWat.m_flow <= 0.0, has value: 3.07751e-32"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialFourPortInterface.mo:23:3-24:84:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((loaHea[2].bui.terUniHea.hex.m1_flow >= 0.0 and loaHea[2].bui.terUniHea.hex.m1_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaHea[2].bui.terUniHea.hex.m1_flow <= 1e5, has value: -3.85186e-34"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((loaHea[2].bui.disFloHea.m_flow >= 0.0 and loaHea[2].bui.disFloHea.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaHea[2].bui.disFloHea.m_flow <= 1e5, has value: -3.07751e-32"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Blocks/Interfaces.mo:329:5-330:56:writable]
|                 | |       | The following assertion has been violated at time 3025989.637306
|                 | |       | ((pla.valConWatEvaMix.actPos.y >= 0.0 and pla.valConWatEvaMix.actPos.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valConWatEvaMix.actPos.y <= 1.0, has value: -9.33737e-26"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3027640.133886
|                 | |       | ((pla.pumChiWat.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumChiWat.pum.eff.yMot, has value: -8.8691e-60"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3028849.740933
|                 | |       | ((pla.pumConWatCon.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCon.pum.eff.yMot, has value: -2.29077e-194"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3028849.740933
|                 | |       | ((pla.heaPum.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.heaPum.pum.eff.yMot, has value: -2.29077e-194"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/HeatExchangers/WetCoilEffectivenessNTU.mo:78:3-83:35:writable]
|                 | |       | The following assertion has been violated at time 3049119.170984
|                 | |       | ((loaCoo[1].bui.terUniCoo.hexWetNtu.SHR >= 0.0 and loaCoo[1].bui.terUniCoo.hexWetNtu.SHR <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[1].bui.terUniCoo.hexWetNtu.SHR <= 1.0, has value: -4.76455e-26"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/HeatExchangers/WetCoilEffectivenessNTU.mo:78:3-83:35:writable]
|                 | |       | The following assertion has been violated at time 3049119.170984
|                 | |       | ((loaCoo[2].bui.terUniCoo.hexWetNtu.SHR >= 0.0 and loaCoo[2].bui.terUniCoo.hexWetNtu.SHR <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[2].bui.terUniCoo.hexWetNtu.SHR <= 1.0, has value: -4.76455e-26"
LOG_ASSERT        | debug   | Solving non-linear system 21137 failed at time=3049903.33735815.
|                 | |       | For more information please use -lv LOG_NLS.
LOG_ASSERT        | debug   | Solving non-linear system 21137 failed at time=3049903.33730247.
|                 | |       | For more information please use -lv LOG_NLS.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Blocks/Interfaces.mo:329:5-330:56:writable]
|                 | |       | The following assertion has been violated at time 3058950.520874
|                 | |       | ((pla.valBypTan.actPos.y >= 0.0 and pla.valBypTan.actPos.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valBypTan.actPos.y <= 1.0, has value: -3.61914e-24"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/HeatExchangers/CoolingTowers/BaseClasses/Merkel.mo:68:3-69:53:writable]
|                 | |       | The following assertion has been violated at time 3062051.813472
|                 | |       | ((pla.coo.coo.per.FRWat >= 0.0 and pla.coo.coo.per.FRWat <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.coo.coo.per.FRWat <= 1.0, has value: -5.9974e-14"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3062051.813472
|                 | |       | ((pla.pumConWatCoo.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCoo.pum.etaHyd, has value: -5.49459e-27"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3062176.165803
|                 | |       | ((pla.pumConWatCoo.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCoo.pum.eff.yMot, has value: -6.13136e-177"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Actuators/BaseClasses/ActuatorSignal.mo:23:3-30:26:writable]
|                 | |       | The following assertion has been violated at time 3083404.410237
|                 | |       | ((pla.valBypTan.res3.y >= 0.0 and pla.valBypTan.res3.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valBypTan.res3.y <= 1.0, has value: -4.88498e-15"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135755.309833
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 271815 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135755.309833
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 271814 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135755.309833
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 271814 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135755.309833
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 271814 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135755.309833
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 271814 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135755.309833
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 271814 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 761909 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 715596 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 761909 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 715596 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 761909 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 715596 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 715596 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 761909 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 715596 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 761909 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 715596 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 761909 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | ((loaCoo[1].bui.disFloCoo.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[1].bui.disFloCoo.pumFlo.etaHyd, has value: -0.0194235"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | ((loaCoo[1].bui.disFloCoo.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[1].bui.disFloCoo.pumFlo.eff.yMot, has value: -0.412988"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | ((loaCoo[2].bui.disFloCoo.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[2].bui.disFloCoo.pumFlo.etaHyd, has value: -0.0194242"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3135763.562968
|                 | |       | ((loaCoo[2].bui.disFloCoo.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[2].bui.disFloCoo.pumFlo.eff.yMot, has value: -0.412988"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06087e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.01456e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 478.779 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06087e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.01456e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 478.779 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06087e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.01456e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 478.779 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 478.779 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.01456e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06087e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 478.779 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.01456e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135779.462659
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06087e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135792.746114
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1354e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135792.746114
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08909e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135792.746114
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 574.438 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3135792.746114
|                 | |       | ((pla.pumConWatEva.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatEva.pum.eff.yMot, has value: -6.77011e-167"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13677e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.09046e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 627.062 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.17996e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13365e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 629.224 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.17996e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13365e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 629.224 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.17996e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13365e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 629.224 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 629.224 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13365e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.17996e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 629.224 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.13365e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135800.355712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.17996e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.21411e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.16779e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 843.097 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.21411e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.16779e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 843.097 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 843.097 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.16779e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.21411e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 843.097 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.16779e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.21411e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.21411e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.16779e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135830.055712
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 843.097 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135917.098446
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24511e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135917.098446
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1988e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135917.098446
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 1448.18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 2.1554e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 2.10909e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 2295.24 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | error   | No event found, but assert was triggered. Throwing now!
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |            0s          reading init.xml
|                 | |       | | |            0s          reading info.xml
|                 | |       | | |    9.029e-05s [  0.0%] pre-initialization
|                 | |       | | |    0.0315443s [  0.2%] initialization
|                 | |       | | |            0s [  0.0%] steps
|                 | |       | | |            0s [  0.0%] solver (excl. callbacks)
|                 | |       | | |    0.0117656s [  0.1%] creating output-file
|                 | |       | | |     0.192753s [  1.3%] event-handling
|                 | |       | | |            0s [  0.0%] overhead
|                 | |       | | |      14.9992s [ 98.4%] simulation
|                 | |       | | |      15.2354s [100.0%] total
|                 | |       | | events
|                 | |       | | |   366 state events
|                 | |       | | |   232 time events
|                 | |       | | solver: gbode
|                 | |       | | |  7453 steps taken
|                 | |       | | | 67872 calls of functionODE
|                 | |       | | |  4934 evaluations of jacobian
|                 | |       | | |     4 error test failures
|                 | |       | | |  2264 convergence test failures
|                 | |       | | | 0s time of jacobian evaluation