Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr Buildings_10_Buildings.Templates.Components.Validation.Coils.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/package.mo", uses=false)
Using package Buildings with version 10.1.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: translateModel(Buildings.Templates.Components.Validation.Coils,tolerance=1e-06,outputFormat="mat",numberOfIntervals=5000,variableFilter="time|coiCoo.bus.y|coiCoo.bus.y_actual|coiCoo.hex.m1_flow|coiCoo.hex.m2_flow|coiCoo.hex.m1_flow_nominal|coiCoo.hex.m2_flow_nominal|coiCoo.hex.Q2_flow|coiCoo.Q_flow_nominal|coiHea.bus.y|coiHea.bus.y_actual|coiHea.hex.m1_flow|coiHea.hex.m2_flow|coiHea.hex.m1_flow_nominal|coiHea.hex.m2_flow_nominal|coiHea.hex.Q2_flow|coiHea.Q_flow_nominal|coiEle.bus.y|coiEle.hex.m_flow|coiEle.hex.m_flow_nominal|coiEle.hex.Q_flow|coiEle.Q_flow_nominal|coiEva.bus.y|coiEva.hex.m_flow|coiEva.hex.m_flow_nominal|coiEva.hex.QSen_flow|coiEva.hex.QLat_flow|coiEva.Q_flow_nominal|coiMul.bus.y|coiMul.hex.m_flow|coiMul.hex.m_flow_nominal|coiMul.hex.QSen_flow|coiMul.hex.QLat_flow|coiMul.Q_flow_nominal|non.m_flow|non.m_flow_nominal",fileNamePrefix="Buildings_10_Buildings.Templates.Components.Validation.Coils")
translateModel(Buildings.Templates.Components.Validation.Coils,tolerance=1e-06,outputFormat="mat",numberOfIntervals=5000,variableFilter="time|coiCoo.bus.y|coiCoo.bus.y_actual|coiCoo.hex.m1_flow|coiCoo.hex.m2_flow|coiCoo.hex.m1_flow_nominal|coiCoo.hex.m2_flow_nominal|coiCoo.hex.Q2_flow|coiCoo.Q_flow_nominal|coiHea.bus.y|coiHea.bus.y_actual|coiHea.hex.m1_flow|coiHea.hex.m2_flow|coiHea.hex.m1_flow_nominal|coiHea.hex.m2_flow_nominal|coiHea.hex.Q2_flow|coiHea.Q_flow_nominal|coiEle.bus.y|coiEle.hex.m_flow|coiEle.hex.m_flow_nominal|coiEle.hex.Q_flow|coiEle.Q_flow_nominal|coiEva.bus.y|coiEva.hex.m_flow|coiEva.hex.m_flow_nominal|coiEva.hex.QSen_flow|coiEva.hex.QLat_flow|coiEva.Q_flow_nominal|coiMul.bus.y|coiMul.hex.m_flow|coiMul.hex.m_flow_nominal|coiMul.hex.QSen_flow|coiMul.hex.QLat_flow|coiMul.Q_flow_nominal|non.m_flow|non.m_flow_nominal",fileNamePrefix="Buildings_10_Buildings.Templates.Components.Validation.Coils")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001172/0.001172, allocations: 104.7 kB / 16.41 MB, free: 6.512 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001137/0.001137, allocations: 187 kB / 17.34 MB, free: 5.742 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.38/1.38, allocations: 222.9 MB / 241 MB, free: 15.15 MB / 206.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/package.mo): time 2.466/2.466, allocations: 437 MB / 0.7112 GB, free: 4.383 MB / 0.5762 GB
Notification: Performance of FrontEnd - loaded program: time 0.001548/0.001549, allocations: 63.91 kB / 1.019 GB, free: 9.402 MB / 0.795 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 1.228/1.229, allocations: 151.6 MB / 1.167 GB, free: 4.012 MB / 0.8887 GB
Notification: Performance of NFInst.instantiate(Buildings.Templates.Components.Validation.Coils): time 1.682/2.912, allocations: 0.5869 GB / 1.754 GB, free: 59.79 MB / 1.279 GB
Notification: Performance of NFInst.instExpressions: time 0.1304/3.042, allocations: 89.59 MB / 1.842 GB, free: 15.45 MB / 1.295 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.02498/3.067, allocations: 342.1 kB / 1.842 GB, free: 15.11 MB / 1.295 GB
Notification: Performance of NFTyping.typeComponents: time 0.02063/3.088, allocations: 5.55 MB / 1.847 GB, free: 9.531 MB / 1.295 GB
Notification: Performance of NFTyping.typeBindings: time 0.0527/3.141, allocations: 13.38 MB / 1.861 GB, free: 12.1 MB / 1.311 GB
Notification: Performance of NFTyping.typeClassSections: time 0.03447/3.175, allocations: 10.27 MB / 1.871 GB, free: 1.871 MB / 1.311 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiHea.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter coiEle.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then coiEle.dat.Q_flow_nominal / 4186.0 / 10.0 else if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -coiEle.dat.Q_flow_nominal / 4186.0 / 5.0 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter coiEle.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 5000.0 else if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 3e4 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter coiEle.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEle.dat.typVal == Buildings.Templates.Components.Types.Valve.None then 0.0 else coiEle.dat.dpWat_nominal / 2.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter coiEle.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 50.0 + 273.15 else if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 7.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter coiEle.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEle.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 30.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiEle.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:20:3-31:79:writable] Warning: Parameter coiEva.dat.mAir_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorMultiStage or coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorVariableSpeed then coiEva.dat.datCoi.sta[coiEva.dat.datCoi.nSta].nomVal.m_flow_nominal else 1.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter coiEva.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then coiEva.dat.Q_flow_nominal / 4186.0 / 10.0 else if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -coiEva.dat.Q_flow_nominal / 4186.0 / 5.0 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter coiEva.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 5000.0 else if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 3e4 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter coiEva.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typVal == Buildings.Templates.Components.Types.Valve.None then 0.0 else coiEva.dat.dpWat_nominal / 2.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:69:3-80:79:writable] Warning: Parameter coiEva.dat.cap_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.None then 0.0 else if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorMultiStage or coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorVariableSpeed then coiEva.dat.datCoi.sta[coiEva.dat.datCoi.nSta].nomVal.Q_flow_nominal else if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -1e4 else 1e4) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter coiEva.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 50.0 + 273.15 else if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 7.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter coiEva.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiEva.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 30.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiEva.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:20:3-31:79:writable] Warning: Parameter coiMul.dat.mAir_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorMultiStage or coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorVariableSpeed then coiMul.dat.datCoi.sta[coiMul.dat.datCoi.nSta].nomVal.m_flow_nominal else 1.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter coiMul.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then coiMul.dat.Q_flow_nominal / 4186.0 / 10.0 else if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -coiMul.dat.Q_flow_nominal / 4186.0 / 5.0 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter coiMul.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 5000.0 else if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 3e4 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter coiMul.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typVal == Buildings.Templates.Components.Types.Valve.None then 0.0 else coiMul.dat.dpWat_nominal / 2.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:69:3-80:79:writable] Warning: Parameter coiMul.dat.cap_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.None then 0.0 else if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorMultiStage or coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorVariableSpeed then coiMul.dat.datCoi.sta[coiMul.dat.datCoi.nSta].nomVal.Q_flow_nominal else if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -1e4 else 1e4) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter coiMul.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 50.0 + 273.15 else if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 7.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter coiMul.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if coiMul.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 30.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiMul.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:20:3-31:79:writable] Warning: Parameter non.dat.mAir_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorMultiStage or non.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorVariableSpeed then non.dat.datCoi.sta[non.dat.datCoi.nSta].nomVal.m_flow_nominal else 1.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:32:3-40:69:writable] Warning: Parameter non.dat.dpAir_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.None then 0.0 else 100.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter non.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then non.dat.Q_flow_nominal / 4186.0 / 10.0 else if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -non.dat.Q_flow_nominal / 4186.0 / 5.0 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter non.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 5000.0 else if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 3e4 else 0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter non.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typVal == Buildings.Templates.Components.Types.Valve.None then 0.0 else non.dat.dpWat_nominal / 2.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:69:3-80:79:writable] Warning: Parameter non.dat.cap_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.None then 0.0 else if non.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorMultiStage or non.dat.typ == Buildings.Templates.Components.Types.Coil.EvaporatorVariableSpeed then non.dat.datCoi.sta[non.dat.datCoi.nSta].nomVal.Q_flow_nominal else if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then -1e4 else 1e4) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter non.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedHeating then 50.0 + 273.15 else if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 7.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter non.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=if non.dat.typ == Buildings.Templates.Components.Types.Coil.WaterBasedCooling then 30.0 + 273.15 else 273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter non.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
Notification: Performance of NFFlatten.flatten: time 0.04858/3.224, allocations: 25.06 MB / 1.895 GB, free: 8.766 MB / 1.342 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.02611/3.25, allocations: 9.859 MB / 1.905 GB, free: 14.79 MB / 1.357 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.03746/3.287, allocations: 12.1 MB / 1.916 GB, free: 2.707 MB / 1.357 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01902/3.306, allocations: 7.708 MB / 1.924 GB, free: 11 MB / 1.373 GB
Notification: Performance of NFPackage.collectConstants: time 0.008033/3.314, allocations: 1.711 MB / 1.926 GB, free: 9.285 MB / 1.373 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.03531/3.35, allocations: 12.31 MB / 1.938 GB, free: 12.95 MB / 1.389 GB
Notification: Performance of NFScalarize.scalarize: time 0.009756/3.36, allocations: 4.453 MB / 1.942 GB, free: 8.484 MB / 1.389 GB
Notification: Performance of NFVerifyModel.verify: time 0.02276/3.382, allocations: 7.741 MB / 1.95 GB, free: 0.7109 MB / 1.389 GB
Notification: Performance of NFConvertDAE.convert: time 0.0643/3.447, allocations: 30.11 MB / 1.979 GB, free: 2.516 MB / 1.42 GB
Notification: Performance of FrontEnd - DAE generated: time 6.272e-06/3.447, allocations: 0 / 1.979 GB, free: 2.516 MB / 1.42 GB
Notification: Performance of FrontEnd: time 1.774e-06/3.447, allocations: 0 / 1.979 GB, free: 2.516 MB / 1.42 GB
Notification: Performance of Transformations before backend: time 0.0008712/3.448, allocations: 0 / 1.979 GB, free: 2.516 MB / 1.42 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 1425
 * Number of variables: 1425
Notification: Performance of Generate backend data structure: time 0.06078/3.508, allocations: 14.77 MB / 1.993 GB, free: 3.523 MB / 1.436 GB
Notification: Performance of prepare preOptimizeDAE: time 6.557e-05/3.509, allocations: 12.91 kB / 1.993 GB, free: 3.512 MB / 1.436 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.06809/3.577, allocations: 7.959 MB / 2.001 GB, free: 11.53 MB / 1.451 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.04075/3.617, allocations: 12.43 MB / 2.013 GB, free: 15 MB / 1.467 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.001838/3.619, allocations: 0.9538 MB / 2.014 GB, free: 13.96 MB / 1.467 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.004976/3.624, allocations: 0.6171 MB / 2.015 GB, free: 13.35 MB / 1.467 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.04655/3.671, allocations: 12.31 MB / 2.027 GB, free: 0.957 MB / 1.467 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0002515/3.671, allocations: 0 / 2.027 GB, free: 0.957 MB / 1.467 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.002912/3.674, allocations: 236 kB / 2.027 GB, free: 0.7266 MB / 1.467 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0002696/3.674, allocations: 215 kB / 2.027 GB, free: 0.5156 MB / 1.467 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.05333/3.728, allocations: 15.09 MB / 2.042 GB, free: 1.414 MB / 1.482 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.1181/3.846, allocations: 48.95 MB / 2.09 GB, free: 15.28 MB / 1.545 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.05514/3.901, allocations: 13.14 MB / 2.103 GB, free: 2.113 MB / 1.545 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.0214/3.923, allocations: 6.679 MB / 2.109 GB, free: 11.43 MB / 1.561 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.05299/3.976, allocations: 27.06 MB / 2.136 GB, free: 15.16 MB / 1.592 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.02519/4.001, allocations: 8.037 MB / 2.143 GB, free: 7.078 MB / 1.592 GB
Notification: Performance of pre-optimization done (n=406): time 1.284e-05/4.001, allocations: 0 / 2.143 GB, free: 7.078 MB / 1.592 GB
Notification: Performance of matching and sorting (n=412): time 0.9786/4.98, allocations: 41.89 MB / 2.184 GB, free: 0.655 GB / 1.607 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001162/4.98, allocations: 223.9 kB / 2.185 GB, free: 0.6548 GB / 1.607 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter non.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter non.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter non.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:69:3-80:79:writable] Warning: Parameter non.dat.cap_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter non.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter non.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter non.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:32:3-40:69:writable] Warning: Parameter non.dat.dpAir_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:20:3-31:79:writable] Warning: Parameter non.dat.mAir_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=1.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiMul.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter coiMul.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter coiMul.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:69:3-80:79:writable] Warning: Parameter coiMul.dat.cap_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=coiMul.dat.datCoi.sta[2].nomVal.Q_flow_nominal) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter coiMul.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter coiMul.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter coiMul.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:20:3-31:79:writable] Warning: Parameter coiMul.dat.mAir_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=coiMul.dat.datCoi.sta[2].nomVal.m_flow_nominal) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiEva.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter coiEva.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter coiEva.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:69:3-80:79:writable] Warning: Parameter coiEva.dat.cap_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=coiEva.dat.datCoi.sta[1].nomVal.Q_flow_nominal) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter coiEva.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter coiEva.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter coiEva.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:20:3-31:79:writable] Warning: Parameter coiEva.dat.mAir_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=coiEva.dat.datCoi.sta[1].nomVal.m_flow_nominal) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiEle.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:102:3-110:24:writable] Warning: Parameter coiEle.dat.TAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:92:3-101:24:writable] Warning: Parameter coiEle.dat.TWatEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=273.15) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:61:3-68:84:writable] Warning: Parameter coiEle.dat.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:51:3-60:24:writable] Warning: Parameter coiEle.dat.dpWat_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:41:3-50:58:writable] Warning: Parameter coiEle.dat.mWat_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Templates/Components/Data/Coil.mo:111:3-117:80:writable] Warning: Parameter coiHea.dat.wAirEnt_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.01) as default value.
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.02445/5.004, allocations: 14.08 MB / 2.198 GB, free: 0.6497 GB / 1.607 GB
Notification: Performance of collectPreVariables (initialization): time 0.002152/5.006, allocations: 172 kB / 2.199 GB, free: 0.6496 GB / 1.607 GB
Notification: Performance of collectInitialEqns (initialization): time 0.005618/5.012, allocations: 4.858 MB / 2.203 GB, free: 0.6461 GB / 1.607 GB
Notification: Performance of collectInitialBindings (initialization): time 0.002328/5.014, allocations: 1.366 MB / 2.205 GB, free: 0.6451 GB / 1.607 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.003556/5.018, allocations: 1.327 MB / 2.206 GB, free: 0.6446 GB / 1.607 GB
Notification: Performance of setup shared object (initialization): time 4.682e-05/5.018, allocations: 303.8 kB / 2.206 GB, free: 0.6443 GB / 1.607 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.02108/5.039, allocations: 7.747 MB / 2.214 GB, free: 0.6416 GB / 1.607 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.02225/5.061, allocations: 8.729 MB / 2.222 GB, free: 0.6366 GB / 1.607 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: coiEle.hex.vol.dynBal.medium.p = coiEle.hex.vol.dynBal.p_start (bouAirLvg.p = coiEle.hex.vol.dynBal.p_start)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: coiEva.hex.vol.dynBal.medium.p = coiEva.hex.vol.dynBal.p_start (bouAirLvg.p = coiEva.hex.vol.dynBal.p_start)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: coiMul.hex.vol.dynBal.medium.p = coiMul.hex.vol.dynBal.p_start (bouAirLvg.p = coiMul.hex.vol.dynBal.p_start)
Notification: Performance of analyzeInitialSystem (initialization): time 0.4234/5.485, allocations: 158.6 MB / 2.377 GB, free: 496 MB / 1.607 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 2.708e-05/5.485, allocations: 8 kB / 2.377 GB, free: 496 MB / 1.607 GB
Notification: Performance of matching and sorting (n=664) (initialization): time 0.09272/5.578, allocations: 21.11 MB / 2.398 GB, free: 474.8 MB / 1.607 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0002633/5.578, allocations: 243.9 kB / 2.398 GB, free: 474.5 MB / 1.607 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.995e-05/5.578, allocations: 16 kB / 2.398 GB, free: 474.5 MB / 1.607 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.009527/5.587, allocations: 2.522 MB / 2.4 GB, free: 471.9 MB / 1.607 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01498/5.602, allocations: 2.195 MB / 2.403 GB, free: 469.7 MB / 1.607 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02454/5.627, allocations: 28.73 MB / 2.431 GB, free: 439.2 MB / 1.607 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01819/5.645, allocations: 1.225 MB / 2.432 GB, free: 438 MB / 1.607 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002341/5.648, allocations: 323.7 kB / 2.432 GB, free: 437.7 MB / 1.607 GB
Warning: Assuming fixed start value for the following 2 variables:
         coiMul.hex.watVapEva.off:DISCRETE(fixed = true protected = true )  "Signal, true when component is off" type: Boolean
         coiEva.hex.watVapEva.off:DISCRETE(fixed = true protected = true )  "Signal, true when component is off" type: Boolean
Warning: The initial conditions are over specified. The following 3 initial equations are redundant, so they are removed from the initialization system:
         coiEle.hex.vol.dynBal.medium.p = coiEle.hex.vol.dynBal.p_start
         coiEva.hex.vol.dynBal.medium.p = coiEva.hex.vol.dynBal.p_start
         coiMul.hex.vol.dynBal.medium.p = coiMul.hex.vol.dynBal.p_start.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0278/5.675, allocations: 10.98 MB / 2.443 GB, free: 426.7 MB / 1.607 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.02134/5.697, allocations: 8.678 MB / 2.451 GB, free: 417.6 MB / 1.607 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: coiEle.hex.vol.dynBal.medium.p = coiEle.hex.vol.dynBal.p_start (bouAirLvg.p = coiEle.hex.vol.dynBal.p_start)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: coiEva.hex.vol.dynBal.medium.p = coiEva.hex.vol.dynBal.p_start (bouAirLvg.p = coiEva.hex.vol.dynBal.p_start)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: coiMul.hex.vol.dynBal.medium.p = coiMul.hex.vol.dynBal.p_start (bouAirLvg.p = coiMul.hex.vol.dynBal.p_start)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.4144/6.111, allocations: 158.2 MB / 2.606 GB, free: 258.8 MB / 1.607 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 2.11e-05/6.111, allocations: 7.938 kB / 2.606 GB, free: 258.8 MB / 1.607 GB
Notification: Performance of matching and sorting (n=664) (initialization_lambda0): time 0.09075/6.202, allocations: 20.9 MB / 2.626 GB, free: 237.7 MB / 1.607 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0002371/6.202, allocations: 244.3 kB / 2.626 GB, free: 237.4 MB / 1.607 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.331e-05/6.202, allocations: 19.94 kB / 2.626 GB, free: 237.4 MB / 1.607 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.008404/6.211, allocations: 2.39 MB / 2.629 GB, free: 235 MB / 1.607 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01412/6.225, allocations: 2.075 MB / 2.631 GB, free: 232.9 MB / 1.607 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02051/6.246, allocations: 22.59 MB / 2.653 GB, free: 208.8 MB / 1.607 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01835/6.264, allocations: 1.268 MB / 2.654 GB, free: 207.5 MB / 1.607 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002217/6.266, allocations: 323.5 kB / 2.654 GB, free: 207.2 MB / 1.607 GB
Warning: Assuming fixed start value for the following 2 variables:
         coiMul.hex.watVapEva.off:DISCRETE(fixed = true protected = true )  "Signal, true when component is off" type: Boolean
         coiEva.hex.watVapEva.off:DISCRETE(fixed = true protected = true )  "Signal, true when component is off" type: Boolean
Warning: The initial conditions are over specified. The following 3 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         coiEle.hex.vol.dynBal.medium.p = coiEle.hex.vol.dynBal.p_start
         coiEva.hex.vol.dynBal.medium.p = coiEva.hex.vol.dynBal.p_start
         coiMul.hex.vol.dynBal.medium.p = coiMul.hex.vol.dynBal.p_start.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 75
 * Number of states: 0 ()
 * Number of discrete variables: 68 (coiEva.hex.i_x,coiMul.hex.i_x,$whenCondition15,$whenCondition14,$whenCondition13,coiHea.hex.flowRegime_nominal,coiHea.hex.flowRegime,coiCoo.hex.flowRegime_nominal,coiCoo.hex.dryWetCalcs.fullyDry.cfg,coiCoo.hex.dryWetCalcs.fullyWet.cfg,coiCoo.hex.dryWetCalcs.cfg,coiCoo.hex.flowRegime,coiCoo.hex.UAFroRated.isFulWet,coiCoo.hex.UAFroRated.isFulDry,$PRE.y1.idx,$PRE.y1.y[1],$PRE.coiMul.hex.watVapEva.off,$PRE.coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[2],$PRE.coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[1],$PRE.coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[2],$PRE.coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[1],$PRE.coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[2],$PRE.coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[1],$PRE.coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[2],$PRE.coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[1],$PRE.coiEva.hex.deaBan.y,$PRE.coiEva.hex.watVapEva.off,$PRE.coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[1],$PRE.coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[1],$PRE.coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[1],$PRE.coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[1],y1.idx,y1.y[1],coiMul.hex.watVapEva.off,coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[2],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[1],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[2],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[1],coiMul.hex.dxCoi.dryCoi.coiCap.stage,coiMul.hex.dxCoi.wetCoi.shr.on,coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[2],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[1],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[2],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[1],coiMul.hex.dxCoi.wetCoi.coiCap.stage,coiEva.hex.deaBan.y,coiEva.hex.watVapEva.off,coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[1],coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[1],coiEva.hex.dxCoi.dryCoi.coiCap.stage,coiEva.hex.dxCoi.wetCoi.shr.on,coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[1],coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[1],coiEva.hex.dxCoi.wetCoi.coiCap.stage,$whenCondition1,$whenCondition2,$whenCondition3,$whenCondition4,$whenCondition5,$whenCondition6,$whenCondition7,$whenCondition8,$whenCondition9,$whenCondition10,$whenCondition11,$whenCondition12,$whenCondition16,$whenCondition17)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (609):
 * Single equations (assignments): 574
 * Array equations: 5
 * Algorithm blocks: 6
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 11
 * Torn equation systems: 13
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 0 systems
 * Non-linear Jacobian (size): 11 systems
   {1, 1, 1, 7, 7, 1, 1, 1, 1, 1, 1}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 0 systems
 * Non-linear torn systems (#iteration vars, #inner vars): 13 systems
   {(1,2), (1,4), (1,2), (5,2), (1,1), (1,2), (1,2), (1,1), (1,2), (1,2), (1,2), (1,2), (1,2)}
Notification: Performance of prepare postOptimizeDAE: time 0.002512/6.269, allocations: 0.5413 MB / 2.655 GB, free: 206.6 MB / 1.607 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.003676/6.272, allocations: 1.042 MB / 2.656 GB, free: 205.6 MB / 1.607 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.08508/6.357, allocations: 17.85 MB / 2.673 GB, free: 187.6 MB / 1.607 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 6.004e-05/6.358, allocations: 51.98 kB / 2.673 GB, free: 187.6 MB / 1.607 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 1.431e-05/6.358, allocations: 0 / 2.673 GB, free: 187.6 MB / 1.607 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.07686/6.434, allocations: 16 MB / 2.689 GB, free: 171.5 MB / 1.607 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1153/6.55, allocations: 35.13 MB / 2.723 GB, free: 136.2 MB / 1.607 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 6.12e-05/6.55, allocations: 15.98 kB / 2.723 GB, free: 136.2 MB / 1.607 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01212/6.562, allocations: 1.673 MB / 2.725 GB, free: 134.5 MB / 1.607 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.004501/6.567, allocations: 1.437 MB / 2.726 GB, free: 133.1 MB / 1.607 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.001752/6.568, allocations: 195.8 kB / 2.727 GB, free: 132.9 MB / 1.607 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.01447/6.583, allocations: 17.5 MB / 2.744 GB, free: 114.3 MB / 1.607 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.101e-05/6.583, allocations: 24.39 kB / 2.744 GB, free: 114.3 MB / 1.607 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1054/6.688, allocations: 26.28 MB / 2.769 GB, free: 87.78 MB / 1.607 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.009619/6.698, allocations: 3.111 MB / 2.772 GB, free: 84.63 MB / 1.607 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.004526/6.702, allocations: 160 kB / 2.773 GB, free: 84.48 MB / 1.607 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.01593/6.718, allocations: 1.129 MB / 2.774 GB, free: 83.35 MB / 1.607 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001421/6.72, allocations: 366.3 kB / 2.774 GB, free: 82.99 MB / 1.607 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001252/6.721, allocations: 243.7 kB / 2.774 GB, free: 82.75 MB / 1.607 GB
Notification: Performance of sorting global known variables: time 0.01908/6.74, allocations: 9.772 MB / 2.784 GB, free: 73.02 MB / 1.607 GB
Notification: Performance of sort global known variables: time 4.1e-07/6.74, allocations: 0 / 2.784 GB, free: 73.02 MB / 1.607 GB
Notification: Performance of remove unused functions: time 0.02156/6.762, allocations: 4.38 MB / 2.788 GB, free: 68.69 MB / 1.607 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 51
 * Number of states: 13 (coiCoo.val.val.filter.s[1],coiCoo.val.val.filter.s[2],coiCoo.hex.dryWetCalcs.fullyWet.TWatOutEst,coiHea.val.val.filter.s[1],coiHea.val.val.filter.s[2],coiEle.hex.vol.dynBal.medium.Xi[1],coiEle.hex.vol.dynBal.U,coiEva.hex.vol.dynBal.medium.Xi[1],coiEva.hex.vol.dynBal.U,coiEva.hex.watVapEva.m,coiMul.hex.vol.dynBal.medium.Xi[1],coiMul.hex.vol.dynBal.U,coiMul.hex.watVapEva.m)
 * Number of discrete variables: 40 ($whenCondition17,$whenCondition16,$whenCondition15,$whenCondition14,$whenCondition13,$whenCondition12,$whenCondition11,$whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,coiEva.hex.dxCoi.wetCoi.coiCap.stage,coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[1],coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[1],coiEva.hex.dxCoi.wetCoi.shr.on,coiEva.hex.dxCoi.dryCoi.coiCap.stage,coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[1],coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[1],coiEva.hex.watVapEva.off,coiEva.hex.deaBan.y,coiMul.hex.dxCoi.wetCoi.coiCap.stage,coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[1],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[2],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[1],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[2],coiMul.hex.dxCoi.wetCoi.shr.on,coiMul.hex.dxCoi.dryCoi.coiCap.stage,coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[1],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[2],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[1],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[2],coiMul.hex.watVapEva.off,y1.y[1],y1.idx)
 * Number of discrete states: 15 (coiEva.hex.deaBan.y,coiEva.hex.watVapEva.off,coiEva.hex.dxCoi.wetCoi.coiCap.stage,coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[coiEva.hex.dxCoi.wetCoi.coiCap.stage],coiEva.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[coiEva.hex.dxCoi.wetCoi.coiCap.stage],coiEva.hex.dxCoi.dryCoi.coiCap.stage,coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[coiEva.hex.dxCoi.dryCoi.coiCap.stage],coiEva.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[coiEva.hex.dxCoi.dryCoi.coiCap.stage],coiMul.hex.watVapEva.off,coiMul.hex.dxCoi.wetCoi.coiCap.stage,coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTEva[coiMul.hex.dxCoi.wetCoi.coiCap.stage],coiMul.hex.dxCoi.wetCoi.coiCap.checkBoundsTCon[coiMul.hex.dxCoi.wetCoi.coiCap.stage],coiMul.hex.dxCoi.dryCoi.coiCap.stage,coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTEva[coiMul.hex.dxCoi.dryCoi.coiCap.stage],coiMul.hex.dxCoi.dryCoi.coiCap.checkBoundsTCon[coiMul.hex.dxCoi.dryCoi.coiCap.stage])
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (405):
 * Single equations (assignments): 370
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 3
 * When equations: 14
 * If-equations: 0
 * Equation systems (not torn): 10
 * Torn equation systems: 8
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 0 systems
 * Non-linear Jacobian (size): 10 systems
   {7, 1, 7, 1, 1, 1, 1, 1, 1, 1}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 0 systems
 * Non-linear torn systems (#iteration vars, #inner vars): 8 systems
   {(1,1), (1,1), (1,4), (1,2), (1,1), (1,3), (1,3), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.004163/6.766, allocations: 1.195 MB / 2.789 GB, free: 67.64 MB / 1.607 GB
Notification: Performance of simCode: created initialization part: time 0.07838/6.844, allocations: 28.01 MB / 2.817 GB, free: 39.23 MB / 1.607 GB
Notification: Performance of simCode: created event and clocks part: time 1.688e-05/6.845, allocations: 8.938 kB / 2.817 GB, free: 39.22 MB / 1.607 GB
Notification: Performance of simCode: created simulation system equations: time 0.02341/6.868, allocations: 8.019 MB / 2.824 GB, free: 31.14 MB / 1.607 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.02642/6.894, allocations: 4.862 MB / 2.829 GB, free: 26.4 MB / 1.607 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.7231/7.618, allocations: 26.66 MB / 2.855 GB, free: 0.6312 GB / 1.607 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.01286/7.63, allocations: 6.106 MB / 2.861 GB, free: 0.6303 GB / 1.607 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.00589/7.636, allocations: 0.8763 MB / 2.862 GB, free: 0.6303 GB / 1.607 GB
Notification: Performance of SimCode: time 1.072e-06/7.636, allocations: 0 / 2.862 GB, free: 0.6303 GB / 1.607 GB
Notification: Performance of Templates: time 2.571/10.21, allocations: 1.518 GB / 4.38 GB, free: 409.6 MB / 1.607 GB
make -j1 -f Buildings_10_Buildings.Templates.Components.Validation.Coils.makefile
make -j1 -f Buildings_10_Buildings.Templates.Components.Validation.Coils.makefile clang++ -std=c++17  -fopenmp=libomp  -Winvalid-pch -O2 -g -DNDEBUG -fPIC   -std=c++11 -DBOOST_ALL_DYN_LINK   -DUSE_DGESV -DUSE_LOGGER -DOMC_BUILD -DUSE_THREAD -DSUNDIALS_MAJOR_VERSION=5 -DSUNDIALS_MINOR_VERSION=4 -DPMC_USE_SUNDIALS -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/" -I. "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Resources/C-Sources" -I"." -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/include/omc/sundials" "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Resources/C-Sources"    -DMEASURETIME_PROFILEBLOCKS -DUSE_LOGGER  -c -o OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.o OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.cpp
In file included from OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.cpp:29:
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:3945:14: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_wetCoi_P_appDewPt_P_uacpcoiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage__P_UAcp_'
    tmp194 = coiMul_P_hex_P_dxCoi_P_wetCoi_P_appDewPt_P_uacpcoiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage__P_UAcp_;
             ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8294:138: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunT_, (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp453);
                                                                                                                                         ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8294:227: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunT_, (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp453);
                                                                                                                                                                                                                                  ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8294:66: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunT_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunT_, (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp453);
                                                                 ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8300:69: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunFF_'
      _functions->Buildings_Fluid_Utilities_extendedPolynomial(1.0, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunFF_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_, tmp456);
                                                                    ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8300:141: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_'
      _functions->Buildings_Fluid_Utilities_extendedPolynomial(1.0, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunFF_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_, tmp456);
                                                                                                                                            ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8300:210: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_'
      _functions->Buildings_Fluid_Utilities_extendedPolynomial(1.0, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_capFunFF_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_, tmp456);
                                                                                                                                                                                                                 ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8306:138: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunT_, (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp459);
                                                                                                                                         ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8306:227: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunT_, (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp459);
                                                                                                                                                                                                                                  ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8306:66: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunT_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunT_, (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp459);
                                                                 ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8312:69: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunFF_'
      _functions->Buildings_Fluid_Utilities_extendedPolynomial(1.0, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunFF_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_, tmp462);
                                                                    ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8312:141: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_'
      _functions->Buildings_Fluid_Utilities_extendedPolynomial(1.0, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunFF_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_, tmp462);
                                                                                                                                            ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8312:210: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_'
      _functions->Buildings_Fluid_Utilities_extendedPolynomial(1.0, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_EIRFunFF_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMin_, coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_staiSta__P_perCur_P_ffMax_, tmp462);
                                                                                                                                                                                                                 ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8297:7: warning: expression result unused [-Wunused-value]
      tmp455;
      ^~~~~~
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8303:7: warning: expression result unused [-Wunused-value]
      tmp458;
      ^~~~~~
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8309:7: warning: expression result unused [-Wunused-value]
      tmp461;
      ^~~~~~
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8315:7: warning: expression result unused [-Wunused-value]
      tmp464;
      ^~~~~~
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8364:137: error: no matching function for call to object of type 'WrapArray<bool>'
  SystemDefaultImplementation::setBoolStartValue(__omcQ_24whenCondition12_, ((_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_ == 2) && _discrete_events->pre(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_checkBoundsTCon_)(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_)), false);
                                                                                                                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:704:14: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:695:20: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
In file included from OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.cpp:29:
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8373:137: error: no matching function for call to object of type 'WrapArray<bool>'
  SystemDefaultImplementation::setBoolStartValue(__omcQ_24whenCondition10_, ((_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_ == 1) && _discrete_events->pre(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_checkBoundsTCon_)(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_)), false);
                                                                                                                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:704:14: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:695:20: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
In file included from OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.cpp:29:
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8392:137: error: no matching function for call to object of type 'WrapArray<bool>'
  SystemDefaultImplementation::setBoolStartValue(__omcQ_24whenCondition11_, ((_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_ == 2) && _discrete_events->pre(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_checkBoundsTEva_)(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_)), false);
                                                                                                                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:704:14: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:695:20: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
In file included from OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.cpp:29:
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8401:136: error: no matching function for call to object of type 'WrapArray<bool>'
  SystemDefaultImplementation::setBoolStartValue(__omcQ_24whenCondition9_, ((_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_ == 1) && _discrete_events->pre(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_checkBoundsTEva_)(_coiMul_P_hex_P_dxCoi_P_dryCoi_P_coiCap_P_stage_)), false);
                                                                                                                                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:704:14: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:695:20: note: candidate function not viable: no known conversion from 'int' to 'const vector<size_t>' (aka 'const vector<unsigned long>') for 1st argument
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
In file included from OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.cpp:29:
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8459:138: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_perCur_P_capFunT_, (coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp471);
                                                                                                                                         ^
./OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsInitialize.cpp:8459:227: error: use of undeclared identifier 'coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_'
      _functions->Buildings_Utilities_Math_Functions_biquadratic(coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_perCur_P_capFunT_, (coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_nomVal_P_TEvaIn_nominal_ - 273.15), (coiMul_P_hex_P_dxCoi_P_wetCoi_P_coiCap_P_staiSta__P_nomVal_P_TConIn_nominal_ - 273.15), tmp471);
                                                                                                                                                                                                                                  ^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
4 warnings and 20 errors generated.
make: *** [<builtin>: OMCppBuildings_10_Buildings.Templates.Components.Validation.CoilsCalcHelperMain.o] Error 1