Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.3-maint.9.1.x/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo", uses=false)
Using package TransiEnt with version 2.0.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo)
Using package DataFiles with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo)
Using package Design with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Using package Modelica_StateGraph2 with version 2.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo)
Using package Modelica_LinearSystems2 with version 2.4.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo)
Using package ModelicaReference with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo)
Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Using package Buildings with version 9.1.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.3-maint.9.1.x/package.mo)
Running command: translateModel(TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2880,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction")
translateModel(TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2880,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.3-maint.9.1.x/package.mo): time 2.143/2.143, allocations: 390.3 MB / 410 MB, free: 12.62 MB / 318.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.000603/0.000603, allocations: 37.94 kB / 0.4899 GB, free: 4.641 MB / 398.1 MB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo): time 0.7066/0.7066, allocations: 127.2 MB / 0.7036 GB, free: 5.465 MB / 0.4981 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo): time 0.0889/0.0889, allocations: 22.37 MB / 0.8404 GB, free: 16.43 MB / 0.5294 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo): time 0.01264/0.01264, allocations: 0.8826 MB / 0.9623 GB, free: 3.383 MB / 0.6388 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo): time 0.2493/0.2493, allocations: 45.02 MB / 1.128 GB, free: 97.71 MB / 0.6544 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo): time 0.07683/0.07683, allocations: 13.56 MB / 1.271 GB, free: 93.61 MB / 0.6544 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001188/0.001188, allocations: 104.1 kB / 1.404 GB, free: 7.074 MB / 0.7013 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001336/0.001336, allocations: 190.8 kB / 1.537 GB, free: 222.9 MB / 0.8263 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.531/1.531, allocations: 222.9 MB / 1.887 GB, free: 91.61 MB / 0.8888 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo): time 0.0005806/0.0005809, allocations: 35.94 kB / 2.069 GB, free: 15.02 MB / 0.92 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo): time 0.0005559/0.0005559, allocations: 31.94 kB / 2.25 GB, free: 5.227 MB / 1.092 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo): time 1.09/1.09, allocations: 220.7 MB / 2.647 GB, free: 132.1 MB / 1.123 GB
Warning: Requested package TILMedia of version 1.8.0 ClaRa, but this package was already loaded with version 1.8.1 ClaRa. OpenModelica cannot reason about compatibility between the two packages since they are not semantic versions.
Warning: TransiEnt requested package ClaRa of version 1.8.0. ClaRa 1.8.1 is used instead which states that it is only compatible with a conversion script. Use convertPackageToLibrary(TransiEnt, ClaRa, "1.8.1") to run the conversion script or proceed with potential issues as a result.
Notification: TransiEnt requested package Buildings of version 9.0.0. Buildings 9.1.3 is used instead which states that it is fully compatible without conversion script needed.
Notification: Performance of FrontEnd - loaded program: time 0.005048/0.005048, allocations: 311.9 kB / 3.12 GB, free: 9.691 MB / 1.233 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 2.138/2.144, allocations: 229.5 MB / 3.344 GB, free: 5.984 MB / 1.405 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction): time 0.01446/2.158, allocations: 11.07 MB / 3.355 GB, free: 14.07 MB / 1.42 GB
Notification: Performance of NFInst.instExpressions: time 0.01269/2.171, allocations: 6.908 MB / 3.361 GB, free: 8.848 MB / 1.42 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.001486/2.172, allocations: 38.94 kB / 3.361 GB, free: 8.832 MB / 1.42 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/SimCenter.mo:69:5-70:35:writable] Warning: Connector cycleSumPort is not balanced: The number of potential variables (0) is not equal to the number of flow variables (4).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:85:3-85:105:writable] Warning: Connector powerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:86:3-86:112:writable] Warning: Connector primBalPowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:87:3-87:102:writable] Warning: Connector primBalPowerOfferCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:88:3-88:111:writable] Warning: Connector secBalPowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:89:3-89:101:writable] Warning: Connector secBalPowerOfferCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:90:3-90:92:writable] Warning: Connector surroundingGridLoad is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:92:3-92:126:writable] Warning: Connector tielinePowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:93:3-93:130:writable] Warning: Connector tielineSetPowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:95:3-95:95:writable] Warning: Connector kineticEnergyCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:98:3-98:99:writable] Warning: Connector gwpCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:100:3-100:107:writable] Warning: Connector gwpCollectorHeat is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:103:3-103:82:writable] Warning: Connector heatFlowCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:105:3-105:87:writable] Warning: Connector costsCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (6).
Notification: Performance of NFTyping.typeComponents: time 0.002738/2.175, allocations: 0.9915 MB / 3.362 GB, free: 8.207 MB / 1.42 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Basics/Functions/fullPathName.mo:2:1-78:17:writable] Warning: Pure function 'TransiEnt.Basics.Functions.fullPathName' contains a call to impure function 'Modelica.Utilities.Streams.print'.
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BrownCoal as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BrownCoal) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BlackCoal as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BlackCoal) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.NaturalGas as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.NaturalGas) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOnshore as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOnshore) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOffshore as Integer: 5. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOffshore) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Solar as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Solar) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Hydro as Integer: 7. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Hydro) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Nuclear as Integer: 8. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Nuclear) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Oil as Integer: 9. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Oil) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.NaturalGas as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.NaturalGas) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.DistrictHeating as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.DistrictHeating) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Oil as Integer: 5. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Oil) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Electricity as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Electricity) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Solar as Integer: 7. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Solar) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Biomass as Integer: 8. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Biomass) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Others as Integer: 10. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Others) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Generic as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Generic) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Storage as Integer: 5. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Storage) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Generic as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Generic) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Generic as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Generic) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Notification: Performance of NFTyping.typeBindings: time 0.002542/2.178, allocations: 1.23 MB / 3.363 GB, free: 7.297 MB / 1.42 GB
Notification: Performance of NFTyping.typeClassSections: time 0.001663/2.179, allocations: 0.6825 MB / 3.364 GB, free: 6.773 MB / 1.42 GB
Notification: Performance of NFFlatten.flatten: time 0.003581/2.183, allocations: 3.1 MB / 3.367 GB, free: 4.934 MB / 1.42 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.001112/2.184, allocations: 0.8784 MB / 3.368 GB, free: 4.488 MB / 1.42 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.002082/2.186, allocations: 1.638 MB / 3.37 GB, free: 3.656 MB / 1.42 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.001954/2.188, allocations: 1.633 MB / 3.371 GB, free: 2.648 MB / 1.42 GB
Notification: Performance of NFPackage.collectConstants: time 0.0005011/2.189, allocations: 280.6 kB / 3.372 GB, free: 2.648 MB / 1.42 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.001409/2.19, allocations: 0.625 MB / 3.372 GB, free: 2.449 MB / 1.42 GB
Notification: Performance of NFScalarize.scalarize: time 0.001135/2.191, allocations: 1.203 MB / 3.373 GB, free: 1.664 MB / 1.42 GB
Notification: Performance of NFVerifyModel.verify: time 0.001843/2.193, allocations: 1.807 MB / 3.375 GB, free: 336 kB / 1.42 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/GlobalCollectors/GwpEmissionsStatistics.mo:79:53-79:84:writable] Error: Variable simCenter.expertMode not found in scope GwpEmissionsStatistics.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/GlobalCollectors/GwpEmissionsStatistics.mo:83:53-83:84:writable] Error: Variable simCenter.expertMode not found in scope GwpEmissionsStatistics.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/GlobalCollectors/EconomicStatistics.mo:42:70-42:85:writable] Error: Variable True not found in scope EconomicStatistics.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:105:71-105:86:writable] Error: Variable True not found in scope ModelStatistics.
Notification: Performance of NFConvertDAE.convert: time 0.04392/2.237, allocations: 24.63 MB / 3.399 GB, free: 6.348 MB / 1.436 GB
Notification: Performance of FrontEnd - DAE generated: time 3.276e-06/2.237, allocations: 0 / 3.399 GB, free: 6.348 MB / 1.436 GB
Notification: Performance of FrontEnd: time 1.674e-06/2.237, allocations: 0 / 3.399 GB, free: 6.348 MB / 1.436 GB
Notification: Performance of Transformations before backend: time 0.0001232/2.237, allocations: 5.562 kB / 3.399 GB, free: 6.344 MB / 1.436 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 509
 * Number of variables: 509
Notification: Performance of Generate backend data structure: time 0.009633/2.247, allocations: 5.353 MB / 3.404 GB, free: 2.648 MB / 1.436 GB
Notification: Performance of prepare preOptimizeDAE: time 4.454e-05/2.247, allocations: 8.25 kB / 3.404 GB, free: 2.648 MB / 1.436 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.001161/2.248, allocations: 479.3 kB / 3.405 GB, free: 2.395 MB / 1.436 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.006373/2.254, allocations: 3.61 MB / 3.408 GB, free: 15.98 MB / 1.452 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0001876/2.254, allocations: 184.7 kB / 3.409 GB, free: 15.87 MB / 1.452 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.0002822/2.255, allocations: 186.1 kB / 3.409 GB, free: 15.82 MB / 1.452 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.005065/2.26, allocations: 3.278 MB / 3.412 GB, free: 13.83 MB / 1.452 GB
Notification: Performance of preOpt findStateOrder (simulation): time 4.11e-05/2.26, allocations: 10.22 kB / 3.412 GB, free: 13.82 MB / 1.452 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.0001865/2.26, allocations: 92.81 kB / 3.412 GB, free: 13.76 MB / 1.452 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 6.557e-05/2.26, allocations: 54.72 kB / 3.412 GB, free: 13.76 MB / 1.452 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.004449/2.265, allocations: 2.889 MB / 3.415 GB, free: 12.4 MB / 1.452 GB
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.01218/2.277, allocations: 9.756 MB / 3.424 GB, free: 4.453 MB / 1.452 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.004308/2.281, allocations: 4.506 MB / 3.429 GB, free: 1.117 MB / 1.452 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.003746/2.285, allocations: 4.199 MB / 3.433 GB, free: 13.97 MB / 1.467 GB
Notification: Performance of preOpt evalFunc (simulation): time 7.856e-05/2.285, allocations: 22.52 kB / 3.433 GB, free: 13.96 MB / 1.467 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.001979/2.287, allocations: 1.522 MB / 3.434 GB, free: 12.63 MB / 1.467 GB
Notification: Performance of pre-optimization done (n=110): time 3.246e-06/2.287, allocations: 0 / 3.434 GB, free: 12.63 MB / 1.467 GB
Notification: Performance of matching and sorting (n=110): time 0.008546/2.296, allocations: 6.943 MB / 3.441 GB, free: 5.648 MB / 1.467 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.000356/2.296, allocations: 0.567 MB / 3.442 GB, free: 4.996 MB / 1.467 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.005785/2.302, allocations: 3.79 MB / 3.445 GB, free: 1.188 MB / 1.467 GB
Notification: Performance of collectPreVariables (initialization): time 0.000123/2.302, allocations: 77.67 kB / 3.446 GB, free: 1.105 MB / 1.467 GB
Notification: Performance of collectInitialEqns (initialization): time 0.001581/2.303, allocations: 1.89 MB / 3.447 GB, free: 15.2 MB / 1.483 GB
Notification: Performance of collectInitialBindings (initialization): time 0.0003389/2.304, allocations: 353.5 kB / 3.448 GB, free: 14.85 MB / 1.483 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.000779/2.305, allocations: 0.6661 MB / 3.448 GB, free: 14.17 MB / 1.483 GB
Notification: Performance of setup shared object (initialization): time 0.0001032/2.305, allocations: 301.1 kB / 3.449 GB, free: 13.88 MB / 1.483 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.001337/2.306, allocations: 0.8607 MB / 3.449 GB, free: 13.01 MB / 1.483 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.002403/2.308, allocations: 2.529 MB / 3.452 GB, free: 9.656 MB / 1.483 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[6] = $START.modelStatistics.heatingPower.E[6] (0.0 = $START.modelStatistics.heatingPower.E[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[4] = $START.modelStatistics.heatingPower.E[4] (0.0 = $START.modelStatistics.heatingPower.E[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[3] = $START.modelStatistics.heatingPower.E[3] (0.0 = $START.modelStatistics.heatingPower.E[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[2] = $START.modelStatistics.heatingPower.E[2] (0.0 = $START.modelStatistics.heatingPower.E[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[1] = $START.modelStatistics.heatingPower.E[1] (0.0 = $START.modelStatistics.heatingPower.E[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[5] = $START.modelStatistics.heatingPower.E[5] (0.0 = $START.modelStatistics.heatingPower.E[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[6] = $START.modelStatistics.electricPower.negPBE[6] (0.0 = $START.modelStatistics.electricPower.negPBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[5] = $START.modelStatistics.electricPower.negPBE[5] (0.0 = $START.modelStatistics.electricPower.negPBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[4] = $START.modelStatistics.electricPower.negPBE[4] (0.0 = $START.modelStatistics.electricPower.negPBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[3] = $START.modelStatistics.electricPower.negPBE[3] (0.0 = $START.modelStatistics.electricPower.negPBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[2] = $START.modelStatistics.electricPower.negPBE[2] (0.0 = $START.modelStatistics.electricPower.negPBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[1] = $START.modelStatistics.electricPower.negPBE[1] (0.0 = $START.modelStatistics.electricPower.negPBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[6] = $START.modelStatistics.electricPower.posPBE[6] (0.0 = $START.modelStatistics.electricPower.posPBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[5] = $START.modelStatistics.electricPower.posPBE[5] (0.0 = $START.modelStatistics.electricPower.posPBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[4] = $START.modelStatistics.electricPower.posPBE[4] (0.0 = $START.modelStatistics.electricPower.posPBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[3] = $START.modelStatistics.electricPower.posPBE[3] (0.0 = $START.modelStatistics.electricPower.posPBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[2] = $START.modelStatistics.electricPower.posPBE[2] (0.0 = $START.modelStatistics.electricPower.posPBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[1] = $START.modelStatistics.electricPower.posPBE[1] (0.0 = $START.modelStatistics.electricPower.posPBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[4] = $START.modelStatistics.electricPower.E[4] (0.0 = $START.modelStatistics.electricPower.E[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[3] = $START.modelStatistics.electricPower.E[3] (0.0 = $START.modelStatistics.electricPower.E[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[2] = $START.modelStatistics.electricPower.E[2] (0.0 = $START.modelStatistics.electricPower.E[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[1] = $START.modelStatistics.electricPower.E[1] (0.0 = $START.modelStatistics.electricPower.E[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[6] = $START.modelStatistics.electricPower.E[6] (0.0 = $START.modelStatistics.electricPower.E[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[5] = $START.modelStatistics.electricPower.E[5] (0.0 = $START.modelStatistics.electricPower.E[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[10] = $START.modelStatistics.gwpEmissions.m_CDE_heat[10] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[10])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[8] = $START.modelStatistics.gwpEmissions.m_CDE_heat[8] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[8])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[7] = $START.modelStatistics.gwpEmissions.m_CDE_heat[7] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[7])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[6] = $START.modelStatistics.gwpEmissions.m_CDE_heat[6] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[5] = $START.modelStatistics.gwpEmissions.m_CDE_heat[5] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[4] = $START.modelStatistics.gwpEmissions.m_CDE_heat[4] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[3] = $START.modelStatistics.gwpEmissions.m_CDE_heat[3] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[9] = $START.modelStatistics.gwpEmissions.m_CDE[9] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[9])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[8] = $START.modelStatistics.gwpEmissions.m_CDE[8] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[8])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[7] = $START.modelStatistics.gwpEmissions.m_CDE[7] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[7])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[6] = $START.modelStatistics.gwpEmissions.m_CDE[6] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[5] = $START.modelStatistics.gwpEmissions.m_CDE[5] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[4] = $START.modelStatistics.gwpEmissions.m_CDE[4] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[3] = $START.modelStatistics.gwpEmissions.m_CDE[3] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[2] = $START.modelStatistics.gwpEmissions.m_CDE[2] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[1] = $START.modelStatistics.gwpEmissions.m_CDE[1] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[9] = $START.modelStatistics.gwpEmissions.m_CDE_heat[9] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[9])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[2] = $START.modelStatistics.gwpEmissions.m_CDE_heat[2] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[1] = $START.modelStatistics.gwpEmissions.m_CDE_heat[1] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[14] = $START.modelStatistics.gwpEmissions.m_CDE[14] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[14])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[13] = $START.modelStatistics.gwpEmissions.m_CDE[13] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[13])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[12] = $START.modelStatistics.gwpEmissions.m_CDE[12] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[12])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[11] = $START.modelStatistics.gwpEmissions.m_CDE[11] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[11])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[10] = $START.modelStatistics.gwpEmissions.m_CDE[10] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[10])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[6] = $START.modelStatistics.electricPower.negSBE[6] (0.0 = $START.modelStatistics.electricPower.negSBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[5] = $START.modelStatistics.electricPower.negSBE[5] (0.0 = $START.modelStatistics.electricPower.negSBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[4] = $START.modelStatistics.electricPower.negSBE[4] (0.0 = $START.modelStatistics.electricPower.negSBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[3] = $START.modelStatistics.electricPower.negSBE[3] (0.0 = $START.modelStatistics.electricPower.negSBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[2] = $START.modelStatistics.electricPower.negSBE[2] (0.0 = $START.modelStatistics.electricPower.negSBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[1] = $START.modelStatistics.electricPower.negSBE[1] (0.0 = $START.modelStatistics.electricPower.negSBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[6] = $START.modelStatistics.electricPower.posSBE[6] (0.0 = $START.modelStatistics.electricPower.posSBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[5] = $START.modelStatistics.electricPower.posSBE[5] (0.0 = $START.modelStatistics.electricPower.posSBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[4] = $START.modelStatistics.electricPower.posSBE[4] (0.0 = $START.modelStatistics.electricPower.posSBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[3] = $START.modelStatistics.electricPower.posSBE[3] (0.0 = $START.modelStatistics.electricPower.posSBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[2] = $START.modelStatistics.electricPower.posSBE[2] (0.0 = $START.modelStatistics.electricPower.posSBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[1] = $START.modelStatistics.electricPower.posSBE[1] (0.0 = $START.modelStatistics.electricPower.posSBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E_residual_pos = $START.modelStatistics.electricPower.E_residual_pos (0.0 = $START.modelStatistics.electricPower.E_residual_pos)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E_residual_neg = $START.modelStatistics.electricPower.E_residual_neg (0.0 = $START.modelStatistics.electricPower.E_residual_neg)
Notification: Performance of analyzeInitialSystem (initialization): time 0.008639/2.317, allocations: 9.712 MB / 3.461 GB, free: 13.97 MB / 1.499 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 5.852e-05/2.317, allocations: 20 kB / 3.461 GB, free: 13.95 MB / 1.499 GB
Notification: Performance of matching and sorting (n=372) (initialization): time 0.005927/2.323, allocations: 3.334 MB / 3.465 GB, free: 10.61 MB / 1.499 GB
Notification: Performance of prepare postOptimizeDAE: time 8.569e-05/2.323, allocations: 61.88 kB / 3.465 GB, free: 10.54 MB / 1.499 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.441e-05/2.323, allocations: 64 kB / 3.465 GB, free: 10.48 MB / 1.499 GB
Notification: Performance of postOpt tearingSystem (initialization): time 8.9e-05/2.323, allocations: 80 kB / 3.465 GB, free: 10.4 MB / 1.499 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.001607/2.325, allocations: 0.577 MB / 3.465 GB, free: 9.824 MB / 1.499 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 8.432e-05/2.325, allocations: 119.5 kB / 3.466 GB, free: 9.707 MB / 1.499 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.002495/2.328, allocations: 369.4 kB / 3.466 GB, free: 9.344 MB / 1.499 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0001941/2.328, allocations: 172.4 kB / 3.466 GB, free: 9.176 MB / 1.499 GB
Warning: Assuming fixed start value for the following 35 variables:
         mod.P_rcbl_max_back_total:DISCRETE(unit = "W" fixed = true )  type: Real
         mod.P_rcbl_min_back_total:DISCRETE(unit = "W" fixed = true )  type: Real
         mod.P_mustrun_residual:DISCRETE(unit = "W" fixed = true )  "Mustrun power of plants that are more expensive than me" type: Real
         mod.is_commitment_mode:DISCRETE(fixed = true )  type: Boolean
         mod.P_rcbl_min_back[2]:DISCRETE(unit = "W" fixed = true )  "Min operating point to reach next timestep operating point" type: Real [2]
         mod.P_rcbl_min_back[1]:DISCRETE(unit = "W" fixed = true )  "Min operating point to reach next timestep operating point" type: Real [2]
         mod.P_rcbl_max_back[2]:DISCRETE(unit = "W" fixed = true )  "Max operating point to reach next timestep operating point" type: Real [2]
         mod.P_rcbl_max_back[1]:DISCRETE(unit = "W" fixed = true )  "Max operating point to reach next timestep operating point" type: Real [2]
         mod.P_rcbl_min[2,5]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[2,4]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[2,3]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[2,2]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[1,5]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[1,4]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[1,3]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[1,2]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[2,5]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[2,4]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[2,3]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[2,2]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[1,5]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[1,4]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[1,3]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[1,2]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_load[5]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
         mod.P_load[4]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
         mod.P_load[3]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
         mod.P_load[2]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
         mod.P_load[1]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
         mod.P_0[2]:DISCRETE(unit = "W" fixed = true )  "Current operating point" type: Real [2]
         mod.P_0[1]:DISCRETE(unit = "W" fixed = true )  "Current operating point" type: Real [2]
         mod.P_rcbl_min[2,1]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_min[1,1]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[2,1]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
         mod.P_rcbl_max[1,1]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
Warning: The initial conditions are over specified. The following 62 initial equations are redundant, so they are removed from the initialization system:
         modelStatistics.heatingPower.E[6] = $START.modelStatistics.heatingPower.E[6]
         modelStatistics.heatingPower.E[4] = $START.modelStatistics.heatingPower.E[4]
         modelStatistics.heatingPower.E[3] = $START.modelStatistics.heatingPower.E[3]
         modelStatistics.heatingPower.E[2] = $START.modelStatistics.heatingPower.E[2]
         modelStatistics.heatingPower.E[1] = $START.modelStatistics.heatingPower.E[1]
         modelStatistics.heatingPower.E[5] = $START.modelStatistics.heatingPower.E[5]
         modelStatistics.electricPower.negPBE[6] = $START.modelStatistics.electricPower.negPBE[6]
         modelStatistics.electricPower.negPBE[5] = $START.modelStatistics.electricPower.negPBE[5]
         modelStatistics.electricPower.negPBE[4] = $START.modelStatistics.electricPower.negPBE[4]
         modelStatistics.electricPower.negPBE[3] = $START.modelStatistics.electricPower.negPBE[3]
         modelStatistics.electricPower.negPBE[2] = $START.modelStatistics.electricPower.negPBE[2]
         modelStatistics.electricPower.negPBE[1] = $START.modelStatistics.electricPower.negPBE[1]
         modelStatistics.electricPower.posPBE[6] = $START.modelStatistics.electricPower.posPBE[6]
         modelStatistics.electricPower.posPBE[5] = $START.modelStatistics.electricPower.posPBE[5]
         modelStatistics.electricPower.posPBE[4] = $START.modelStatistics.electricPower.posPBE[4]
         modelStatistics.electricPower.posPBE[3] = $START.modelStatistics.electricPower.posPBE[3]
         modelStatistics.electricPower.posPBE[2] = $START.modelStatistics.electricPower.posPBE[2]
         modelStatistics.electricPower.posPBE[1] = $START.modelStatistics.electricPower.posPBE[1]
         modelStatistics.electricPower.E[4] = $START.modelStatistics.electricPower.E[4]
         modelStatistics.electricPower.E[3] = $START.modelStatistics.electricPower.E[3]
         modelStatistics.electricPower.E[2] = $START.modelStatistics.electricPower.E[2]
         modelStatistics.electricPower.E[1] = $START.modelStatistics.electricPower.E[1]
         modelStatistics.electricPower.E[6] = $START.modelStatistics.electricPower.E[6]
         modelStatistics.electricPower.E[5] = $START.modelStatistics.electricPower.E[5]
         modelStatistics.gwpEmissions.m_CDE_heat[10] = $START.modelStatistics.gwpEmissions.m_CDE_heat[10]
         modelStatistics.gwpEmissions.m_CDE_heat[8] = $START.modelStatistics.gwpEmissions.m_CDE_heat[8]
         modelStatistics.gwpEmissions.m_CDE_heat[7] = $START.modelStatistics.gwpEmissions.m_CDE_heat[7]
         modelStatistics.gwpEmissions.m_CDE_heat[6] = $START.modelStatistics.gwpEmissions.m_CDE_heat[6]
         modelStatistics.gwpEmissions.m_CDE_heat[5] = $START.modelStatistics.gwpEmissions.m_CDE_heat[5]
         modelStatistics.gwpEmissions.m_CDE_heat[4] = $START.modelStatistics.gwpEmissions.m_CDE_heat[4]
         modelStatistics.gwpEmissions.m_CDE_heat[3] = $START.modelStatistics.gwpEmissions.m_CDE_heat[3]
         modelStatistics.gwpEmissions.m_CDE[9] = $START.modelStatistics.gwpEmissions.m_CDE[9]
         modelStatistics.gwpEmissions.m_CDE[8] = $START.modelStatistics.gwpEmissions.m_CDE[8]
         modelStatistics.gwpEmissions.m_CDE[7] = $START.modelStatistics.gwpEmissions.m_CDE[7]
         modelStatistics.gwpEmissions.m_CDE[6] = $START.modelStatistics.gwpEmissions.m_CDE[6]
         modelStatistics.gwpEmissions.m_CDE[5] = $START.modelStatistics.gwpEmissions.m_CDE[5]
         modelStatistics.gwpEmissions.m_CDE[4] = $START.modelStatistics.gwpEmissions.m_CDE[4]
         modelStatistics.gwpEmissions.m_CDE[3] = $START.modelStatistics.gwpEmissions.m_CDE[3]
         modelStatistics.gwpEmissions.m_CDE[2] = $START.modelStatistics.gwpEmissions.m_CDE[2]
         modelStatistics.gwpEmissions.m_CDE[1] = $START.modelStatistics.gwpEmissions.m_CDE[1]
         modelStatistics.gwpEmissions.m_CDE_heat[9] = $START.modelStatistics.gwpEmissions.m_CDE_heat[9]
         modelStatistics.gwpEmissions.m_CDE_heat[2] = $START.modelStatistics.gwpEmissions.m_CDE_heat[2]
         modelStatistics.gwpEmissions.m_CDE_heat[1] = $START.modelStatistics.gwpEmissions.m_CDE_heat[1]
         modelStatistics.gwpEmissions.m_CDE[14] = $START.modelStatistics.gwpEmissions.m_CDE[14]
         modelStatistics.gwpEmissions.m_CDE[13] = $START.modelStatistics.gwpEmissions.m_CDE[13]
         modelStatistics.gwpEmissions.m_CDE[12] = $START.modelStatistics.gwpEmissions.m_CDE[12]
         modelStatistics.gwpEmissions.m_CDE[11] = $START.modelStatistics.gwpEmissions.m_CDE[11]
         modelStatistics.gwpEmissions.m_CDE[10] = $START.modelStatistics.gwpEmissions.m_CDE[10]
         modelStatistics.electricPower.negSBE[6] = $START.modelStatistics.electricPower.negSBE[6]
         modelStatistics.electricPower.negSBE[5] = $START.modelStatistics.electricPower.negSBE[5]
         modelStatistics.electricPower.negSBE[4] = $START.modelStatistics.electricPower.negSBE[4]
         modelStatistics.electricPower.negSBE[3] = $START.modelStatistics.electricPower.negSBE[3]
         modelStatistics.electricPower.negSBE[2] = $START.modelStatistics.electricPower.negSBE[2]
         modelStatistics.electricPower.negSBE[1] = $START.modelStatistics.electricPower.negSBE[1]
         modelStatistics.electricPower.posSBE[6] = $START.modelStatistics.electricPower.posSBE[6]
         modelStatistics.electricPower.posSBE[5] = $START.modelStatistics.electricPower.posSBE[5]
         modelStatistics.electricPower.posSBE[4] = $START.modelStatistics.electricPower.posSBE[4]
         modelStatistics.electricPower.posSBE[3] = $START.modelStatistics.electricPower.posSBE[3]
         modelStatistics.electricPower.posSBE[2] = $START.modelStatistics.electricPower.posSBE[2]
         modelStatistics.electricPower.posSBE[1] = $START.modelStatistics.electricPower.posSBE[1]
         modelStatistics.electricPower.E_residual_pos = $START.modelStatistics.electricPower.E_residual_pos
         modelStatistics.electricPower.E_residual_neg = $START.modelStatistics.electricPower.E_residual_neg.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 266
 * Number of states: 0 ()
 * Number of discrete variables: 116 (mod.firstTrigger,$PRE.mod.firstTrigger,$PRE.mod.P_rcbl_max_back_total,mod.P_rcbl_max_back_total,$PRE.mod.P_rcbl_min_back_total,mod.P_rcbl_min_back_total,$PRE.mod.P_mustrun_residual,mod.P_mustrun_residual,$PRE.mod.is_commitment_mode,mod.is_commitment_mode,$PRE.mod.P_rcbl_min_back[2],mod.P_rcbl_min_back[2],$PRE.mod.P_rcbl_min_back[1],mod.P_rcbl_min_back[1],$PRE.mod.P_rcbl_max_back[2],mod.P_rcbl_max_back[2],$PRE.mod.P_rcbl_max_back[1],mod.P_rcbl_max_back[1],$PRE.mod.P_rcbl_min[2,5],mod.P_rcbl_min[2,5],$PRE.mod.P_rcbl_min[2,4],mod.P_rcbl_min[2,4],$PRE.mod.P_rcbl_min[2,3],mod.P_rcbl_min[2,3],$PRE.mod.P_rcbl_min[2,2],mod.P_rcbl_min[2,2],$PRE.mod.P_rcbl_min[1,5],mod.P_rcbl_min[1,5],$PRE.mod.P_rcbl_min[1,4],mod.P_rcbl_min[1,4],$PRE.mod.P_rcbl_min[1,3],mod.P_rcbl_min[1,3],$PRE.mod.P_rcbl_min[1,2],mod.P_rcbl_min[1,2],$PRE.mod.P_rcbl_max[2,5],mod.P_rcbl_max[2,5],$PRE.mod.P_rcbl_max[2,4],mod.P_rcbl_max[2,4],$PRE.mod.P_rcbl_max[2,3],mod.P_rcbl_max[2,3],$PRE.mod.P_rcbl_max[2,2],mod.P_rcbl_max[2,2],$PRE.mod.P_rcbl_max[1,5],mod.P_rcbl_max[1,5],$PRE.mod.P_rcbl_max[1,4],mod.P_rcbl_max[1,4],$PRE.mod.P_rcbl_max[1,3],mod.P_rcbl_max[1,3],$PRE.mod.P_rcbl_max[1,2],mod.P_rcbl_max[1,2],$PRE.mod.P_load[5],mod.P_load[5],$PRE.mod.P_load[4],mod.P_load[4],$PRE.mod.P_load[3],mod.P_load[3],$PRE.mod.P_load[2],mod.P_load[2],$PRE.mod.P_load[1],mod.P_load[1],$PRE.mod.P_0[2],mod.P_0[2],$PRE.mod.P_0[1],mod.P_0[1],$PRE.mod.P_rcbl_min[2,1],$PRE.mod.P_rcbl_min[1,1],mod.P_rcbl_min[2,1],mod.P_rcbl_min[1,1],$PRE.mod.P_rcbl_max[2,1],$PRE.mod.P_rcbl_max[1,1],mod.P_rcbl_max[2,1],mod.P_rcbl_max[1,1],mod.P_min[2],$PRE.mod.P_min[2],mod.P_min[1],$PRE.mod.P_min[1],mod.P_max[2],$PRE.mod.P_max[2],mod.P_max[1],$PRE.mod.P_max[1],mod.z[2,4],mod.z[2,3],mod.z[2,2],mod.z[2,1],opstatus_1h_pred.y_set[1],mod.z[1,5],mod.z[1,4],mod.z[1,3],mod.z[1,2],mod.z[1,1],mod.y[2],$PRE.mod.y[2],mod.y[1],$PRE.mod.y[1],mod.commitment_order[2],mod.commitment_order[1],mod.merit_order[2],mod.merit_order[1],mod.sampleTrigger,$whenCondition4,$whenCondition3,$whenCondition5,$PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$whenCondition2,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,$whenCondition1,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,opstatus_now.y_set[1],opstatus_1h_pred.y_set[2],mod.z[2,5],opstatus_now.y_set[2])
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (365):
 * Single equations (assignments): 364
 * Array equations: 0
 * Algorithm blocks: 1
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 0.003128/2.331, allocations: 2.062 MB / 3.468 GB, free: 7.02 MB / 1.499 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.0007042/2.332, allocations: 409.3 kB / 3.468 GB, free: 6.617 MB / 1.499 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.000663/2.332, allocations: 383.3 kB / 3.469 GB, free: 6.238 MB / 1.499 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 1.195e-05/2.332, allocations: 7.984 kB / 3.469 GB, free: 6.23 MB / 1.499 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 3.537e-06/2.332, allocations: 0 / 3.469 GB, free: 6.23 MB / 1.499 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.001306/2.334, allocations: 0.7557 MB / 3.47 GB, free: 5.453 MB / 1.499 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.0004591/2.334, allocations: 95.89 kB / 3.47 GB, free: 5.359 MB / 1.499 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.0007631/2.335, allocations: 63.94 kB / 3.47 GB, free: 5.297 MB / 1.499 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.0002939/2.335, allocations: 147.7 kB / 3.47 GB, free: 5.152 MB / 1.499 GB
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/BackEnd/DAEMode.mo:528:7-530:90:writable] Error: Internal error DAEMode.traverserStrongComponents failed on equation:
1/1 (1): mod.P_max[1] = mod.P_max_var[1]
2/2 (1): mod.P_min[1] = mod.P_min_var[1]
3/3 (49): algorithm
  mod.P_rcbl_max_back_total := pre(mod.P_rcbl_max_back_total);
  mod.P_rcbl_min_back_total := pre(mod.P_rcbl_min_back_total);
  mod.P_mustrun_residual := pre(mod.P_mustrun_residual);
  mod.y[2] := pre(mod.y[2]);
  mod.y[1] := pre(mod.y[1]);
  mod.P_min[2] := pre(mod.P_min[2]);
  mod.P_min[1] := pre(mod.P_min[1]);
  mod.P_max[2] := pre(mod.P_max[2]);
  mod.P_max[1] := pre(mod.P_max[1]);
  mod.is_commitment_mode := pre(mod.is_commitment_mode);
  $whenCondition4 := pre($whenCondition4);
  mod.P_rcbl_min_back[2] := pre(mod.P_rcbl_min_back[2]);
  mod.P_rcbl_min_back[1] := pre(mod.P_rcbl_min_back[1]);
  mod.P_rcbl_max_back[2] := pre(mod.P_rcbl_max_back[2]);
  mod.P_rcbl_max_back[1] := pre(mod.P_rcbl_max_back[1]);
  mod.P_rcbl_min[2,5] := pre(mod.P_rcbl_min[2,5]);
  mod.P_rcbl_min[2,4] := pre(mod.P_rcbl_min[2,4]);
  mod.P_rcbl_min[2,3] := pre(mod.P_rcbl_min[2,3]);
  mod.P_rcbl_min[2,2] := pre(mod.P_rcbl_min[2,2]);
  mod.P_rcbl_min[2,1] := pre(mod.P_rcbl_min[2,1]);
  mod.P_rcbl_min[1,5] := pre(mod.P_rcbl_min[1,5]);
  mod.P_rcbl_min[1,4] := pre(mod.P_rcbl_min[1,4]);
  mod.P_rcbl_min[1,3] := pre(mod.P_rcbl_min[1,3]);
  mod.P_rcbl_min[1,2] := pre(mod.P_rcbl_min[1,2]);
  mod.P_rcbl_min[1,1] := pre(mod.P_rcbl_min[1,1]);
  mod.P_rcbl_max[2,5] := pre(mod.P_rcbl_max[2,5]);
  mod.P_rcbl_max[2,4] := pre(mod.P_rcbl_max[2,4]);
  mod.P_rcbl_max[2,3] := pre(mod.P_rcbl_max[2,3]);
  mod.P_rcbl_max[2,2] := pre(mod.P_rcbl_max[2,2]);
  mod.P_rcbl_max[2,1] := pre(mod.P_rcbl_max[2,1]);
  mod.P_rcbl_max[1,5] := pre(mod.P_rcbl_max[1,5]);
  mod.P_rcbl_max[1,4] := pre(mod.P_rcbl_max[1,4]);
  mod.P_rcbl_max[1,3] := pre(mod.P_rcbl_max[1,3]);
  mod.P_rcbl_max[1,2] := pre(mod.P_rcbl_max[1,2]);
  mod.P_rcbl_max[1,1] := pre(mod.P_rcbl_max[1,1]);
  mod.P_load[5] := pre(mod.P_load[5]);
  mod.P_load[4] := pre(mod.P_load[4]);
  mod.P_load[3] := pre(mod.P_load[3]);
  mod.P_load[2] := pre(mod.P_load[2]);
  mod.P_load[1] := pre(mod.P_load[1]);
  mod.P_0[2] := pre(mod.P_0[2]);
  mod.P_0[1] := pre(mod.P_0[1]);
  $whenCondition3 := pre($whenCondition3);
  mod.commitment_order[2] := pre(mod.commitment_order[2]);
  mod.commitment_order[1] := pre(mod.commitment_order[1]);
  mod.merit_order[2] := pre(mod.merit_order[2]);
  mod.merit_order[1] := pre(mod.merit_order[1]);
  mod.C_varsorted[2] := $START.mod.C_varsorted[2];
  mod.C_varsorted[1] := $START.mod.C_varsorted[1];
  (mod.C_varsorted, mod.merit_order) := Modelica.Math.Vectors.sort(mod.C_var, true);
  (_, mod.commitment_order) := Modelica.Math.Vectors.sort(mod.P_grad_max_star, false);
  $whenCondition3 := false;
  when $whenCondition3 then
    mod.P_0 := mod.P_init;
    mod.P_load := {discretizePrediction.P_predictions[1], discretizePrediction.P_predictions[2], discretizePrediction.P_predictions[3], discretizePrediction.P_predictions[4], discretizePrediction.P_predictions[5]};
    for j in 1:5 loop
      for i in 1:2 loop
        if mod.z[i,j] then
          assert(mod.P_0[i] <= mod.P_max_const[i], "Error in MeritOrderDispatcher at init: Plant " + String(i, 0, true) + " has inital power above maximum power limit");
          assert(mod.P_0[i] >= mod.P_min_const[i], "Error in MeritOrderDispatcher at init: Plant " + String(i, 0, true) + " has inital power below minimum power limit");
          mod.P_rcbl_max[i,j] := mod.P_0[i];
          mod.P_rcbl_min[i,j] := mod.P_0[i];
          mod.P_rcbl_max_back[i] := mod.P_0[i];
          mod.P_rcbl_min_back[i] := mod.P_0[i];
        else
          mod.P_rcbl_max[i,j] := 0.0;
          mod.P_rcbl_min[i,j] := 0.0;
        end if;
      end for;
    end for;
  end when;
  $whenCondition4 := mod.sampleTrigger;
  when $whenCondition4 then
    mod.is_commitment_mode := false;
    for i in 1:2 loop
      mod.P_max[i] := mod.P_max_const[i] - abs(mod.P_R_pos[i]);
      mod.P_min[i] := mod.P_min_const[i] + abs(mod.P_R_neg[i]);
    end for;
    for i in 1:1 loop
      mod.P_max[1] := mod.P_max_var[i] - abs(mod.P_R_pos[i]);
      mod.P_min[1] := mod.P_min_var[i] + abs(mod.P_R_neg[i]);
    end for;
    for i in 1:2 loop
      if mod.z[i,1] then
        mod.y[i] := mod.P_min[i];
      else
        mod.y[i] := 0.0;
        mod.P_min[i] := 0.0;
      end if;
    end for;
    mod.P_0 := pre(mod.y);
    mod.P_load := {discretizePrediction.P_predictions[1], discretizePrediction.P_predictions[2], discretizePrediction.P_predictions[3], discretizePrediction.P_predictions[4], discretizePrediction.P_predictions[5]};
    for j in 1:5 loop
      for i in 1:2 loop
        if mod.z[i,j] then
          mod.P_rcbl_max[i,j] := min(mod.P_max[i], mod.P_0[i] + mod.P_grad_max_star[i] * mod.P_n[i] * 900.0 * /*Real*/(j));
          mod.P_rcbl_min[i,j] := max(mod.P_min[i], mod.P_0[i] - mod.P_grad_max_star[i] * mod.P_n[i] * 900.0 * /*Real*/(j));
        else
          mod.P_rcbl_max[i,j] := 0.0;
          mod.P_rcbl_min[i,j] := 0.0;
        end if;
      end for;
    end for;
    for i in 1:2 loop
      mod.P_mustrun_residual := 0.0;
      if mod.P_load[5] >= 0.0 and mod.z[mod.merit_order[i],5] then
        for k in i + 1:2 loop
          if mod.z[mod.merit_order[k],5] then
            mod.P_mustrun_residual := mod.P_mustrun_residual + mod.P_rcbl_min[mod.merit_order[k],5];
          end if;
        end for;
        mod.y[mod.merit_order[i]] := max(min(mod.P_rcbl_max[mod.merit_order[i],5], mod.P_load[5] - mod.P_mustrun_residual), mod.P_rcbl_min[mod.merit_order[i],5]);
        mod.P_load[5] := mod.P_load[5] - mod.y[mod.merit_order[i]];
      end if;
    end for;
    for j in 1:4 loop
      for i in 1:2 loop
        mod.P_rcbl_max_back[i] := min(mod.P_max[i], mod.y[i] + mod.P_grad_max_star[i] * mod.P_n[i] * 900.0);
        mod.P_rcbl_min_back[i] := max(mod.P_min[i], mod.y[i] - mod.P_grad_max_star[i] * mod.P_n[i] * 900.0);
      end for;
      for i in 1:2 loop
        if mod.z[i,5 - j] then
          mod.y[i] := mod.P_min[i];
        else
          mod.y[i] := 0.0;
        end if;
      end for;
      for i in 1:2 loop
        mod.P_mustrun_residual := 0.0;
        if mod.P_load[5 - j] >= 0.0 and mod.z[mod.merit_order[i],5 - j] then
          for k in i + 1:2 loop
            if mod.z[mod.merit_order[k],5 - j] then
              mod.P_mustrun_residual := mod.P_mustrun_residual + max(mod.P_rcbl_min[mod.merit_order[k],5 - j], mod.P_rcbl_min_back[k]);
            end if;
          end for;
          mod.y[mod.merit_order[i]] := max({min({mod.P_rcbl_max[mod.merit_order[i],5 - j], mod.P_rcbl_max_back[mod.merit_order[i]], mod.P_load[5 - j] - mod.P_mustrun_residual}), mod.P_rcbl_min_back[mod.merit_order[i]], mod.P_rcbl_min[mod.merit_order[i],5 - j]});
          mod.P_load[5 - j] := mod.P_load[5 - j] - mod.y[mod.merit_order[i]];
        end if;
      end for;
    end for;
    mod.P_rcbl_min_back_total := mod.P_rcbl_min_back[1] + mod.P_rcbl_min_back[2];
    mod.P_rcbl_max_back_total := mod.P_rcbl_max_back[1] + mod.P_rcbl_max_back[2];
    if mod.P_load[1] > 0.0 then
      for i in 1:2 loop
        if mod.P_load[1] > 0.0 and not mod.z[mod.commitment_order[i],1] then
          mod.is_commitment_mode := true;
          mod.y[mod.commitment_order[i]] := max(min(mod.P_max_const[mod.commitment_order[i]], mod.P_load[1]), mod.P_min_const[mod.commitment_order[i]]);
          mod.P_load[1] := mod.P_load[1] - mod.y[mod.commitment_order[i]];
        end if;
      end for;
    end if;
  end when;


Variables:
1: mod.P_rcbl_min[1,1]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
2: mod.P_load[2]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
3: mod.P_rcbl_min_back[2]:DISCRETE(unit = "W" fixed = true )  "Min operating point to reach next timestep operating point" type: Real [2]
4: mod.merit_order[1]:DISCRETE()  type: Integer [2]
5: mod.P_rcbl_max[2,1]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
6: mod.P_rcbl_min[2,4]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
7: mod.P_min[2]:DISCRETE(start = mod.P_min_const[2] unit = "W" fixed = true )  type: Real [2]
8: mod.P_0[2]:DISCRETE(unit = "W" fixed = true )  "Current operating point" type: Real [2]
9: mod.P_rcbl_min_back_total:DISCRETE(unit = "W" fixed = true )  type: Real
10: mod.y[1]:DISCRETE(flow=false start = mod.P_init[1] fixed = true )  type: Real [2]
11: mod.P_rcbl_max[2,5]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
12: mod.P_rcbl_min[2,1]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
13: mod.P_rcbl_min[1,3]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
14: mod.commitment_order[1]:DISCRETE()  "Order in which additional units are commited, if load can not be matched otherwise" type: Integer [2]
15: mod.P_load[4]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
16: mod.P_min[1]:DISCRETE(start = mod.P_min_const[1] unit = "W" fixed = true )  type: Real [2]
17: mod.P_min_var[1]:VARIABLE(unit = "W" )  type: Real [1]
18: mod.P_rcbl_max_back[2]:DISCRETE(unit = "W" fixed = true )  "Max operating point to reach next timestep operating point" type: Real [2]
19: mod.P_rcbl_max[2,3]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
20: mod.C_varsorted[1]:VARIABLE()  type: Real [2]
21: mod.P_mustrun_residual:DISCRETE(unit = "W" fixed = true )  "Mustrun power of plants that are more expensive than me" type: Real
22: mod.P_rcbl_max[1,3]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
23: mod.P_rcbl_max[1,5]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
24: mod.P_rcbl_min[2,5]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
25: mod.P_rcbl_max[1,2]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
26: mod.P_rcbl_max_back_total:DISCRETE(unit = "W" fixed = true )  type: Real
27: mod.P_0[1]:DISCRETE(unit = "W" fixed = true )  "Current operating point" type: Real [2]
28: mod.P_rcbl_max_back[1]:DISCRETE(unit = "W" fixed = true )  "Max operating point to reach next timestep operating point" type: Real [2]
29: mod.is_commitment_mode:DISCRETE(fixed = true )  type: Boolean
30: mod.P_rcbl_min[1,5]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
31: mod.merit_order[2]:DISCRETE()  type: Integer [2]
32: mod.P_rcbl_min[2,2]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
33: mod.P_load[1]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
34: mod.P_rcbl_max[2,2]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
35: mod.P_max[2]:DISCRETE(start = mod.P_max_const[2] unit = "W" fixed = true )  type: Real [2]
36: mod.P_rcbl_max[1,4]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
37: mod.y[2]:DISCRETE(flow=false start = mod.P_init[2] fixed = true )  type: Real [2]
38: $whenCondition4:DISCRETE(fixed = true protected = true )  "{mod.sampleTrigger}" type: Boolean unreplaceable
39: mod.P_rcbl_max[2,4]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
40: mod.P_rcbl_min[1,2]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
41: mod.P_rcbl_min[2,3]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
42: $whenCondition3:DISCRETE(fixed = true protected = true )  "{initial()}" type: Boolean unreplaceable
43: mod.P_load[5]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
44: mod.C_varsorted[2]:VARIABLE()  type: Real [2]
45: mod.P_rcbl_max[1,1]:DISCRETE(unit = "W" fixed = true )  "Max reachable operating point" type: Real [2,5]
46: mod.commitment_order[2]:DISCRETE()  "Order in which additional units are commited, if load can not be matched otherwise" type: Integer [2]
47: mod.P_max_var[1]:VARIABLE(unit = "W" )  type: Real [1]
48: mod.P_max[1]:DISCRETE(start = mod.P_max_const[1] unit = "W" fixed = true )  type: Real [2]
49: mod.P_load[3]:DISCRETE(unit = "W" fixed = true )  type: Real [5]
50: mod.P_rcbl_min_back[1]:DISCRETE(unit = "W" fixed = true )  "Min operating point to reach next timestep operating point" type: Real [2]
51: mod.P_rcbl_min[1,4]:DISCRETE(unit = "W" fixed = true )  "Min reachable operating point" type: Real [2,5]
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/BackEnd/BackendDAEUtil.mo:9805:5-9806:77:writable] Error: Internal error BackendDAEUtil.traverseEqSystemStrongComponents failed with function:
omc_DAEMode_traverserStrongComponents
Notification: Performance of <failed> postOpt createDAEmodeBDAE (simulation): time 0.003348/2.339, allocations: 3.091 MB / 3.473 GB, free: 1.832 MB / 1.499 GB
Error: post-optimization module createDAEmodeBDAE (simulation) failed.
Error: Internal error SimCode DAEmode: The model TransiEnt.Grid.Electrical.EconomicDispatch.Check.TestMeritOrderDispatcherStatePrediction could not be translated